Customers compare AMSC2 to these similar products
Products Featured in this Video
Today on our 2006 Chevrolet Silverado well be test fitting the Convert-A-Ball cushioned ball mount for two inch hitches with three-quarter inch rise or two inch drop, rated at 10,000 pounds. Before we test fit out ball mount well first need to get our hitch height measurement. To do this well measure from the top of the receiver tube opening to the ground. On this truck that measurement is 19 inches. Keep in mind that measurement can vary due to hitch style, tire size, or any other accessory that may affect your vehicles ride height, so its a good idea to measure yours. Now that we have our hitch height measurement well go ahead and slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin.
Well then put the clip on the other side of the pin, securing the ball mount to the vehicle. Now our ball mount is in the drop position. From the top of the platform to the ground measures 17 inches. Well next turn our ball mount over into the rise position. From the top of the ball mount platform to the ground with the ball mount in the rise position is 19 inches.
Thats it for the Convert-A-Ball cushioned ball mount for two inch hitches, part number AMSC2 on our 2006 Chevrolet Silverado.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
