# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Well built hitch just the right amount of drop for my 2014 Yukon.
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 2
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
# 3
Convert-A-Ball Ball Mount for 2" Hitches - 6-3/4" Rise, 8" Drop - 10,000 lbs
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
# 4
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
Haven’t used it yet, but looks good. I’m not sure what height offset I need, so this kit gives me several options, plus two ball sizes. Really good value.
I installed the draw tite hitch onto my brand new 2018 Subaru outback. I'm 68 years old, not as strong as I was, but proud to say I did the job all by myself in about 4 hours. Here are some tips you may find useful. Watch the video-it’s pretty good. I had difficulty getting the exhaust system down and worried about getting it up again from the moment I got it down...read on-help will follow. I bought a stepup drill bit which worked great for drilling the hole in the chasis. I clamped the hitch onto a floor jack, then rolled it and raised it into position. Used metal shears to easily cut out the heat shield as per the video. Your inclination will be the screw the fishing tool provided all the way up the carriage bolt. That won’t work; just screw it on to the tip of the bolt. I couln’t get the exhaust hangars in place even after lubricating them with wd-40. I dropped the rubber hangars into undiluted liquid car wash soap which made them much more slippery than the wd-40. After that the rubber hangars slipped into place pretty easily-that’s my best tip. Finding the electric connection plug for the wiring harness was almost as hard as installing the hitch. I was very happy with how the job came out. Good luck.
# 5
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Very solid. Use to flat tow my Jeep behind our Yukon.
This fits my GMC Yukon with the receiver coming out of the bumper perfectly. My trailer now rides level.
# 6
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.
# 7
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 8
Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
Heavy Duty Drop Down Hitch no problem pulling a 10,000# trailer
It fits perfect on my f350 diesel, super heavy duty. I'll be using it for towing my car tilt bed trailer.
# 9
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Well built hitch just the right amount of drop for my 2014 Yukon.
The product is good but a bit tideous and after installing it my bracket fell and it was a pain to get replace it support made me buy the replacement pieces and the bracket didnt come with just the bolts, and at the end they told i have i had to buy the whole unit because based on their system my truck didnt have issues with installement and the manufacturer didnt supply that bracket cause it special order so in general i dont recommend in my choice better to get it welded.
# 10
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
It did the trick, although it is starting to rust.
# 11
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
I've used the hitch over the last year on several trailers and loads. The adjustability made towing a much better feel and ride over a fixed hitch that at times not the greatest. I see no wear, very easy to adjust even once coupled to the trailer and finding the trailer needs to be leveled better.
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
# 12
Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs
I sought this concept out to cure how rough my trailers were pulling behind my Yukon. This made a huge difference when I upgraded to it from a standard, non-shock absorbing receiver. I use this with a 21' boat & a 18' flatbed - would recommend it highly.
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
# 13
Curt Ball Mount for 2" Hitches - 7" Rise, 8-1/4" Drop - 9-3/8" Long - 10,000 lbs
After a year the mount shows no wear at all I would recommend this product to any one needing a good hitch mount, with a large rise and drop.
Was needing a 7-8 inch ride for my camper that could sustain a GVW of at least 5000 lbs. Let me say, it’s a hard to find item. Thankfully I called Etraer and with some research, found me the perfect ball mount. It’s heavy duty for a reasonable price.
# 14
Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Shipped fast once the order was processed (thanks to help from customer service). Hitch, ball, and pins look great! I will order from etrailer again if I need anything. Great website!
Very fast shipping. Very pleased with this heavy duty drop hitch. I traded vehicles to a GMC Yukon and had difficulty finding a 10 inch drop to pull my 16 foot retro travel trailer. I was so pleased that I immediately ordered a couple more things from etrailer.com. Thanks!
# 16
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
perfect product - super heavy duty, very fast delivery
High quality build, high towing capacity, very flexible - will adjust to a wide variety of hitch heights. Reasonable price and fast delivery!
# 17
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 10" Drop
Very pleased with product, looks awesome on my lifted 01 Ford Superduty F-350. This 10 inch drop allowed me to keep my trailer level when hauling my 4 wheeler. Just in time for opening day.
Product looks and feels great. Only reason it got a 4/5 is because a truck driver friend of mine told me that he had one and the shank wore down from rubbing on steel bc of the aluminum on steel receiver contact. I might rig up a thin steel collar for it to prevent any degradation down the road. Works great on my truck with 7 inches of lift and 35" tires. Buy the Andersen Stainless steel locking pins for it so it doesn't walk off. New pins have better corrosion resistance and are less easily picked by thieves than standard barrel locks, plus they match the look.
# 18
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 11-1/4" Long - 10K
Well built hitch just the right amount of drop for my 2014 Yukon.
Did not fit my application been sitting on a shelf
# 19
Curt Multi-Ball Mount w/ Tow Hook for 2" Hitches
Cool to follow up on your product. The multi-ball works as it should. I bought it since I didn't know if the trailer I would get would be 2" or 2 1/4. I tow a 4,000 # trailer/race car with it. It's a heavy piece to carry around, but I feel that it will last a good many years. I did make a spacer to cram into the receiver, so the hitch doesn't rattle as much. Otherwise it's great. Tim E.
the packaging showed up as a mess, need to see if its damaged when I open it
# 20
B&W Tow & Stow 2-Ball Mount - 2-1/2" Hitch - 7-1/2" Drop/Rise - 18K - Black
Fast shipping! Thanks!
I USED IT ON MY WIFE YUKON ONLY IN THE SUMMER MONTH AND IT REALLY NICE AND I DON'T WANT ANY RUST ON IT I ALSO HAVE A BLACK ONE ON MY WORK TRUCK IT A NICE HITCH LONG AS YOU KEEP THE PINS GREASE
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"