Summer Starts Here - Save up to 70%
# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Overall, I am extremely satisfied with the products I bought. Your communications are excellent; shipping was performed in an expedient manner and the tracking of the packages was much appreciated. I'm not sure I'll be buying anything else from you (I can't imagine needing another tow bar again) but will surely recommend your company if asked.
Fits loosely into the hitch, along with a loose fitting pin. Thus, your trailer will constantly rattle and clang every 10th of a mile that you drive. It will drive you crazy and insane thinking that your trailer with your $50,000 boat or camper will disconnect and be left along the highway behind you for all semi-trucks to run over and shred to thousands of bits and pieces.
# 2
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
The draw bar is absolutely perfect! all other internet and local hitch installer contacts said no one makes a 1 1/4" draw bar with a 6" drop. first picture is my original draw bar with a 2.5" drop. the trailer was running quite high. number 2,3,4 are with your Brophy draw bar you can really see the trailer is level.I took a measurement that may come in handy in your files. my car is a 2012 ford escape with a factory trailer package . The measurement from the center of my receiver to the ground is 18"1/4" trailer tires are 5.30x12 This is my new car and I was surprised at the height. the Ford dealer was no help so possibly you can supply other 4 wheel drive escapes with draw bars.
This hitch worked great. Nearly leveled my utility trailer behind my escape.
# 3
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Great product
With a receiver hitch already installed on a ford escape all my receivers are 2 inch but the one on the escape is 1 1/2 inch so I had a problem that etrailer had a solution for , the proper sized hitch that works great .
# 4
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Great product
Looked everywhere for the right hitch tô fit my Ford Escape. Finally found it here. It fits perfect and delivery was fast. Will definitely be ordering from you again. Thank you.
# 5
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
no problem with this part.
Works great with my new Kurt receiver hitch and the drop is perfect for a level tow on a '08 Ford Escape.
# 6
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Nice items...all carefully packaged and individually separated for shipping...much appreciate the extra effort!!!!!
Looks good
# 7
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 8
Draw-Tite Drawbar for 1-1/4" Hitches - 4-3/4" Drop - 7-1/2" Long - 3,500 lbs
Top quality Drawbar, great service.
Great services.
# 9
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs
no problem with this part.
Perfect fit for a factory-installed classI II hitch on a 2010 Ford Escape.
# 10
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 11
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 12
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 13
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Very well made hitch and already put together. Very fast response on the order, got the order in only a few days.
This product came with a very thick powder coating, no scratches on paint. Seems like it's going to hold up to some abuse
# 14
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
No problem. Exactly what I needed
Looks great, if it holds up under use, then this is a great buy. Heavy duty, well spend money. I like the key lock, I have never seen this before but I can see you may have a need for locking your hitch at night in a motel parking lot or somewhere when you have to leave your hitch in your auto unattended.
# 15
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs
no problem with this part.
Works great with my new Kurt receiver hitch and the drop is perfect for a level tow on a '08 Ford Escape.
# 16
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
no problem with this part.
Works great with my new Kurt receiver hitch and the drop is perfect for a level tow on a '08 Ford Escape.
# 17
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Very well made hitch and already put together. Very fast response on the order, got the order in only a few days.
This product came with a very thick powder coating, no scratches on paint. Seems like it's going to hold up to some abuse
# 18
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Very well made hitch and already put together. Very fast response on the order, got the order in only a few days.
This product came with a very thick powder coating, no scratches on paint. Seems like it's going to hold up to some abuse
# 19
Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
Very well made hitch and already put together. Very fast response on the order, got the order in only a few days.
This product came with a very thick powder coating, no scratches on paint. Seems like it's going to hold up to some abuse
# 20
Reese Trailer Hitch Starter Ball Mount Kit
Feels strong .
What our customers are saying:
"Thank you! I enjoyed shopping your site."