Arrives before Christmas 
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at Reese's trailer hitch starter ball mount kit. This ball mount is designed for class two applications. It has a two inch ball on it with a maximum rating of 3,500 pounds for its gross towing capacity. And it also has a 300 pound tongue weight, which is the force going down on top of it. Typically, a trailer loaded up we'll have about 10% of its gross towing capacity as its tongue weight. So if you've got 3,000 pounds in your trailer, you've probably got about 300 pounds on top of your ball as long as you've got it loaded properly.
That's going to be perfect for our small utility trailer here that uses a two inch ball.And it slides on and locks into place. Now, one of the things you can do, we're not going to be doing it for demonstration purposes here, but to help reduce noise and wear on your ball, you can place a little bit of grease on the ball before each use. And you can see here, we've got a nice small utility trailer hooked up, and you can easily use this to haul around some dirt bikes or ATVs or even some jet-skis if you're going to head to the Lake for the weekend.This ball mount offers a one and a quarter inch drop and a three quarter inch rise. You can see we're currently in the rise position, and this is how it comes shipped to you, with the ball pre-installed. And with our vehicle here and our trailer, that's about perfect.
If we follow it back, it's nice and level going down our trailer, which is what you want when you tow. Having your weight excessively up or down is going to cause your load to be improper, which when starting, stopping, and turning is not going to transfer to your vehicle properly, causing it to feel unstable. By giving us the options to match our trailer, we can have the safest, most enjoyable towing experience.Now, if you want to put it in the drop position, you will have to take your ball off, flip it over, and then reinstall it. But one of the cool things that I like about this ball mount that others don't have, and the ball combination here, if you look, you can see grooves cut out in both the top and bottom side of our ball here. And what that does is it keeps our ball from spinning in the ball mount when we're tightening it down.
You can see here where the hex shape is pressed up against those grooves. With a lot of other ones, you don't have that, and so when you're trying to tighten up this nut, the ball just wants to spin in the mount, so you have to usually put it in a vice or something to hold it.But with this, you could actually just leave it in your hitch and loosen it up, flip it over, and then tighten it back down, which is pretty nice. Once you've got your ball moved to the position you want it in, you do want to make sure you tighten it and torque it to the specifications found on the ball mount here. And if you're worried about your trailer coming in close contact with the bumper or any accessories you have here at the front, this ball mount is extended to give you a little bit additional distance between the back of your vehicle and where your trailer attaches. From the center of our hitch pin hole to the center of where our ball is mounted, it's about nine inches, which is considerably longer than your typical ball mounts.And the entire thing is constructed of steel and protected against the elements with a black powder coat finish.
Our ball is also a solid steel with a chrome finish on it to help protect it from corrosion. When you're ready to use your ball mount, you can simply slide it into the receiver and secure it with the included hitch pin and clip. You do want to keep in mind that the sticker does cover up the holes. So we're just going to slide it in, push our pin through, and then secure it with the clip on the other side. And that completes our look at Reese's trailer hitch starter ball mount kit.
Average Customer Rating: 4.9 out of 5 stars (36 Customer Reviews)
Exactly what I needed. All my previous SUVs used 2x2 hitch mounts which now are useless.So I decided to gift them to my son. The hitch mount is well made. etrailer is fast and very easy to find exactly what you need at a fair price. Customer service is friendly and helpful.
I needed an very specific ball mount(class I, 1/2" rise, 2" ball). etrailer had what I needed in stock and available to ship next day. I had the thing ordered in 60 seconds. Wish I wouldn't have waisted my time and gas shopping at my local hardware stores only to find they didnt have what I needed.
Just put it on my John Deere x738 and fits perfect. Looking foward to trying it out.
Well made, just what I needed.
Just what i needed for my honda side by side. I like the one tool ball removal.
Ordered...came in a timely fashion and was everything as advertised.
This hitch does exactly what I expect it to do with no issues. I would have given it five stars if it brought me coffee in the mornings as well:)
Michelle
4/19/2022
The hitch is still doing exactly what I want it to do: I dont have to put any thought into its existence until I want to use it, and then I just have to remember where I put it. I get to spend my mental energy thinking about how to tie down the junk on my trailer and dont have any brain-strain related to the hitch at all.
Purchased this for my John Deere tractor.Shipping was super fast.Came well packaged..No damages what so ever..
Great hardware. Great price.
I called and talked to Steve Z. he was a very pleasant man to talk to.
I had my order all wrong and he got all straitened out. He shipped it out the same day, and I received in very quick time.
He is a very good representative for your company!
Very good construction, just like it was advertised, fits perfectly. I am very happy with it!
I have not used it yet but looks to be good quality and I'm sure it will be fine
Both units I ordered came as expected. Excellent quality, and shipped in a timely
manner.
Works as it should.
good quality.
Joe S.
9/4/2020
working just fine
Product as expected, fast shipping, packaged well.
Feels strong .
Works great.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John M.
2/25/2019
Excellent. No complaints. No problems. Thanks.