# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
I ordered this for my 2013 Toyota Sienna SE. I was a little nervous as the frame mounted hitch is low and tucked back in on my van but this thing fit perfect in the upturned position. It also gave me the perfect distance from the ground for my two trailers that I tow. Very heavy duty item and it fits well in the receiver. Ordered on a Sunday and received on a Wednesday - so very happy with the service.
I bought a hitch, stinger, ball and wiring harness for my 2004 Toyota Sienna. It was delivered fast, it was the right stuff, and it fit, just like it was supposed to. It really was as easy to install as it looked in your video. The video was immensely helpful too. The video showed me exactly what I needed to know to get my hitch installed correctly and it gave me the confidence to order online and do it myself. The only drawback is a loss of ground clearance but you warned me fair and square up front about that, so I can hardly complain. Thank you, that was a good investment.
# 2
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Purchased this a a hedge on hoping I would have the right part, and in that respect, it worked (barely). After mounting a 76112, I found my hitch receiver tube to be at 12" above the ground. I will be using the 5" rise ball mount with the 2" ball as my ball mount to attach a rental trailer which would like the ball to be at 18". That leaves a 1 7/8 ball and additional hitch ball mount to come up with something creative to do with.
This is exactly what was needed - we are pulling an 800 lb., single-axle lawn trailer and this setup is working very well. Installation took one afternoon and we were up and working the next day. THANK YOU!
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
I ordered this for my 2013 Toyota Sienna SE. I was a little nervous as the frame mounted hitch is low and tucked back in on my van but this thing fit perfect in the upturned position. It also gave me the perfect distance from the ground for my two trailers that I tow. Very heavy duty item and it fits well in the receiver. Ordered on a Sunday and received on a Wednesday - so very happy with the service.
# 4
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Quality, strength and value describe not only this product but the entire etrailer experience. Product selection features, clean website and buying confidence. This ball mount is exactly what I expected and the express delivery was a bonus. This is my second experience etrailer and it probably won't be my last.
Very sturdy product but hole for the ball was drilled off center - shifted 1/16" to the side. etrailer kindly replaced the original after seeing a picture showing the fault.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Exactly as advertised. No problems. I used it on a Toyota Sienna, which has a very low hitch receiver. I'm pulling a small utility trailer.
Came quicker than expected. All good .
# 6
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
Plugged right in. Worked great on my 2008 Toyota Sienna Van. Great information on correct size. Easy. Thanks
Flipped it for hight on a Toyota Sienna 2015 - Works Great!
# 7
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I bought the Curt D210 Multipurpose Ball mount to raise the level of a Kuat platform bike rack with extender for 4 bikes from my Drawtite hitch on a 2007 Toyota Sienna. Service from eTrailer was superb, the mount is extremely well-built, and it fits my Sienna/hitch like a glove. We used the rack with 4 road bikes on two trips this week-end and it worked flawlessly; not even a minor scrape through many driveways and turn-ins. The system does move the rack back a few inches; 50.5" from the bumper, so we needed a red flag on the end (at least in MO). This is the only nit in an otherwise great product.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 8
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Not a lot to say abou this other than the build quality and finish being excellent. As I said with the other part to this 3 part order, this company is Excellent to do business with. Professional. Great follow up.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 9
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
fits like a glove. works perfectly
etrailer shipped fast and had great communication. The hitch was built very well look like a quality product and was just what I needed. The 5 inch rise was perfect for our 2009 Toyota sienna.
# 10
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
etrailer shipped fast and had great communication. The hitch was built very well look like a quality product and was just what I needed. The 5 inch rise was perfect for our 2009 Toyota sienna.
Paint on draw bar was a little questionable. But it came that way from the manufacturer! Had nothing to do with Etrailer quality of service!
# 11
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Well made
Love the ball mount. I have a Toyota Sienna and the rear seats recess into a well, therefore the receiver hitch much go underneath the well. This means the ball mount enters the receiver approximately 10 inches off the ground. By using the ball mount to raise the ball, this makes the ball around 22 inches off the ground, which is recommended height for my trailer. My only regret is that I did not request you attach a ball as I did not have any wrenches large enough to fasten it. Again, the mount is great. Thanks, Ron Baker
# 12
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!
# 13
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
Came quicker than expected. All good .
Exactly as advertised. No problems. I used it on a Toyota Sienna, which has a very low hitch receiver. I'm pulling a small utility trailer.
# 14
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 15
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
I ordered this for my 2013 Toyota Sienna SE. I was a little nervous as the frame mounted hitch is low and tucked back in on my van but this thing fit perfect in the upturned position. It also gave me the perfect distance from the ground for my two trailers that I tow. Very heavy duty item and it fits well in the receiver. Ordered on a Sunday and received on a Wednesday - so very happy with the service.
I had trouble finding a 4-3/4" rise at any local stores. Etrailer shipped it out in a reasonable amount of time. Using this to pull a small trailer behind a Toyota Sienna and needed the 4-3/4" rise. Packaging needs some thought. 2" ball was coming out the side of the box when it was received.
# 16
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
Quality, strength and value describe not only this product but the entire etrailer experience. Product selection features, clean website and buying confidence. This ball mount is exactly what I expected and the express delivery was a bonus. This is my second experience etrailer and it probably won't be my last.
Very sturdy product but hole for the ball was drilled off center - shifted 1/16" to the side. etrailer kindly replaced the original after seeing a picture showing the fault.
# 17
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
Quality, strength and value describe not only this product but the entire etrailer experience. Product selection features, clean website and buying confidence. This ball mount is exactly what I expected and the express delivery was a bonus. This is my second experience etrailer and it probably won't be my last.
Fits perfect. Now my trailer is not hanging down anymore. It's level when it's hooked up. Thank you.
# 18
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
Very sturdy product but hole for the ball was drilled off center - shifted 1/16" to the side. etrailer kindly replaced the original after seeing a picture showing the fault.
Quality, strength and value describe not only this product but the entire etrailer experience. Product selection features, clean website and buying confidence. This ball mount is exactly what I expected and the express delivery was a bonus. This is my second experience etrailer and it probably won't be my last.
# 19
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
The hitch on my Sienna is mounted low and recessed under the bumper so this ball mount has been perfect for the right height and reach for my boat trailer to ride level. etrailer is the only place I found what I needed. Actually I always look there first because they have such a good selection.
The ball mount dimensions and quality were as advertised. Shipping was extremely fast, to Hawai'i! Very satisfied with this purchase.
# 20
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
Wasn't sure if this is going to work on our 2009 Toyota sienna, but it's just right. The 5 1/2 inch height was perfect for a double axle ATV trailer. Item is quality made and etrailer shipped fast!
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
What our customers are saying:
"Thank you! I enjoyed shopping your site."