# 1
Hitch Extender For 2" Trailer Hitch Receiver 7"
Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.
The Brophy hitch extender was well built and delivered the tongue weight I needed to carry my e-bikes. It did accept the Hollywood RV Rider bike rack. It did not however fit appropriately with my Drawtite hitch to allow the use of an anti-rattle bracket. This allowed too much movement of the bike rack.
# 2
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Meaty and does the job. With an additional 1-1/2" drop built into my Demco Commander II tow bar, it's a perfect fit to hitch my 2021 Jeep Wrangler to my 2020 Winnebago View. I haven't tried it yet, but I'm hoping to be able to fit a bike rack between the two vehicles.
I purchased this product to add a platform above my tow bar. I flat tow a Jeep Wrangler unlimited behind a Monaco Windsor Motorhome and have no place to carry a spare tire. I will build a tire rack to fit the top receiver. I trust Roadmaster Products. and etrailer.com's price and service is outstanding. Great job etrailer.com
# 3
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 2" Rise/Drop - 10K GTW, 400 lbs TW
Works well on my 2014 Wrangler Unlimited. Yakima Swing Daddy - 4 bike rack. I am able to open the gate completely until it locks.
I run a motorhome during the summer. I changed towed vehicles from a Truck to a SUV. This Hi/Lo receiver is what I required to ensure a straight tow. I went with the heavier 10K rating. Etrailer may not be the cheapest on the net, however very reliable. The picture shows the finish tow setup. The piece above everything is a motorcycle lift.
# 4
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Functions as designed: The extension allows my bike rack to clear the rear tire on my Jeep. I added a tightening lock to secure it in place and now have no rattle or shake on the rack. Happy Jeep Owner
This item worked great for my bicycle rack that I installed on my jeep. I have a 2" hitch on my bumper. Needed a 1-1/4" adapter hitch, so my bike rack would fit.
# 5
Advantage SportsRack Hitch Extender for 2" Trailer Hitches - 11" Long
This extension works as advertised and allows plenty of clearance from the rear mounted spare tire on my Jeep Wrangler. Please note this product is for use when attaching a bike rack and not for towing trailers and such.
# 6
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
Beefy. I have no doubts of the capacity of either side of this hitch adapter, there's plenty of weld to hold it all together. Very few options will provide minimal drop (for an off-road trailer) and minimal rise on the other side for an additional bike rack or cargo carrier. Jeeps are tough since you need to be able to open the gate. This one clears no problem. My spare is up on a slant back carrier, but I think the stock spare should clear as well. Get you a "Trimax THC200 Universal Anti-Rattle Clamp Fits 2" Hitch" and this thing is solid as stone.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 7
Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
Fast shipping and a good product.
Perfect hitch addition to extend past the big spare tire on my Wrangler XL. Glad I got the anti-vibration version of the hitch extension.
# 8
Draw-Tite Hitch Extender for 2" Hitch Receivers - 18" Long
Perfect for my application. My rack now clears the spare time on my Jeep Wrangler.
I was surprised by just how solid and heavy it was made. Just what I needed to move my Bobcat UTV hitch back to I can use it as my yard dog to shift my trailers around and not worry about the plastic tailgate nor the plastic bed getting damaged. The hitch sits under the bed and this extends it out so it is useable.
# 9
MaxxTow Hitch Extender with Step - 2" Hitches - 13-1/2" Long - 7" x 14" Platform
Works as advertised. I use it full time. I painted the step surface with Herculon bed liner for a rubberized non slip surface, that works even when covered with frost or mud. Only down side, is that it reduces the tongue weight of the truck hitch by 50%. I typically use it to haul a 2 horse trailer. If it ever gets damaged, I will immediately by a replacement.
Affordable front step (wide platform) to service lifted vechicles and will provide distance between exterior mounted spare tire and hitch rack. Suggestion: design the step to fold up or down for a full time install.
# 10
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
Very nice, heavy duty extension.
It works great,by moving the trailer back from the vehicle you can load longer items,so there are not hanging over the back of the trailer. It also helps in the backing of the trailer. Thank You
# 11
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
The hitch arrived as promised and is as described. It's just what we were looking for to adapt our bike carrier for use on our new Jeep Wrangler.
Great product. Meet my needs. I used it on my Wife's Jeep Wrangler to extend her bike rack away from the spare tire
# 12
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
# 13
Curt Extender for 2" Hitch Receivers -18" Long
Received my 18" extender for my 2" receiver in 3 days. It's going to work perfectly, enabling me to haul bikes with the Thule spare me bike rack at the same time as cargo on a luggage rack at the end of the 18" extender on my Jeep Wrangler. Product is super heavy, therefore, super durable.
I got this hitch extender to put on my camper so that I could mount my bike rack. It worked like a charm!! The bike rack and bike were super solid on the trip cross country!!
# 14
Roadmaster Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" Extension
Perfect fit to extend hitch from under spare tire on my Jeep Wrangler.
This tow bar extension is a quality built product.. Very helpful backing a trailer.
# 15
Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches
This is awesome. I am now able to use the back door on my Jeep and still keep my bike on the rack. This is my second item purchased from e-trailer. You need to let the people of Rad electric bike know about your great products. I am posting some pictures on the Facebook page for the other owners. Thanks again
The Yakima swing arm provided just what we needed to allow the use of the Hollywood RV Rider bike rack behind our 2023 Wrangler JL.
# 16
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 48" Long
Definitely a quality product. Just installed and it's very solid. Fits perfectly on the Torque Lift Hitch
Torklift SuperTruss does not disappoint. Straight forward install, though the manual photos are extremely dark. Use the Torklift YouTube install video if needed. The 48” extension gives me the needed length beyond the TC I was looking for while still allowing 1,200 tongue and 12k overall towing capacity.
# 17
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
I need an 8 inch drop between my Itasca motorhome and the Jeep Wrangler I tow behind it. Had a basic Roadmaster drop hitch before I added a bike carrier. Daisy-chained a dual hitch adapter in and was ok going to Florida from New England and back last winter with the two adapters in line together. But heading to Alaska this summer and wasn't comfortable with the extra points of failure. This Roadmaster hitch gives me the drop I need for towing and the second reciever for the bike rack in a single safe package. And kudos to eTraileelr for the very fast shipping. We leave for the great north tomorrow!! .
The Hitch adapter works great. It lined up perfectly with my Jeep Wrangler w/ 4 inch lift. I’ve used it on my Winnebago mainly for long trips and it is a beast! Tows the Jeep easily.
# 18
Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise
Excellent service, good prices and super fast shipping. 2 different orders arrived in 2 days! Thanks for everything eTrailer and William!
Well built product and did what I needed it to do. The rise part of the receiver to install a bicycle rack to keep it above my tow vehicle a lifted Jeep Wrangler. The only negative is the receiver tube on the bottom now drops the hitch basically 2 1/2 inches lower and I now drag the receiver on the ground on driveway / street dips. Would have been better if none rise came straight out. I don’t think I would drag then I should have done more measurements
# 19
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 36" Long
I think it is a great product but expensive. In retrospect I could not do what I wanted with the truck and hitch so I spent the money needlessly. Not any fault of your company. I would have been just as well to leave the stock OEM and not spent the money anyway. Live and learn.
The larger of two packages arrived with the actual smaller Torqlift box inside. All expected parts were delivered. The upper tube fit fine. The lower tube was very tight. I first removed some of the paint near the end of the tub with little success. I have the 20k Original Torqlift hitch. I decided to file the inside of the lower receiver and this smoothed out the problem. Then I found that the two stabilizing chains were four links two long for my application. I cut them shorter and PERFECTION! I provided the detail as realistic, but minor issues happened. As shown in the photo, the 36" extension looks very solid and I'm perfectly satisfied.
# 20
Curt Vertical Receiver Adapter - 2" to 2", 4-1/4" Long, 2-7/16" Drop
The hitch adapter and 90 degree mount solved my desire to mount my electric wench on my auto trailer replacing the manual wench. See photo. The 2" sleeve would not come out of the existing 2" receiver so I used the hitch adapter to make the transition. The etrailer experts correctly told me there would be some play in this joint. However, it works here (as this is not for towing). I also used the 90 degree mount upside down (also not an approved application). But again no towing is involved. I did need to drill a new hole in the receiver.
Excellent quality product! I will be using it for towing my boat in the spring with a factory hitch on a 2016 Chrysler 300 S. Nice set-up. I'll pull one pin for the off season and looks like a no-hitch appearance. Love the idea! Excellent service and very fast delivery. This is my second purchase over the years from etrailer and couldn't be more satisfied! Thank you!
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"