# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
All went well with the order and installation. Wiring kit did not have enough cable ties. I needed an extra 15 to make it right. How to videos were very informative.
Simple. It works for a great price and it looks great too.
# 2
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 3
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
I am very satisfied with E trailer, I ordered 2 different trailer hitches and they both fit very well. One for a ford ranger and one for a Kia Sorento. The service was very good and the shipping was very quick. I would not go any where else for my trailer parts and accessories. Thank you E trailer and a Merry Christmas to all.
All went well with the order and installation. Wiring kit did not have enough cable ties. I needed an extra 15 to make it right. How to videos were very informative.
# 4
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
Came quickly, website was easy. Good product. Lost the pin to hold it in during a trip and still came thru. It jammed into my receiver and didn't come loose until I took the trailer off.
I would give five stars but due to what looks like packaging problems the hitch came very marred and the coating chipping off.
# 5
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Sturdy construction. Better quality than what I expected.
Items packed well delivered on time. Doesn't get much better that that.
# 6
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Very solid. I like the cushion feature to prevent damage to my vehicle.
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
# 7
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 8
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
I just purchased a new hideaway hitch system. But the hitch sits only 15 inches off the ground at best. And, my trailer coupling is 22-23 inches off ground. So l needed 7-8 inches of rise on the new 1.25 inch receiver system. Internet research took me to etrailer and the Brophy hitch. I got 5.5 inches with the Brophy hitch, the highest available for a 1.25 inch receiver I could find. The others are limited to 5 inches max. I added another 1.5 inches with your Curt shock absorbing hitch. Voila, with a combined 7 inches of rise and on level ground the trailer now rides perfectly level!!!! Both parts were very easy to connect. Delivery was speedy. Thank you for saving the day and my investment in an expensive new hideaway hitch!
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
# 9
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Came quickly, website was easy. Good product. Lost the pin to hold it in during a trip and still came thru. It jammed into my receiver and didn't come loose until I took the trailer off.
I am an infrequent trailer user, but getting my daughter home from college was necessary in March. This drawbar fits my hitch and utility trailer well, did exactly what it is supposed to do, and was the last thing to be concerned about right then. I have a '11 Mini Countryman S with a Class II receiver from Mini Fini, (which cost twice as much as a Curt) where the hole is flush with the fake grille near the bottom of the bumper cover, so I needed the long bar to reach out past the bumper. The Curt receiver for that car hangs visible underneath the bumper (ugly), which also increases the lever arm on the receiver beam and would have needed an even taller rise. (Curt take note!) All just part of the kit to create an occasional 1 ton pickup out of my Mini, leaving the "bed" at home most of the time.
# 10
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Very solid. I like the cushion feature to prevent damage to my vehicle.
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
# 11
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Quick delivery and products in perfect shape. Multiple different items included in box. Packed well. A small thing but gave the impression that etrailer does things right. Very happy.
Everything came quick. The online video and paper instructions were spot on and made the whole process very simple.
# 12
Draw-Tite Ball Mount - 6-3/4" Rise, 8" Drop - 10" Long - 5,000 lbs
Rather simple product but appears to be built well. Worked great for raising the height of my ball mount because the Kia Sorento sits to low to utilize a straight shank. The people at etrailer were also great!!!
I am very satisfied with E trailer, I ordered 2 different trailer hitches and they both fit very well. One for a ford ranger and one for a Kia Sorento. The service was very good and the shipping was very quick. I would not go any where else for my trailer parts and accessories. Thank you E trailer and a Merry Christmas to all.
# 13
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Sturdy construction. Better quality than what I expected.
works well brings the trailer tongue up to level. I have it on an EV so the raddle is annoying, because I just keep on forgetting to buy a anti rattler.
# 14
Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
It took a while before my son had time to install the trailer package. Took some watching of [online] videos but he got it installed and it works great. We’ve used it a couple of times to pull a small trailer.
I reviewed the product installation video after which I felt very confident in being able to install the hitch and receiver myself. The receiver is now installed and looks really good. I also really like this site with all their installation materials and valuable reviews.
# 15
Convert-A-Ball Ball Mount for 2" Hitches - 6-3/4" Rise, 8" Drop - 10,000 lbs
Very solid. I like the cushion feature to prevent damage to my vehicle.
I use this hitch when I pull my horse trailer to make the stop/start transitions as smooth as possible for the horses in the back. It works great. I also love that its a category IV hitch. Really heavy duty. My truck sits pretty high, and the amount of drop - 8" is perfect. I never worry about hitch failure travelling with my horses - they're a heavy load, and any failure would be a disaster. E Trailer provided excellent service, and their shipping to Canada was prompt and hassle free. Way to go guys, keep up the great work!
# 16
Brophy Ball Mount - 5" Rise, 6" Drop - 16" Long - Aluminum - 8,000 lbs
Perfect ball mount for my 2019 Kia Sorento which has a low hitch, so finding a good 7" rise was essential. Nice lightweight, well made ball mount. On top of that great customer service, followed my order and made sure I received this in time for our next camping trip!
Works great looks even better !
# 17
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
It took a while before my son had time to install the trailer package. Took some watching of [online] videos but he got it installed and it works great. We’ve used it a couple of times to pull a small trailer.
I reviewed the product installation video after which I felt very confident in being able to install the hitch and receiver myself. The receiver is now installed and looks really good. I also really like this site with all their installation materials and valuable reviews.
# 18
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Came quickly, website was easy. Good product. Lost the pin to hold it in during a trip and still came thru. It jammed into my receiver and didn't come loose until I took the trailer off.
This draw bar in perfect for my John Deere X738 tractor. What I like about it is the ¾” rise it keep the draw bar height at about the same as the factory frame so the attachments height remain level. Thanks for the great product.
What our customers are saying:
"Great company to do business with... Great communication... Very fast delivery... Would buy from again…"