Best 1993 Subaru Impreza Hitch Adapters

I can't believe how much this thing wobbles inside of my hitch, and how much my accessory wobbles inside of it. Two wobbles don't cancel it and I get wobble-wobble. I have yet to use my accessory because that just won't work out. I'm trying to use the Rhino T-Loader so that I can load a kayak on my roof. Paint also chipped off so easily from playing around with installation; I didn't even USE the accessory yet. For the cost of this chunk of metal, I'd have hoped for better fitment. Most anti-rattle devices only work for securing the accessory-to-hitch end. I'm not quite sure if I can stabilize both ends...

It doesn't go all the way into the Volvo xc 60 2020 recharge hitch so the pin can't fit in the hole.

I bought this adapter so that I could mount a bike rack on the back of my 2012 Honda Civic. The adapter got the bikes high enough so that they wouldn't hit the pavement when backing out of my driveway and transitioning to the street. The product is definitely strong and well made. It was put to the test with a very heavy steel thule bike rack that was definitely heavier than all 4 of the bikes that were mounted on it. The fit was precise so it didn't hit my rear bumper as well.

Allowed me to add a folding platform for a wheelchair to the bar of my car without changing my hitch. Just what I needed.

The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.

This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.

Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.

Easy company to order trailer hitch parts from. Quality and precise fit as advertised in their easy to use online shopping guide.

I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.

I use the extender on my bike rack so I can access my tailgate and truck bed with the rack on. It does what it supposed to do and looks barely used although I travel to trails twice a week.

Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.

Was looking for a way to carry 2 e-bikes on a Hollywood rack, and tow my Jeep, behind my Class A RV. This dual hitch looks like it will do exactly what I want, at least when doing my test set-up. Only reason I didn’t give it a 5star is because when the rack and Blue Ox tow bar were installed, there was significant “slop”. I resolved this problem by buying an adapter at the local hardware store, and it is now tight as it should be.

Exactly what I needed. Now able to add storage box and still pull tow Dolly.

We were looking for a solution to haul our utv when pulling our camper. This extender allowed us to leave the tailgate down and still have enough clearance to not damage the tailgate. Downside--this extender amplifies the amount of movement with the hitch. This is more than a simple hitch clamp could fix. I added several modifications to completely eliminate the hitch movement. We have taken several trips since the installation and no issues with pulling the trailer. We did have to extend the safety chains about 4 links. Overall a good product and it accomplished the goal. As always,etrailer personnel are knowledgeable, easy to deal with and have quick shipments.

Works as it should and I didn't have to turn my power jack on my camper 90 degrees to miss the tailgate when it is lowered!!

Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.

I personally couldn't use it. But I know metal industry very well and this will work perfectly in its environment. It was just not needed and I never put it on.

This was exactly what I needed to make my hitch work on a Grand Caravan. The adjustable hitch was too close to the bumper after installing the Curt receiver hitch.

This extender fit the bill. It is extremely sturdy and comes with a hitch pin. Totally recommend.

Ordered exactly what I needed to lift my tow bar !!! Love that etrailer carries roadmaster products

I’m very satisfied with this product. It looks well built and it’s rated. I looked other places and found many that was not rated or didn’t say if it was. I’m pulling a Jeep Rubicon and didn’t want to skimp on such an important part of towing

etrailer's Customer Service, Delivery, and Quality Products are Great! Every question and concern I had was promptly replied to and was rectified

Great product. Correct fit. Arrived fast and it is exactly what we were looking for. Thank you.

Perfect solution to adapting my hitch to my bike rack. The people at U Hall were very helpful.

eTrailer has a great selection of products and excellent customer service. When my order got lost in transit, Brandy did a great job looking into my case, helping me reorder over the phone and keep in touch with me via email.

This hitch extension was exactly what I needed. New hitch on the Toyota Avalon has the receiver box a little too far under the bumper to fit my bike carrier. The diagonal support on the carrier didn't allow hitch pins to align without modifying (cutting) bumper. This extension was a simple yet effective solution to moving the carrier away from rear of vehicle. (Photos were taken without hitch pin in place) The item was in stock and shipped rapidly. Thank you etrailer.

Perfect fit to extend the hitch to allow my bike rack to clear the back bumper. Great quality as well.

I was looking for something like this for my 1 1/4 Reciever. My biggest concern was your 2 inch Adapter would hit the Car's rear Rubber Bumper....it cleared by 1/4 inch on my 2016 Ford Focus, so I'm happy. I think I purchased the Trailer Hitch from your company, and use it for a Bicycle Rack. With this Adapter, I can look into other Hitch Accessories.

Would have been nicer if a hitch pin was included.

This is a very high quailty-made item. Very well packaged also. It would have 5 stars but no matter how I try. I cannot remove the sloppy fitting with the adjustment screw. I have a standard 2 inch receiver. On all the advertisement videos, it looks easy and the adjustment screw turns easily. Mine sounds like a squealing pig when I turn it. I even looked through the other end and can see it’s greased.

Love the rack and the folks at e-trailer got it to me remarkably fast. Everything looked great set up for the most part. The directions were very clear and it required minimal effort.

I recommend etrailer. Customer service helped me get the bike rack and swing away to fit my needs. The Pivot 2 works wonderfully when it’s not broken. First the release latch stopped working within a month-Kuat customer service replaced it. Then there was a 1.5”split in the steel where the bike rack slides in, (it could have been a very tragic outcome had I not removed my bike rack when I did).Kuat customer service would not give me a refund but they did replace it with another one. Here’s hoping third one is the charm. Note: I went directly through Kuat when I had a problem not etrailer. I didn’t give etrailer the opportunity to make it right because I was traveling and felt as though the manufacturer would get me faster results. I’m not sure if that was the best decision.

Excellent product, solidly built and easy to install. I was hesitant because of the full size spare tire on the back ladder. The videos and the specifications (especially the sizing details) gave me all the info I needed to make the decision to install it on my Sprinter. The swing away rack gives me full access to the rear of the vehicle. I wish I had bought it sooner.

Love it! It swings out of the way so I can get the back door open. The other advantage is it allows the back door to be open a few inches at night (when the hitch is in the locked position) for airflow when it’s hot.

Already have a Sris bike rack, has been an excellent rack and well be compatible with this hitch, both very well built

The Yakima swing arm provided just what we needed to allow the use of the Hollywood RV Rider bike rack behind our 2023 Wrangler JL.

Works great for two door Jeep Rubicon. We no longer have to remove our bike rack to gain access to the back of Jeep.

This is sobeasy to install! It only took me 20 minutes. This definitely gives me much needed storage space for my 2023 Thor Scope 18M

After you learn how to use it it works great