2021 Winnebago Revel Motorhome Brake Controller

Features:

The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

You need item ETBC7L ($95.21) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

You need item ETBC7L ($95.21) to install your controller.

Features:

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

Get a brake controller in your truck that looks like it's supposed to be there. This sleek knob blends right into your dash and makes your settings simple and convenient to adjust.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. Its unique off-roading mode helps you handle rough conditions, so get out there and get towing.

Installation Notes:

Features:

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

The Tekonsha P3 is a brake controller beloved for its reliability and useability. You're able to save your settings and multiple profiles. It's easy to install, and with the custom harness, it's plug-and-play.

Installation Notes:

Features:

Get a brake controller in your truck that looks like it's supposed to be there. This sleek knob blends right into your dash and makes your settings simple and convenient to adjust.

Installation Notes:

Features:

The Tekonsha P2 is a classic brake controller you know you can rely on. It's easy to install, and with the custom harness, it's plug-and-play.

Installation Notes:

Features:

This brake controller likes to keep things simple, with a thumbwheel on the front to adjust the output settings and a lever on the side for the sensitivity. The digital display is large and simple so you can read it with just a glance.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.

Installation Notes:

Features:

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range.

Installation Notes:

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

Features:

Mount the control knob of this proportional brake controller on your dash for a from-the-factory look, and install the main unit out of sight behind the dash in any position or angle. Adhesive backing gives you the option of a drill-free install.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

Adjust power output and braking aggressiveness with easily accessible, up-front buttons on this time-delayed brake controller. Digital display and rotary-style manual override included. Activates brakes with a preset intensity.

Installation Notes:

Features:

Adjust power output and braking aggressiveness with easily accessible, up-front buttons on this time-delayed brake controller. Digital display and rotary-style manual override included. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.