2001 Four Winds Dutchmen Express Motorhome Brake Controller

Features:

...output, brake type, and display and language preferences Customizable, easy-to-read LCD display gives you braking status at a glance Color and contrast can be personalized to give you the right setting to...

Installation Notes:

Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.

If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Features:

...output, brake type, and display and language preferences Customizable, easy-to-read LCD display gives you braking status at a glance Color and contrast can be personalized to give you the right setting to...

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

...brakes Overall dimensions: 5" long x 3-1/2" wide x 1-3/8" tall LCD display dimensions: 1-3/16" wide x 9/16" tall Mounting range: 360 degrees vertically Warranty: Limited lifetime...

Installation Notes:

You will also need item 37185 ($59.13) to complete your wiring.

The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.

Features:

...brakes Overall dimensions: 5" long x 3-1/2" wide x 1-3/8" tall LCD display dimensions: 1-3/16" wide x 9/16" tall Mounting range: 360 degrees vertically Warranty: Limited lifetime...

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

...going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with...

Installation Notes:

You will also need item 37185 ($59.13) to complete your wiring.

The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.

Features:

...going downhill and decreases when going uphill Shows you braking and sensitivity settings and error codes on a simple LED display Uses rocker switches to set settings Activates manual override with...

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

...sync your trailer's braking to it Activates faster than accelerometer-based brake controllers Handheld remote with color LCD gives you convenient control and extensive diagnostic information that's...

Installation Notes:

Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.

If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Features:

...sync your trailer's braking to it Activates faster than accelerometer-based brake controllers Handheld remote with color LCD gives you convenient control and extensive diagnostic information that's...

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

...pinch-trigger manual override Easy to reach without taking your eyes off the road LED display is bright, large, and adjustable Displays error messages so you can troubleshoot Shows settings using numbers and...

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.

Features:

...pinch-trigger manual override Easy to reach without taking your eyes off the road LED display is bright, large, and adjustable Displays error messages so you can troubleshoot Shows settings using numbers and...

Installation Notes:

You will also need item 37185 ($59.13) to complete your wiring.

The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.

Features:

...the road LED display is simple Shows settings as spectrum of bars Displays error messages so you can troubleshoot Adjusts brightness for best visibility Auto-sleep mode prevents draining the battery...

Installation Notes:

You will also need item 37185 ($59.13) to complete your wiring.

The brake (blue) wire will need to be run from the brake controller back to the plug in the rear. The brake controller power and brake pedal wires are already run. A 12 volt hot lead from the battery may also need to be installed.

Features:

...the road LED display is simple Shows settings as spectrum of bars Displays error messages so you can troubleshoot Adjusts brightness for best visibility Auto-sleep mode prevents draining the battery...

Installation Notes:

The brake controller can easily be installed with the included vehicle specific wiring adapter; no other parts are necessary.