We can piece together a Malone Lowbed trailer by first starting with the part # MPG464-LB and then a single bunk kit part # MPG561 and then the spare kit part # MPG465 and you'd be set. There isn't a kit with just the parts you are looking for available at this time. view full answer...
The Thule OutWay - 2 Bike Carrier # TH45JV comes with two keys for the integrated locks. I went ahead and attached a screenshot from the instruction manual that shows all the components.
The reason why the Thule One-Key System Lock Cylinders # TH450400 appear as an additional accessory is because other Thule accessories (crossbars, towers, roof racks, snow equipment racks, cargo boxes) have the option for using the cylinders as extra security measures. view full answer...
The EcoHitch # EH34FR doesn't provide an integral bracket for installing a 7-way trailer connector. We offer bracket mounts that usually work pretty well, which will use a pipe clamp to attach to the hitch crossbar, but because the crossbar will be buried behind the bumper cover once the installation is complete, that wouldn't be a good option in this case.
The Curt # C58000 Easy Mount bracket would be your best bet. view full answer...
The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red).
The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs... view full answer...
The # ETBC7 or # ETBC7L will differ from the Curt # C57672 in that these two parts both come with all of the wiring, breakers, mounting bracket and connectors needed to complete the job; the Curt # C57672 is just the 7 way connector without any of the wiring, breakers or the mounting bracket. Other that than, both connectors are the same. view full answer...
The Curt Roof Mounted Cargo Basket # C18115 has u-bolt hardware that is 6mm by 1 inch threading according to my contact at Curt Tech. view full answer...
Tire and wheel combos we carry, like the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel # AM30070 you're asking about, don't come balanced since trailer tires don't need to be balanced.
If you'd like for them to be balanced you can either use the Counteract Tire Balancing Beads for Tandem Axle Trailers # CA68VR or you can have a shop balance the tires for you. view full answer...
The Replacement 3-Wing Hand Knob # 753-0745 that you referenced is sold individually. The one customer who had a bag of these delivered had ordered several of them. view full answer...
The Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Wheel # AM32161 is not machine balanced - nor are any trailer tire and wheel combos.
That said, it will be ready to install when you receive it. What happens is the manufacturers line up the light spot on the tire with the heavy spot on the wheel, which is a type of balancing, although it is not the same as what happens with the tire on a passenger car.
While you can have the Karrier # AM32161 professionally balanced if you like,... view full answer...
The HandRoll Carrier # Y04082 that you referenced is actually just the part of the carrier that has the wheels. To complete the carrier you also need some saddles like the DeckHand # Y04083. This combination is available for your 2019 Subaru Outback Wagon in the kit # Y04083-04082 and is compatible with round, square, or aero-style crossbars.
To add locks to either setup you need the 4 lock core set # Y07204. view full answer...
Curt Trailer hitch # C12038 does not include lock washers. So it wasn't that you didn't get them it is that the hitch doesn't come with them. Using Loctite would be a great idea. Blue Loctite is should be all you need, # LT37614. Because the red Loctite is pretty much permanent. So should the hitch need to be removed for any reason, it would take pneumatic tools if you used red Loctite.
Also, make sure the bolts are torqued to the specifications in the instructions. If they are too loose... view full answer...
The Yakima SkyBox cargo boxes, like the NX 18 Rooftop Cargo Box # Y45AV, will come with grease in the lock core housing according to my contact at Yakima.
She also did point out that the dry graphite lubricant is good to use on the external part of the lock core as well since it doesn't attract dust and dirt. view full answer...
The Draw-Tite Class I Trailer Hitch, # DT24959, does not come with a ball mount. You will need to order one. To add a hitch ball, you will first want to determine the size of hitch ball that your trailer requires. You can use a 1-7/8 inch hitch ball, # 19256, or a 2 inch hitch ball, # 19258.
Please note, this hitch will fit your 2008 Subaru Impreza as long as it is the hatchback model with single exhaust. This hitch will not fit the WRX STi models.
If your Impreza is a sedan, not STi... view full answer...
Yep, it sure does; a stop collar to automatically align the hitch pin holes is indeed included with the 24x60 etrailer Cargo Carrier for 2" Hitches # e98874.
I have added a cut out below from the product page of the # e98874 which shows this. view full answer...
To see a picture of what the red S clips that the installation instructions are referring to check out the picture I attached. If all you have is about 1 inch of extra cable you would be fine not using one of the clips to secure it away.
The purpose of the clip would be to secure extra cable back to the chain so that the excess wouldn't hit anything. But with only an inch of excess cable you would be just fine. view full answer...
The size bolt lead that comes with the Draw Tite hitch part # 76271 is 7/16 inch so the correct part number you'd need for more would be the # C58410. view full answer...
Trailer hitch # 76227 does not come with hardware because it uses nuts already on the 2017 Subaru Outback Wagon. The bumper beam on this vehicle fits over 8 studs in the vehicle frame and is held there with 8 matching nuts. This hitch will be sandwiched between the bumper beam and the end plate where it mounts using the same studs and nuts. I have linked the instructions for you to illustrate this.
The review you mentioned is actually referring to EcoHitch # 306-X7601 which comes with... view full answer...
Thanks so much for the photos! From the part number on the converter box, you have the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 (for non-hybrid 2020 Subaru Crosstreks). From your photos and the product photos we have, you do have all of the components of the connector. With the # 118467, this harness does not include any additional like fuses/relays/etc.
If you are having trouble installing the 4-way, feel free to respond to this answer with the issues... view full answer...
The Yakima RidgeBack bike carrier # Y02457 has a lock built into the anti-rattle knob. When the knob is tightened and then locked it cannot be take out of the hitch. I have included a link to a video review of this carrier for you. view full answer...
Go To Results