Hi Doug; the Curt Trailer Hitch Receiver # C45RJ is a pre-order item. Since it hasn't been fully developed we don't have any information on fitment restrictions yet. Once Curt finishes the hitch we will be able to answer that question. As of right now, they're the only company we know of developing a hitch for the 2025 Mustang.
If you have a more immediate need for a hitch I recommend taking the # E-911 to a local fabricator to see if they can fashion a custom hitch for your Mustang GT. view full answer...
For your 2018 Ford Mustang Curt does list the part # C11405 as a fit for the GT models. We had a customer come back though and tell us they had to move back the clips of the sensor to attach it back to the frame. view full answer...
Hello Denis, thanks for reaching out. The correct trailer hitch for the 2025 Ford Mustang Ecoboost is the Curt Class 1 Hitch # C45RJ. This is a new hitch so it is still in production at the moment and the ETA is currently set for September 2025. It is available for pro-order at this time. Typically the dates for these pre-order hitches are pretty accurate, but with it being only May, there is a chance it gets pushed back a few weeks. The date is always subject to change up until they are... view full answer...
There is a potential way for you to haul an electric wheelchair with a 2017 Ford Mustang, although there is not an adapter that is going to work. The reason for that is there is just one 1-1/4 inch to 2 inch adapter with rise that works with a Class I hitch, and that adapter, the Brophy # HT5R, has a 5 inch rise, which doesn't meet your needs. Additionally, the use of any adapter will reduce the weight capacity of your hitch by 50 percent, and since there are only Class I hitches with a... view full answer...
The Superchips Flashpaq F5 Performance Tuner part # SU2845 will work with many different vehicles which I have attached a list of for you below. That said, in order to transfer the device from one vehicle to another you must first restore the original vehicle to the factory settings or else it will not work on any other vehicle.
2008 - 2009 Chevrolet HHR 2.0L I4 Engine
2008 - 2009 Chevrolet Cobalt 2.0L I4 Engine - Turbocharged
2006 - 2006 GMC Sierra 4.3L V6 Engine
2016 - 2018 GMC Sierra... view full answer...
Hey Eve, we have the Curt hitch part # C11405 that does fit your 2021 Ford Mustang California Special. Are you also looking for a bike rack or do you have that already? view full answer...
Hey Darin, thanks for reaching out!
The mounting holes for the Derale 17" Fan Clutch Fan # D17117 are spaced out 3" and 3-1/4" apart on center (see attached photo and video). view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76015 has a width in between the upright braces of 44-1/4 inches. The lower holes are 4-1/2 inches on center and 6 inches from the top of the crossbar to the bottom of the hole. The plate on top of the bar will subtract 1/4 inch from that measurement. I've attached a photo to assist. view full answer...
Hey John, thanks for reaching out!
When you say the pins on the Curt 4-Way Flat Trailer Connector # C56496 are solid, do you mean they light up the light on your tester except the ground? The ground pin won't show power, but could pose an issue if you're testing for continuity and not getting a great reading.
If you can give me a little more insight I'd be more than happy to help you continue to troubleshoot! view full answer...
The weight capacities of trailer hitches, like the Curt # C11041 for your 1999 ford Mustang, cannot be enhanced. Trailer hitches are tested extensively by the manufacturer, and these are the weight limits that they deem are safe. Adding some extra welding or material would change the weight ratings but there really is no way to tell if it would add or take away from weight capacities or not.
If you let me know what you will be using it for, I can make additional recommendations if necessary. view full answer...
Performance-wise the Prodigy RF part # TK94FR and the Curt Echo part # C51180 are right on par with each other. They are both proportional controllers which means they will sense the amount of braking applied and apply the trailer brakes in an equal amount. The big differences are that the Echo does not permanently install on the trailer like the RF does. It basically just plugs into the 7-way. So an easier install...with the added risk of being easily stolen possible (we've not seen this... view full answer...
As long as the seal in the bearing kit part # BK1-150 is flush with the hub it is okay to have a small gap between the seal and inner bearing. When installing the seal you only insert it enough so that it is flush with the hub.
The seal's job is to keep the grease inside of the hub. As long as the inner bearing is seated against the grease seal shoulder on the spindle then you should not have an issue. I have attached a video of a hub installation for your reference. view full answer...
For your 2008 Ford Mustang GT the Curt hitch part # C11312 is a fit for the standard V6 GT models. The only ones it can't fit are the specialty GT models like the GT/CS "California Special", Shelby GT, and GT500. view full answer...
For your 2010 Ford Mustang, I recommend using the Curt Trailer Hitch Receiver part # C11048 which is a Class I hitch with a 1-1/4" receiver tube opening. As long as you do not have the GT/CS, California Special, Shelby GT, or GT500 edition then this hitch will work well for you. It is currently the only option we have for this vehicle. In order to maintain the lifetime warranty, you will need to use part # 18050 for all non-towing applications like a bike rack.
Then for a bike rack, I... view full answer...
The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise # RM-077-8 has a towing capacity of 10,000 lbs but the tongue weight is limited to 400 lbs. As long as the tongue weight of your loaded tow dolly and whatever accessory you put in the top receiver is under the 400 lbs then you'll be just fine. view full answer...
I did some checking and your 1998 Ford Mustang with a manual transmission is flat towable as-is without any modifications. We have the parts you'd need to install to accomplish this as well with the Roadmaster base plate kit part # 466-1 which is custom fit for your Mustang and provides the attachment point for a tow bar to connect to.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The... view full answer...
When it comes to a trailer hitch receiver for your 2014 Ford Mustang, I recommend the Draw-Tite Class I Sportframe, # 24863. This custom fit hitch features bolt-on installation with no drilling or welding required.
The only hitch option for the 2014 Mustang Coupe is a Class I. Due to the low tongue weight capacity of the Class I hitch, both the bike rack and the hitch manufacturers both agree that no more than two bikes should be carried on a Class I hitch. Adding additional bikes would... view full answer...
Hey Therese, yes, we do deliver to Canada and we also have a hitch and wiring for your 2016 Ford Mustang (cool car by the way). For your car we only have one hitch, the Draw-Tite Class 1 Trailer Hitch # 24928. This hitch will work with the convertible models as well as the Fastback models: Shelby, Mach-1, and Active Exhaust models.
For wiring, I suggest going with the Curt T-Connector # C56088 which is a plug in harness, making install super easy. For pricing and everything else you'd... view full answer...
To be able to use the Curt Cargo Carrier, part # C18151 on your 2015 Mustang you will need an adapter because the only trailer hitches available for your vehicle is a Class l trailer hitch with a 1-1/4 inch receiver opening.
You would need an adapter like part # HTAD to be able to carry the 2-inch cargo carrier.
Keep in mind that using any adapter in the hitch reduces the weight capacity of the hitch by 50 percent. The # C18151 basket weight is about 55-lbs. So this would not leave... view full answer...
Hey Keith, thanks for reaching out!
According to the online owner's manual for your 2021 Ford Mustang you can tow up to a 1,000 lb trailer, which I recommend verifying in your copy of the manual.
With that being the case, here are the parts I recommend for your setup:
- Draw-Tite Sportframe Trailer Hitch Receiver # 24928
- T-One Vehicle Wiring Harness # 118487
- Mounting Brackets # 18136 and # 18144
- Ball Mount Parts # C45025 and # 19258
- Yakima EasyRider Double Decker Trailer... view full answer...
Go To Results