1995 Chevrolet LLV Air Filter

Hi Jeff, The K-Source Snap & Zap Custom Towing Mirrors part #KS69NQ will work with your Lariat mirrors while allowing you to retain the use of the camera and side lights! These mirrors are specifically designed to match the contours of the side…

Unfortunately you can not Doug. The factory hitch on your 2020 Ford F-150 Lariat is part of the rear step-bumper assembly. It's bolted to your frame and then the step-bumper bolts to the trailer hitch. Removing the factory hitch removes the…

Hey Steven, thanks for reaching out. Yep, we sure do. For your 2026 Subaru Crosstrek Wilderness I recommend the following Curt hitch: - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C54GJ This hitch is designed specifically for the…

Hello David, Thanks so much for reaching out! For your 2026 Ford F-350 diesel dually, you will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH54QR. This is the only front mount option we offer that is confirmed…

Hello Dennis, That is definitely something you will want to check with your setup. The B&W Continuum #BW78FR will sit about 9 inches below your trailer frame once installed, so you will want to measure from the ground to the bottom of the frame…

Hey David, this is a really good question. Basically we have installed the hitch part #e98912 on a 2024 Subaru Crosstrek like you saw in the install video but the fitguide team were instructed to remove it as a fit for the 24 models. If you like this…

Hey James, thanks for reaching out. For the Benton LittleShift Bike Rack #B54VR the pin should be inserted until the "shoulder" of the bolt is flush up against the side of the hitch. I've included a few pictures to help illustrate. If…

Thanks for reaching out, WC. We do have grille guards that fit your truck, like the Aries #AA22PQ, but at this time there isn’t an option that’s guaranteed not to interfere with the front sensors or camera. Most full grille guards sit in a position…

Hey George! For a hitch I recommend the Curt Trailer Hitch Receiver #C11465. This is a Class I hitch with a 1-1/4" receiver and a bolt on installation. It has a max tongue weight of 200 lbs to handle your e-bike and rack, and comes with a…

If your 2013 Chevrolet Express 2500 passenger van did not leave the factory with a factory tow package it will not have everything needed to connect a 7-Way #A10-7072VP. With you mentioning the connector only having 6 connector this tells me it is…

Hi Michael! The Dylux Dual Propane Tank Holder Mounting Kit for 20-lb Tanks #DY34FR can definitely be installed on the tongue of a trailer. It doesn't include any kind of brackets for doing that, but the 3/8? slotted holes makes it fairly…

I have linked the installation instructions for Draw-Tite Class III hitch #75270 that fits your 2011 Honda Odyssey and the hardware torque specs, as well as a listing of the required tools, is included for your reference. Among other basic tools…