Opti-Brite LED Work Light - Heated Lens - Flood Beam - 2,800 Lumens - Square - Qty 1

Video Transcript for Review of Optronics Work Lights - Opti Brite LED Work Light - OPT26NR

Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this Opti-Brite LED work light. Now, this square work light is going to provide a bright white light for industrial, agricultural, and recreational applications. And obviously, I have this connected to my 12-volt power source and you can see just how bright this is with my studio lights on. But let me go ahead and turn those studio lights off to give you a better demonstration. Now, one of the features of this light is, it has a heated lens and so that's going to ensure consistent illumination in cold or damp conditions.

That's gonna prevent snow and ice spilled up from obscuring the light and enhancing visibility and safety for our workers when clear light is crucial. And that's also gonna help extend the lifespan of the light by preventing damage caused by moisture accumulation. And the LEDs are gonna give you long lasting energy-efficient illumination. You can see I do have this shining on the wall behind me. I just kind of wanted to show you that flood beam pattern.

The effect of lumen output on this is gonna be 2,800 lumens and the raw lumen output is 4,500 lumens. There's a five diodes here and the contoured lens is going to allow for that wide angle flood beam. And that flood beam is going to obviously light up a wide 140 degree area. So let me go ahead and turn my studio lights back on and then I'm gonna go ahead and disconnect this from power so I'm not continuing to blind you and I'm gonna give you a closer look here. So the contour lens, as I mentioned, is what's gonna give you that wide angle flood beam and the lens and the housing are durable, they're water-resistant.

This black powder-coated aluminum or die-cast aluminum housing is gonna be durable and rust-proof. And the tough polycarbonate lens is impact-resistant. This is IP69K rated, so this is gonna stand up to severe environmental conditions and even cleaning methods. And this is going to be a durable surface mount technology construction of the LED circuit board. So that's gonna withstand shock and vibration, it's gonna allow for improved heat distribution.

As you can see, speaking of heat distribution, we have these fins here on the back that's gonna do a great job of radiating that heat. So it's a very durable, very rugged light. Let me go ahead and put a ruler up to it, see if I can give you some measurements. So looking at the overall width, we are sitting right at about almost five inches, end to end, about 4 15/16 inches wide. The overall height of the light, hopefully you can see that there, about 4.5 inches. And then the depth might be kind of tricky there about 2.5 inches. And then with the bracket here, the overall height is gonna bring it pretty close to about 6.5 tall using that bracket. So this is going to be a pretty easy installation. It's gonna be a single bolt pedestal-style bracket. The hardware is included and then it's gonna be adjustable obviously. So you're gonna be able to get that angle that you want, and it's gonna wire into your 12-volt DC and 24-volt DC system. So it's gonna be a simple hard wire installation. But again, a very durable light. I think it's gonna be long lasting. You're not gonna have to worry about ice or moisture accumulating on this because of that heated lens. And if you have any other further questions, don't hesitate to give us a call. We'd love to help you out further. If you do pick this up, we'd love to hear your experience with getting this installed and using it. You can share your experience with us by dropping a comment or leaving a review on this product page. Well, that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.