See what our Experts say about this Deka Wiring

• How to Install Stay-IN-Play Indicator Light on Motorhome for Flat Towing
  There are a few different ways to get the indicator light from the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 operating in your motorhome. If you don't plan on using the brake controller circuit on your motorhome then you can connect the indicator to your motorhome by using that circuit. Tap in a wire from the stop light circuit on your towed vehicle to the connector at the front of your towed, making sure it corresponds to the brake controller pin on your motorhome...
  view full answer...
• Is There a Class II Trailer Hitch Receiver Available for a 2008 Chrysler Sebring Convertible
  The only trailer hitch receiver option for your 2008 Chrysler Sebring Convertible is the Draw-Tite Sportframe # 24871, which is only a Class I hitch. Due to the design of your Sebring, there are no Class II options available. This trailer hitch has a Gross Trailer Weight (GTW) of 2,000 lbs and a Tongue Weight (TW) of 200 lbs. I checked an online version of a manual for you Sebring and if had the same weight capacities that this hitch has, but you will want to check your copy of the owner's...
  view full answer...
• How To Attach Reverse Light Wiring For Putco Universal LED Tailgate Light Bar On 2017 Toyota Tundra
  The Putco Blade Universal LED Tailgate Light Bar # P92009-60 does plug into your 4-way trailer connector on your 2017 Tundra. That will take care of the stop, tail, and turn signals for the light bar. To get the backup lights working you will need to attach the White wire to the reverse light circuit on your Tundra. You can use the quick-disconnects like part # DW01899-1 and part # DW01896-1 for the reverse light wire. For 16 gauge wire you can use part # DW02359-1. This is sold by the foot.
  view full answer...
• Where Can I Purchase Replacement Spade Terminals
  We do sell a 14-16 gauge replacement for the female and male spade terminal. The part numbers are; Female Spade Terminal Quick-Disconnect - 16-14 Gauge - Fully-Insulated PVC - Qty 1, part # DW01899-1 and Male Spade Terminal Quick-Disconnect - 16-14 Gauge - Fully-Insulated PVC - Qty 1, part # DW01896-1. If the wiring is a different gauge you will have to go to your local hardware store for the replacement covers. I have included product description links below.
  view full answer...
• Availability of Wiring Splitter to Connect 2-Pin Lighted Hitch Cover to Brake Light Circuit
  It sounds like you have a lighted hitch cover that features a 2-pin connector that is designed to plug right into a 4-Way on the vehicle, similar to the plug end of the GMC # CR-007G. We do not currently have a splitter available that will plug into this harness and provide you with a single 12V lead wire. If you don't want to or cannot plug into a 4-Way on your Sienna, your best option may be to simply cut off the plug end and use some Quick-Disconnect Spade Terminals like # DW01899-1...
  view full answer...