To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This set includes 2 incandescent bulbs with sockets designed to work with Roadmaster's tail light wiring kits.
Features:
Note: See the complete kit RM-155 (sold separately) for wiring harnesses and installation hardware.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the Roadmaster Bulb and Socket Set for Tail Light Wiring Kits. This set includes two bulbs and two sockets, designed to work with Roadmaster's Tail Light Wiring Kit. Each socket has a three-wire design that would easily connect to the Roadmaster Wiring Kit. With these installed in your vehicle, along with a wiring kit from Roadmaster, it's going to allow you to use your towed vehicle signal lights without tapping into the towed vehicle's wiring system. This is going to be ideal for flat towing applications. When installing this, you will need a one inch diameter hole for the installation and around two and a half inches of available space inside the tail light assembly for these to install without harming any other components inside the assembly due to the heat that these will produce. If you ever need to replace a bulb, it uses a 1157 double filament bulb.
They are available and sold separately at etrailer.com. I also recommend using some type of sealant around the mounting area to keep dirt and moisture away from the internal components of the tail light assembly. We do offer some sealant here at etrailer.com. You can check out the related items on this product's page to see the options there. When it comes to the wiring, your black wire's going to be your ground wire. Your brown wire is for the running lights and your red wire is for the brake and turn signals.
That's going to do it for today's look at the Roadmaster Bulb and Socket Set for Tail Light Wiring Kits.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Walter
3/20/2019
RM-155-2 stil working beautifuly each and every time we hook up to travel. Still very happy that we installed this kit to avoid any possible electronic problems with the Equinox wiring system. Great product.

Bill G.
5/28/2017
Perfect!

Josie
1/21/2019
Still working brilliantly!

Heather A.
10/29/2018
RoadMaster Bulb and Socket Set for Tail Light Wiring Kits part # RM-155-2 are replacement bulbs for Roadmaster Tail Light Wiring Kit part # RM-155. The installation instructions for RM-155 require drilling a one inch circular hole through the back of the taillight housings. The holes must be circular and one inch to hold the sockets in place. I have attached a link for the installation instructions on RM-155.
Helpful Links

Lloyd
2/10/2025
Still works. No problems.

Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.











Pauld
10/25/2020
GREAT, Using this kit and bypassing the tow vehicles lighting system has meant many trips with no lighting problems. Defiantly recommend this.