Will the Roadmaster Bulb and Socket Kit Fit a 2010 Honda CR-V

Published 12/20/2012

Products Featured in This Question

Roadmaster Bulb and Socket Set for Tail Light Wiring Kits - Incandescent - Qty 2

(442)

$25.31

Roadmaster Bulb and Socket Tail Light Wiring Kit for Towed Vehicles - Incandescent

(442)

$84.02

Question:

Can you tell me if the 2010 Honda CRV has the same tail lights as the 2012.. Where can you drill the 1 inch hole that will be in the red area and have a 1/4 clearance and also not come in contact with the factory bulb.

asked by: Joseph R

Expert Reply:

I checked with Roadmaster and they do list the bulb and socket kit, # RM-155, as a fit for the 2010 and 2012 Honda CR-V. However, to be certain I recommend drilling a 1/16 inch hole in the back of the tail light housing and then using a small piece of rigid wire or something similar that will fit in the hole, push it in as far as it will go, and then measure how much of the wire goes inside the housing. This will tell you how much space there is. You will need about 2-1/4 inches of depth.

expert reply by: Michael H