RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty
Item # RAS3611-HD
Our Price: $589.00
Confirmed to Fit
2002 GMC Sierra
2500 HD
2500 LD
3500 - Pickup
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (723)
- Q & A (0)
- Photos
2002 GMC Sierra - RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty
- Leaf Springs
- Rear Axle Suspension Enhancement
- Heavy Duty
- RAS
3,000-lb Capacity. Convert your GMC Sierra's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.
Features:
- Heavy-duty custom kit converts your vehicle's factory leaf springs into a mechanically active suspension system
- Actively strengthens leaf springs for improved ride quality with or without a load
- All-in-one suspension system improves stability, handling, and control
- Eliminates axle wrap, wheel hop, and bottoming out
- Reduces dangerous sway and body roll while cornering
- Keeps your ride level when towing or hauling a heavy load
- Improves traction while breaking and accelerating
- Variable-rated coil tension springs automatically adjust to your vehicle's load
- Activate immediately to support the extra weight
- Disengage when unloaded, allowing your leaf springs to perform as intended
- Customizable coil springs can be adjusted during installation to accommodate your towing or hauling needs
- Independently adjustable for side-to-side leveling of off-center loads
- Helps extend the life of leaf springs, shock absorbers, shackles, and even tires
- Durable, epoxy e-coated steel construction
- Corrosion-resistant brackets on the ends of each unit have a salt spray rating of more than 800 hours
- Easy, bolt-on installation - no drilling, cutting, or welding required
- Unit secures under the leaf spring and around the factory U-bolts
- Fully assembled kit and hardware are included
- Maintenance-free - adjustments and monitoring aren't needed once installed
- Made in the USA
Specs:
- Weight capacity: 3,000 lbs
- RoadActive Suspension will not increase your vehicle's weight-carrying capacity
- 5-Year warranty
- 30-Day money-back guarantee
All-In-One Suspension System
When towing or hauling a heavy load, you may encounter a number of problems that can make your driving experience difficult or dangerous, such as sway, body roll, or bottoming out. When your vehicle is weighted down, your factory leaf springs can't counteract these problems to the extent that they are supposed to. The weight will overpower the leaf springs and cause them to twist or flatten out. When that happens, they cannot support, level, or stabilize your vehicle effectively. Additionally, because your factory leaf springs are passive, they won't begin to tackle problems such as sway until those problems have already started.
RoadActive Suspension (RAS) kits enhance those passive leaf springs by converting them into a mechanically active, all-in-one suspension system. RAS kits have variable-rated coil tension springs that automatically adjust to your heavy load. Other suspension systems only solve a few problems and usually at the expense of other improvements your factory leaf springs may need. RAS, on the other hand, is a unique kit that provides everything you want in a suspension system without any trade-offs. It eliminates bottoming out like air springs, reduces sway and body roll like sway bars, keeps your ride level like helper springs, and improves traction and braking control like traction bars. This improves your vehicle's stability, handling, and control while you are towing or hauling, as well as when your vehicle is unloaded. RAS also makes your overall driving and towing experience safer and more comfortable, which greatly lessens driver fatigue.
How RAS Works
Each RAS unit has a powerful variable-rated coil tension spring that converts your passive leaf spring into a mechanically-active system. Once your vehicle is loaded, the tension springs immediately activate to absorb and support the weight. This allows your leaf springs to maintain their bowed position and keeps them from flattening out or flipping over, which greatly hinders their ability to bear a heavy load. The tension springs are variable-rated, which means that the heavier your load is, the more assistance they provide to your leaf springs. Because of this design, RAS reacts instantaneously, whereas hydraulics, air springs, and other suspension systems take time to react. And unlike your factory leaf springs, RAS stops sway and sag before they even start to happen. Additionally, when your vehicle is unloaded, the tension springs disengage, allowing your leaf springs to perform as intended without hardening your ride. RAS won't hinder your leaf springs' movement, nor will it cause any friction between any of the brackets.
Eliminates Axle Wrap and Wheel Hop
When under a heavy load, leaf springs are especially susceptible to axle wrap, which can cause wheel hop. Wheel hop is when the tires lose their grip on the road, causing a jarring, up-and-down movement. Axle wrap occurs when the circular motion of the tires cause the leaf springs to twist or rotate. If the leaf springs twist far enough, wheel hop can occur. RAS stabilizes your leaf springs by absorbing the force of the load they're trying to support. This eliminates axle wrap and wheel hop, as well as prevents your vehicle from bottoming out. Because of this, less strain is put on your vehicle. And by reducing some of this wear and tear, RAS helps extend the life of your leaf springs, shock absorbers, shackles, and even tires.
Reduces Sway and Body Roll
When driving along a curve while towing or hauling a heavy load, the back end of your vehicle or trailer can start to shift with that weight. If your factory leaf springs have flattened or twisted under this load, they won't be able to prevent it from shifting. Because of this, your trailer will sway away from your vehicle. This makes driving challenging and dangerous, as it increases the risk of body roll, which is when your vehicle drastically leans to one side. This can often cause you to completely lose control of your vehicle. Body roll is especially prevalent with multi-passenger vans and vehicles towing long campers, trailers, or boats. RAS provides a much safer ride by reinforcing your factory leaf springs and stabilizing your load. This helps prevent sway from occurring and reduces the chance of body roll while cornering, turning, and swerving. RAS also lessens the rocking motion that happens during windy conditions or when a semi passes by on the road.
Levels Your Ride and Improves Traction
When your vehicle is overloaded, the bulk of the weight transfers to the rear axle. Your factory leaf springs then become overwhelmed by this weight, as they are not strong enough to support it. This causes the back end of your vehicle to sag and the front end to rise, which means that the front tires have lost some of the grip they need with the road. In addition to loss of traction, it can also cause poor headlight aim, unintentional swerving, and an extremely bumpy and uncomfortable ride. RAS bolsters your factory leaf springs and enables them to provide support for your load without compromising ride quality or comfort. This keeps your ride level from front to back whether you are hauling a load in the bed or towing a boat, trailer, or camper. RAS also ensures that your tires have the traction they require while braking and accelerating, which improves the overall driving experience.
Customizable Coil Tension Springs
RAS is also customizable. During installation, the coil tension springs can be adjusted to 2 different tension settings or anywhere in between for improved road handling and support. To do this, rotate the springs while keeping the threaded rod still. As you turn the spring, use one of the 2 included spacers as a gauge to measure the widening gaps between the coils. In order for the RAS units to work as intended, you must tension the coils to a minimum of 25 percent with the 1mm white spacer and no more than 40 percent with the 2mm spacer. The springs can also be independently adjusted to compensate for off-center loads such as a handicap lift.
Easy, Bolt-On Installation
This custom-fit kit comes fully assembled and is easy to install. Each RAS unit simply bolts onto your factory leaf spring with the included hardware, and drilling, welding, and cutting aren't required. First, position the eye hook bracket so that it wraps around the top of the factory leaf spring eye. Then the axle bracket secures under the leaf spring and around the factory U-bolts on the other side of the leaf spring pack. Once the maintenance-free RAS units are fully installed, you won't need to monitor them as you would with air springs.
Corrosion-Resistant Steel Construction
RAS is extremely durable and corrosion-resistant. The units are constructed of high-grade alloy steel, and they have an epoxy e-coat on the coil springs to provide extreme corrosion resistance. The brackets on the ends of each unit resist the effects of water and other elements, and they have a salt spray rating of more than 800 hours.
3611-HD RAS Custom HD Active Suspension System for OEM Leaf Springs - Rear Axle
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty - RAS3611-HD
Average Customer Rating: 4.7 out of 5 stars (722 Customer Reviews)
3,000-lb Capacity. Convert your vehicle's leaf springs into a mechanically active suspension system. RAS adjusts to your load to level your ride. The system also increases stability, handling, and control by improving traction and reducing sway.by: Keith08/26/2022
2017 GMC Sierra 1500
Admitedly, I haven't even rolled my '07 Silverado 2500HD classic out of the garage yet, but I'm already very pleased. I had to go to a neighbor for a 10mm hex key socket and was slowed down by my 7yo kid 'helping', but it was still only 90 minutes my jack stands were in use. Easiest thing to do!
My only small downsides so far:
* needed to find a 10mm hex key that I apparently don't own, not sure why they picked that fastener
* wish I put some loc-tite on; just to make me feel better
* distance to drop the axle so the suspension fully hangs was way further than I expected; barely had my jack stands tall enough to get the job done.
These aren't really bad on the product, just notes for future customers. We're towing the 5er about an hour an a half this coming week, hopefully it steadies up a lot!
by: Steve01/08/2024
2023 Chevrolet Silverado 1500
Love this product. I ordered a set for myself just before Christmas and I was so impressed that I ordered another set for my son’s truck. I was kind of worried that it would raise rear end too much but that wasn’t the case at all. If it raised it at all, it wasn’t noticeable. Definite improvement in handling bumps, cornering, and it eliminated any squat due to my pin weight of the 5th wheel. Highly recommend for an easy install (45 minutes) and overall ride improvement.
by: Tracey04/28/2021
Total transformation! I never knew how bad my ride was until I installed these RoadMaster 3611-HD active suspension. It took longer to safely jack my truck up and remove tires than it was to install them! Absolutely a game changer. I carry about 1000 lbs of tools and supplies daily and like riding a Rollercoaster when hitting bumps. Now, i hit bumps on purpose just to feel these RoadMasters work their magic! Love them!
Tracey T.
4/29/2022
After a year of use , these RoadMaster 3611-HD active suspensions are still the best addition to my trucks performance. The streets of Houston are brutal and these active suspension breeze through them. I have 354000 on this truck and if I ever get another, this Active Suspension will be the first addition. Hands down!
by: Dana 03/15/2024
Chevrolet Silverado
Can't say enough good about the RAS, put it on my Silverado 2500HD with a Spacekap Diablo on back, the RAS brought the ride back to same as stock. Even with a top heavy load there is no more sway than stock and it brought the ride height back to stock. Love the RAS.
by: Roger 03/08/2024
Ram 2500
We installed these on a 2500 box van that is weighted with tools 100% of the time. The RAS helped to reduce "side to side" sway and stiffened the suspension as advertised.
by: Daniel 01/30/2024
I love the RAS. I will say that I took my airbags off and there’s definitely a difference in stability, but the difference in ride comfort far outweighs it. I also have yet to adjust them up a little bit to try that I just set them at the factory recommended setting and did not max them out or anything. Really love them very easy to put on Literally takes a few minutes. The powder coating and everything is exceptional. Highly recommend.
by: Joseph05/11/2021
2010 Nissan Leaf
Silverado 2500HD
Ready to install out of the box. Simply extend the RAS out to become the proper length (shortened for shipping), remove the bolt to allow the fork to drop over the leaf spring and reconnect, hand tighten the assembly via turning the spring and check the "centered alignment", then tighten with a wrench (my socket wouldn't quite fit) until gap disc slips freely between the expanded spring. Took me longer to prep truck on a jack and two axle stands/remove tires for improved accessibility than the actual RAS installations.
Added 1 inch of lift "empty weight". Will see how much squat is removed under load of our travel trailer this weekend!
I'm not very mechanically inclined, and found this very easy to self-install - a level 1 project.
NOTE: etrailer customer service also took their time w/ me over the phone to ensure I had ordered the proper kit for my vehicle, and although my order was sent to the vendor for direct shipment, I got it to Alaska in less than 10 days.
by: Steven 02/14/2024
Added to help when towing my 26' enclosed trailer. Made balancing trailer load easier. No sag. Almost as if trailer lost weight..
by: Nathan A11/07/2023
1999 Ford F-250 Super Duty
Installed this system on a 1999 F-250 SD. I pull a 35 foot 5th wheel trailer that has a pin weight of 2,180 lbs. (I know the exact weights as I have weighed each axle, unloaded and loaded.) Before the RAS install, the trailer would cause the rear of the truck to sag, pitching the nose up just a bit.
I installed the RAS system, and knowing my truck is loaded to the max, I decided to use the 2mm spacer. After the install, the height at the rear bumper was 2 1/4 inches higher. Before the RAS install, the trailer would cause the rear of the truck to drop a full 4 inches. With the 2mm spacer adjusted RAS, the trailer caused the truck to drop about 2 inches in the rear, but the rake of the truck now remains with the nose lower than the rear.
After the initial install, I drove the truck unloaded. The ride was about the same as before, maybe just a bit smoother, hard to say for sure.
This past weekend, we took the truck and trailer to Branson, MO and back, about a 825 mile round trip. What a difference! We hadn't driven 2 miles from home when the wife said, wow, this is a different truck. The ride was fantastic. It eliminated surging we would sometimes encounter on some roads. Bumps and undulations in the road were so much better.
I was really skeptical about this, especially considering the price. But you couldn't pay me to take it off now. I consider the RAS essential equipment now, right up there with EGT and boost gauges, 4" exhaust, diesel brake and added TPMS to all tires. I've been pulling that same 5th wheel for 22 years with that 25 year old truck, and this last weekend was the best pull I've ever experienced. Just wish I had had the RAS on the Alaska highway a few years ago. I am amazed at the improved ride. Couldn't recommend it any higher.
by: Hunter12/28/2023
2018 Chevrolet Silverado 2500
very well built, installed in about an hour and a half (including jacking up and wheel removal and install time). Set at 40% it raised the truck bed exactly 1". Did not notice much difference in how the truck rides empty, which is a big plus for me. Can't wait to hook the 5th wheel up to see the difference.
by: Robert10/27/2021
This is my 2nd set of RAS! Just purchased for towing in my D-Max 2500HD. 1st set we’re on a Chevy 1500. I tow a 7000lb 259FKDS Freedom Express bumper pull and having the RAS-HD’s installed is night and day difference in towing. I have them set at 40% because of my cargo in the truck bed and tongue weight. I’m set up right now as I type on a 100 mile camping trip to set the springs and readjust if needed! So I say….”if you need support with towing, give RAS3611-HD a try…you won’t be disappointed with the results”
by: Michael 02/25/2024
I just opened the box and the two enhancement springs look great. Can't wait to install them.
by: Kclimber09/20/2023
2015 Chevrolet Silverado 2500
So I may have a unique situation that provides almost a perfect analysis of the benefits of the RAS Custom Leaf Spring kit. My friend and I bought the exact same fifth-wheel camper on the same date. We have very similar Chevy trucks and the only real difference is that I have the RAS kit and he doesn't. We drove, one behind the other, from his home to the campground. He complained about the bounce experienced after road bumps but I never experienced that. We switched and drove each others' vehicles for about 100 miles and he was very surprised at the smooth ride he had in my vehicle. We are confident that the only difference was the RAS kit.
GREAT product
by: Gary 10/16/2023
2022 Chevrolet Silverado 2500
Received these ahead of schedule and all intact. I watched the video on etrailer.com and youtube, very helpful.
The installation is not difficult if you are handy with tools. Aside from it deciding to rain on me during install it was not bad. Suggest you lay out all your tools and include a couple of adjustable wrenches. First off, unscrew that gold screw alot, when you think there is enough, go more, the first side I was short. I wiped down the truck springs to remove any dirt there and set up then tightened by hand, you can't go far that way but gets you started. On the rod with the 2 nuts that will lock together when done, I gave myself about 3" of thread and locked them together to hold the threaded rod while adjusting, no way to hold the end nut, this worked out well. The one thing I would have done different is the adjusting nut is 14mm, I only have a 6" ratcheting 14mm, doable but at the end it tough, I wish I had a 10" or so, there was space in my install. I set mine to high since I pull a 5th wheel so adjusting was the hard part.
I will not know until spring if this helps with the towing as the camper is now stored but very hopeful from others input. If anything changes I will update.
by: Marshall F10/05/2022
Installed for nearly 6 months now. I love this suspension! I needed something to give my '18 Titan some heft in the back end when pulling our 24' RV trailer but didn't want to deal with any of the air options out there. After reading the directions twice, I installed both sides before the AC/DC album was finished playing, so it's super fast and easy. I set them on 25% tension and really like how they drastically reduce porpoising during our RV drives. Well worth the cost.
by: Dan H11/12/2023
2007 GMC Sierra Classic
Install was very easy. Worked as advertised. 2007 GMC 2500HD (WT), 8'f bed, extended cab. First trip light/unloaded I noticed an immediate improvement in ride and handling. Next up - Trip with the travel trailer. We'll see how they hold up.
by: Ron 11/08/2023
I had the airbags in the back for years. These far out way them. This is the best thing I ever did!!
by: Ed08/30/2023
Just like most of the other reviews... better ride both loaded and unloaded.
I was going to have a shop put new, OEM springs on my 34 year old F250. I'm so glad I didn't.
I adjusted them to give me 35-40% more capacity. Truck rides so much better, no more sway.
by: TK05/16/2023
I put these on my 2019 Silverado 2500 after i took an RV trip with a 35ft bumper pull travel trailer. I was bouncing around way too much for my liking. after i put these on, i went on a trip out west with a 32ft bumper pull travel trailer and what a difference. No more bounce! The sagging in the back was greatly reduced as well. i didn't notice much of a difference in the feel when I'm driving empty as well. these were pretty easy to install (another plus which saved money) and i trailer a deck over flatbed with logs on it and it really help with that too. highly recommend over airbags, which are nice but more expensive, more difficult to install, and a rough ride when you don't have a load (unless you deflate them)
by: Josh 07/26/2023
Nissan Leaf
Definitely stiffens up the leaf spring suspension not impacting the ride. Just feels like a lot more support.
by: Rick P04/05/2024
The product came quickly and it was the right product no problem there.
by: Robert 08/31/2023
This solved my “porpoising” issue when towing 5000 lb trailer with 3/4 ton truck.
by: Scott 07/20/2023
Definitely work as advertised. Only thing I would note is at the 2mm adjustment there is a slightly firmer ride. But barely noticeable.
by: Eddie 05/22/2023
I bought this product after reading all the other positive reviews. Currently have it on the low setting and my truck height is exactly the same as it was before install under loaded conditions. Unloaded it has raised the back end slightly which I think helps with the overall look of the truck. The ride has improved and the stability has as well. Feel a lot more confident towing now. So far, great product and very satisfied with my purchase.
by: Phillip 09/08/2021
I am very happy with the system. Does exactly what it says it will. I pull a 38' 5th wheel and it would cause havoc with the stock springs. I put these on and noticed an immediate improvement to the bounce while towing my camper. Very easy install. Thanks I would purchase again if I replace my current truck.
25
723
Show More Reviews
See what our Experts say about this RAS Vehicle Suspension
- Best Suspension Enhancement for 2020 GMC Sierra 3500 Towing Fifth WheelFor your 2020 GMC Sierra 3500 single rear wheel diesel the best suspension enhancement option we have is the RoadActive Suspension kit part # RAS3611-CHD for if you have factory top overload springs or # RAS3611-HD for if you do not have them. Unlike other suspension enhancement options the RAS systems give you the best support while also improving ride quality loaded and unloaded unlike other options which make the ride quality rougher especially when unloaded. Stability and handling...
view full answer... - Suspension Enhancement Recommendation for 2020 Chevy Silverado 2500HD with CamperI'd recommend a different route for adding suspension enhancement to your 2020 Chevy Silverado 2500 that has a camper and will be towing. The best suspension enhancement we have for your truck is the RoadActive Suspension system part # RAS3611-HD for if you do not have overload springs or the part # RAS3611-CHD for if you do. Unlike other kits these give you the support you are wanting this also improves the ride quality and handling which is especially valuable when carrying a camper...
view full answer... - Best Suspension Enhancement Recommendation 2020 Nissan Titan SVThe best suspension enhancement option we have for your 2020 Nissan Titan SV towing a fifth wheel trailer is the Roadactive part # RAS3611-HD. This gives you the adjustable support you are wanting, is easy to install, and unlike other options improves the ride quality and handling when loaded and unloaded.
view full answer... - Difference In Ride Quality Between RAS and Heavy Duty RAS on 2022 Chevrolet Silverado 2500When it comes to comparing the ride quality between the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3611 and RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty # RAS3611-HD it is likely you won't notice much of a difference at all. Since the RAS system is adjustable, you can always make changes if you think the ride is a little stiff. It is likely you won't need to though. For that reason, I would choose the # RAS3611-HD for the extra capacity and...
view full answer... - Best Suspension Enhancement Recommendation for 2021 GMC Sierra 2500HDThe RAS systems like what you asked about are the best all-around suspension enhancement for your 2021 GMC Sierra 2500 with the part # RAS3611-HD for if you do not have the factory overload springs or the # RAS3611-CHD for if you do. This kit unlike other options gives you the support you want without any compromises. Other kits will affect ride quality (loaded and unloaded) whereas this actually improves ride quality. It's also easily adjustable, installs easily, and also acts almost like...
view full answer... - Best Suspension Enhancement for 2006 Ford F-350 Towing Fifth Wheel and Carrying CamperThe best suspension enhancement for your 2006 Ford F-350 for both support, ride quality, and stability is the RAS part # RAS3611-HD. With most kits you end up having to sacrifice ride quality to get the support and stability but with the RAS systems you get improved ride quality and handling as well as the support (which is adjustable) so it's by far the best option.
view full answer... - Would Install of Roadmaster Active Suspension Kit Cause Driveshaft Angle to ChangeThe pinion angle would slightly change if you installed a RoadActive Suspension kit part # RAS3611-HD and you were using enough suspension support to change the ride height but it would not be enough of a change to require to change anything. You would not need to make any changes to compensate for this.
view full answer... - Recommended Suspension Enhancement for a 2003 Ford F-250 w/ 5th Wheel Rails I have a solution for you but there are no air bags for your truck that will work with your B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches item # BWRVR3200. They occupy the same location on your 2003 F-250's frame. SumoSprings and Timbrens are also not compatible with that set of base rails. Instead you will want to use the RoadActive Suspension Custom Leaf Spring Enhancement Kit item # RAS3611-HD. This system offers 3,000 lbs in support for your truck's rear...
view full answer... - Recommended Rear Suspension Enhancement For 2021 Chevrolet Silverado 3500 Towing 5th Wheel TrailerThe Timbren Rear Suspension Enhancement System # TGMRCK25D you were looking at are confirmed to fit your 2021 Chevrolet Silverado 3500 towing a 16000lb 5th wheel trailer and will offer plenty of support, but will leave you will a very stiff ride when the truck is unloaded. Instead the best option is an air helper spring kit like the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57341 which will provide up to 5000lbs of load leveling support when you are towing, but can be...
view full answer... - What Rear Suspension do You Recommend for Transporting Heavy Loads Often on My 2022 GMC Sierra 1500?For hauling heavy loads often on your 2022 GMC Sierra 1500, I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty # RAS3611-HD. The great thing about the leaf spring enhancement is that not only does it prolong the overall life of your factory springs, it is completely maintenance-free once installed on your vehicle. As far as the installation, it comes with an easy, bolt-on process. To top it all off, the kit is made 100% in the U.S.A. The kit fits both...
view full answer... - Recommended Suspension Enhancement for 2022 Chevrolet Silverado 2500 Towing a Horse TrailerThe RoadActive Suspension Custom Leaf Spring Enhancement Kit will be a great choice for your 2022 Chevrolet Silverado 2500. Since you're going to be towing a heavy horse trailer, I recommend using the heavy duty kit # RAS3611-HD instead of the the # RAS3611. The RAS system turns your vehicle's factory leaf springs into a mechanically active suspension system. Not only will this improve stability and control, it will also help prolong the life of your leaf springs, shocks and tires. This...
view full answer... - Difference Between RoadActive Suspension Kits for 2020 GMC Sierra 2500For your 2020 GMC Sierra 2500 the difference between the HD versions of the RoadActive Suspension kits is that the part # RAS3611-CHD fits vehicles with overload springs whereas the # RAS3611-HD fits versions without the overload springs. These kits would work great with a rear sway bar like the # RM25FR as well. The two kits together would offer really great sway reduction and handling improvements.
view full answer... - Selecting The Correct RoadActive Suspension System For a 2024 GMC Sierra 2500First you will need to determine if you have an upper or lower overload spring on the leaf springs for your 2024 GMC Sierra 2500. If you have a top overload spring you will need the Kit # RAS3611-CHD. Otherwise we have the 2,000LB # RAS3611 or 3,000LB # RAS3611-HD for trucks with lower overload springs. For selecting the correct weight rating I recommend using the 2,000lb kit for occasional loads and the 3,000lb kit if your truck constantly carries heavy weights.
view full answer... - Best Suspension Enhancement For 2021 GMC Sierra 3500 Single Rear Wheel When Towing 5th WheelWe can get your 2021 GMC Sierra 3500 with a single rear wheel set up with an outstanding suspension enhancement option that will help your truck's sag, improve it's handling, won't negatively affect your unloaded ride, is simple to install relative to other options, and requires no maintenance whatsoever. The best enhancement option for your truck that meets all these criteria is the RoadActive Suspension Custom Leaf Spring Enhancement Kit. There are two options for you, depending on...
view full answer...
- Could RoadActive Suspension Kit be Used on 2000 Ford F-150 with Add a Leaf to Rear SpringsThe RoadActive Suspension # RAS4612 hasn't been tested on your 2000 Ford F-150 with added leafs to the rear suspension. There's a chance it might work, but there's also a large chance you'd have to remove the added leafs to be able to install this. This would give more support than the added leafs anyway so either way this will be a good solution for you. Otherwise you can keep the suspension the way it is and use a Timbren kit part # TFR1525HD which is a confirmed fit and will give you...
view full answer... - Recommended RoadActive Suspension Kit for Towing Horse Trailer With 2022 Chevy Silverado 2500I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty # RAS3611-HD for your 2022 Chevrolet Silverado 2500. The heavy duty kit is a great idea since you will be towing your heavy horse trailer most of the time. It has a weight capacity of 3,000 lbs and will help keep you level while towing. This turns your leaf springs into a mechanically active suspension system and disengages when unloaded. The # RAS3611-HD will also help to extend the life of your leaf...
view full answer... - Recommended RoadActive Suspension Kit For A 2022 GMC Sierra 2500 With An In Bed CamperThough it will ultimately depend on how much your camper weighs and how much sag you experience, there are a few differences between the 3 options available for your truck. First is the # RAS3611. This will have a 2,000 pound weight capacity and will be used in mild to moderate cases of sagging. With you having a Sierra 2500, I assume you will have a pretty heavy camper in the bed, so this may not be the best option. With that said, we come to the # RAS3611-HD and # RAS3611-CHD. These...
view full answer... - Highest-Rated RoadActive Suspension RAS System Available for 2002 GMC 2500HDFor your 2002 GMC Sierra 2500HD, the highest rated RoadActive Suspension System offered would be part # RAS3611-HD which is compatible with 2wd and 4wd trucks. The system provides up to 3000 lb of additional support to counteract the sag caused by towing heavy trailers or from hauling heavy loads in the truck bed. The system will also reduce body roll and sway and will improve traction when accelerating or braking. I've linked to a product video explaining more about how the system works....
view full answer... - Determining If RAS Leaf Spring Enhancement Kit RAS3611-HD Will Fit 2007 Chevy 2500HD ClassicThe RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty # RAS3611-HD you were looking at is confirmed to fit your 2007 Chevrolet Silverado 2500HD as long as it does NOT have the top overload springs. If your truck does have the top overload springs you will need to go with the # RAS3611-CHD instead. Both options have the same 3000lb load capacity which will do a great job of preventing sag when towing a trailer or carrying a heavy payload, but will also eliminate axle...
view full answer... - Benefits Of Using RoadActive Suspension With Timbren Jounce Springs On a 2015 GMC Sierra 2500You will still get additional benefits with the RoadActive Suspension # RAS3611-HD on your 2015 GMC Sierra 2500. With your Timbren # TGMRCK25D system this will only provide benefits to your suspension when it is loaded. The RAS provides benefits even while you are unloaded. It will help reduce things like axle wrap, wheel hop and body roll. It will also give you increased sway reduction with the Timbren system.
view full answer... - 2006 F-250 Super Duty Suspension Enhancement for Towing Horse TrailerTo give your 2006 Ford F-250 additional suspension support when towing your horse trailers I recommend the RoadActive Suspension kit part # RAS3611-HD which will give you adjustable suspension support of up to 3,000 additional lbs and unlike other options does not make the ride quality harsh or uncomfortable which is why I recommend it as the best option. You should note that kits like this do not increase the towing capacity of the vehicle overall but instead just help support the suspension...
view full answer... - Suspension Enhancement Recommendation for 2000 Chevy K2500We have really great suspension enhancement kits that do fit your 2000 Chevy K2500 but none of the air bag kits are a fit with the in-bed hitch you have since the brackets mount on the same part of the frame. What I would recommend instead is a RoadActive Suspension kit like the part # RAS3611-CHD for if you have factory overload springs or part # RAS3611-HD for if you do not have the overload springs. The RAS kits over adjustable support that is easier to install, easier to adjust, is...
view full answer... - Can Roadactive Suspension Kit Fit 2007 Ford F-350 with Factory Overload SpringsHey Nick, yes the RAS kit part # RAS3611-HD can be used on your 2007 Ford F-350 that has the factory helper springs but you would need to remove them prior to install of this.
view full answer... - What Setting for RAS HD Installed on 2023 Chevrolet Silverado 2500We have no way of really knowing how much it will squat exactly since there are too many factors. It will also depend on the shape your suspension is currently in. Since it is a 2023 Silverado 2500 I would expect it to be in good shape unless you really put it to work this last year but that is just one of the possible variables. Regardless, I would go ahead and start with the highest setting on the # RAS3611-HD. This will do the best job keeping you level with the 5th wheel hitch in and...
view full answer...
Do you have a question about this Vehicle Suspension?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Chris R
Written by:
Mary K
Updated by:
Wilson B
Updated by:
Noah M
Installed by:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Keith
8/27/2023
Its been really wonderful. 10k 5er on my 07 2500hd classic ccsb and I can definitely notice an improvement in handling, including less porpoising. Towed it a couple times since, including a 7 hour drive. Very happy. I recently replaced the old wornout front bumpstops with sumo springs monsters and saw additional improvement. Neither hurts the unloaded ride, just better all around!