Best 1995 Dodge Ram Pickup Truck Vehicle Suspensions

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I installed these on my 2009 Ram 1500. The product was exactly as described and even with being located in Alaska, they arrived super quick! I haven't had the chance to test them out loaded yet as I just installed them last night, but plan on revising my review after the load testing goes! I will note that I installed these differently than stated in the instructions. I lifted the truck off the ground with the axle hanging and removed the rear coils completely and installed the air bag. This seemed like a much quicker and easier route than trying to fish the bag through the coil on the truck. I also routed my air lines in the rear bed stake pockets and under the edge of the bed to protect the valve from the weather. I will add that I have the Tuf-Truck 1223 rear coils and not the stock coils in the rear. I was hesitant to purchase airbags as its not the factory coil, but it worked out perfectly! with the HD coils and Airbags I should have no issues with sag. Overall I am really satisfied with this purchase. Every ram 1500 with coils should have these.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Shipped quick, boxed well, simple instructions. Installation was a bit more difficult than expected, but not impossible. If I could do it again, I’d remove the fender wells like the etrailer video suggests. I do recommend using zip ties to fold the bags down prior to slipping them in the coil springs. Hooked up my camper, hooked up the weight distribution bars, added air, and it significantly reduced the sag and raised the camper to a level position on my 2017 Ram Big Horn 4x4 towing a 26’ forest river camper 5750 lbs. I had no leaks after a 16 hour leak down test at 35 psi. Just a fantastic and inexpensive upgrade that drastically improves ride quality and stability. No more sweaty palms while driving!

Click to Enlarge

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fast shipping always a great place to order from thanks jeff

Fast shipping always a great place to order from thanks jeff

Having been in the auto/truck repair business for over 50 years, I thought this would be a good Idea so I tried it. I could have made my own but it would be a lot of cutting and drilling because it is so many pieces. I used it to add capacity so I could haul my camper that I purchased three states away and had to pick up. I used 2 of the 3 plates because there wasn’t enough room for three. It did very well like that but after I got back I added the 3rd plate figuring I could use the third one by just jacking the truck slightly before engaging. I thought all three woul be needed once the camper was full of water and gear. I am enclosing a picture of how ti drill the springs with using the vehicles own drill press (screw jack) for changing tires. I still need to test fully loaded and with all three plates in place.

Click to Enlarge

Click to Enlarge

Used these on a 2013 Ram one ton dually hauling a 4500 lb truck camper. Truck also has airbags. Problem I had with the airbags when pressured up the truck would porpoise and had side to side sway. Install of the stable loads for me was four hours. The leaf spring was extremely hard to drill. I only needed one drill bit to do all four holes. Used a lot of oil. Using a little less pressure in the air bags (10 psi less) the sway and porpoise was greatly reduced. Giving me more security in the vehicle set up. I put these on just before a two week trip. I was so glad I did.

Was a straight forward installation. Everything went smooth

These are very easy to install and work very well for lifting my heavy 5th Wheel on to my RAM 2500. I highly recommend these for anyone who question lifting capabilities of their current truck.

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Awesome ordering process and customer service! Great product, solid and complete with everything you need. Fit perfectly and solved the issue I was having. 2018 Ram 3500 dually, perfect fit and finish. Definitely would order again from etrailer, great company to work with.

I have the upper and lower stableload suspension upgrades on my 2001 2500 Dodge Ram diesel pickup. I had these installed before a cross country trip with my heavy gooseneck horse trailer. There is significant improvement in handling and steering. The truck now hauls the trailer with much less stress as the weight of the trailer seems to be much better distributed. The truck bed used to sag a bit when I attached the trailer (even with factory overload springs) and now that's not happening. I believe that there is possibly less wear and tear on the rear tires as well. I am pleased with this upgrade and have recommended it to my horse hauling friends. I haven't bothered to disengage the lower stable loads so the ride is stiffer when there's no load, but it's really not an issue right now.

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I put these Air Helper Springs on a 2013 Ram 2500. Installation of the air bags took a little over two hours and was easy following the instructions. No drilling was requited. Just make sure you do not forget to complete a leak check and make sure to cut the airlines with a very sharp cutter. I purchased the Helper Springs to assist the truck springs and reduce sag when pulling our 17,000 Lb fifth wheel toy hauler with a 3,700 Lb tongue weight. I chose this part number because of the jounce bumper since they would prevent the springs from totally collapsing should total air loss occur. They do the job reducing the sag and increasing vehicle stability. Shout out to etrailer.com for excellent products at reasonable prices.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This product is awesome. It only took me about two hours to put it on my Ram 2500 using standard hand tools. I paired it with the WirelessOne compressor system and it’s perfect. It eliminated my trailer squat and actually makes my truck ride better even without the trailer. If you’ve got a Ram that needs a little bit more suspension, look no further!

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Got My Order right away, everything was intact, no damage. I had watched some install videos online which helped with the instructions. Had to make minor alterations, one was the cut out for the axle vent tube which was mentioned in the instructions, the other was to cut off the corner of the top mount to give clearance to the exhaust shown by the red arrow in photo. I'm sure not every exhaust is exactly in this position, but mine was, not a big deal. This install was on a 2009 Dodge Ram 2500 4WD.

Click to Enlarge

Click to Enlarge

I had my Load Lifter installed by my local mechanic. He was impressed with the quality and ease of the installation. I have a Ram 3500 Mega Cab 6.7 liter Cummins 4x4 DRW. Rather than drill any holes in my truck, I had him install the Schrader valves on each side of the inner fender wells above the dual rear wheels. There were factory holes there that the valves fit in perfectly. I am planning on adding the onboard compressor at a later date. The only issue was the upper bracket on the passenger side. It needed to be trimmed for tail pipe clearance. My exhaust is factory so guessing the bracket design was for gas exhaust models which have a smaller diameter tail pipe. Everything else went perfectly. Customer service was fantastic. Thank you Caroline!

Product arrived in a short time and was easy to install in my driveway. Works GREAT!!!

Everything was as good as it looked. One item was lost somewhere and was corrected when it needed to be.

Looks like good product. Haven't installed them yet but looks like good quality.

The super springs installed easily. Won't be able to try them out for a few months, waiting for the camping season.

Fast shipping always a great place to order from thanks jeff

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge