Most Popular Heavy Duty for 1995 Dodge Ram Pickup

Fast shipping always a great place to order from thanks jeff

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fast shipping always a great place to order from thanks jeff

Having been in the auto/truck repair business for over 50 years, I thought this would be a good Idea so I tried it. I could have made my own but it would be a lot of cutting and drilling because it is so many pieces. I used it to add capacity so I could haul my camper that I purchased three states away and had to pick up. I used 2 of the 3 plates because there wasn’t enough room for three. It did very well like that but after I got back I added the 3rd plate figuring I could use the third one by just jacking the truck slightly before engaging. I thought all three woul be needed once the camper was full of water and gear. I am enclosing a picture of how ti drill the springs with using the vehicles own drill press (screw jack) for changing tires. I still need to test fully loaded and with all three plates in place.

Click to Enlarge

Click to Enlarge

Used these on a 2013 Ram one ton dually hauling a 4500 lb truck camper. Truck also has airbags. Problem I had with the airbags when pressured up the truck would porpoise and had side to side sway. Install of the stable loads for me was four hours. The leaf spring was extremely hard to drill. I only needed one drill bit to do all four holes. Used a lot of oil. Using a little less pressure in the air bags (10 psi less) the sway and porpoise was greatly reduced. Giving me more security in the vehicle set up. I put these on just before a two week trip. I was so glad I did.

Was a straight forward installation. Everything went smooth

These are very easy to install and work very well for lifting my heavy 5th Wheel on to my RAM 2500. I highly recommend these for anyone who question lifting capabilities of their current truck.

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Awesome ordering process and customer service! Great product, solid and complete with everything you need. Fit perfectly and solved the issue I was having. 2018 Ram 3500 dually, perfect fit and finish. Definitely would order again from etrailer, great company to work with.

I have the upper and lower stableload suspension upgrades on my 2001 2500 Dodge Ram diesel pickup. I had these installed before a cross country trip with my heavy gooseneck horse trailer. There is significant improvement in handling and steering. The truck now hauls the trailer with much less stress as the weight of the trailer seems to be much better distributed. The truck bed used to sag a bit when I attached the trailer (even with factory overload springs) and now that's not happening. I believe that there is possibly less wear and tear on the rear tires as well. I am pleased with this upgrade and have recommended it to my horse hauling friends. I haven't bothered to disengage the lower stable loads so the ride is stiffer when there's no load, but it's really not an issue right now.

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I put these Air Helper Springs on a 2013 Ram 2500. Installation of the air bags took a little over two hours and was easy following the instructions. No drilling was requited. Just make sure you do not forget to complete a leak check and make sure to cut the airlines with a very sharp cutter. I purchased the Helper Springs to assist the truck springs and reduce sag when pulling our 17,000 Lb fifth wheel toy hauler with a 3,700 Lb tongue weight. I chose this part number because of the jounce bumper since they would prevent the springs from totally collapsing should total air loss occur. They do the job reducing the sag and increasing vehicle stability. Shout out to etrailer.com for excellent products at reasonable prices.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The product is very good. Customer service is great. I had an issue with one of the pressure lines after warranty period. I contacted the manufacturer and they sent me a replacement part at no charge. The bags work great on my ram 3500 dually. Very happy woth the product.

The Ride-Rite Extreme Duty Air Springs (RED Label) worked great on my RAM 3500 DRW. I pull a 40' Montana 5th wheel. 15,000 lbs and about 4,000lbs on the truck bed. I had the NON Red Label rated at 5,000 lbs and blew one airbag on extremely bumpy Illinois Interstate. I have put about 20,000 miles on the RED label airbags rated to 7,500lbs and have been VERY happy. P.S. I am not one of those Saggy rear end trucks that shine their headlights in your eyes thanks to the support I get from these air bags. Level ride = level lights

Click to Enlarge

Fast and great shipping... The kit is easy to install.... you'll need to loosen the inner spring u-bolt to get er next to the spring..... I'm impressed with 50 psi... jacked it up nicely....

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Got My Order right away, everything was intact, no damage. I had watched some install videos online which helped with the instructions. Had to make minor alterations, one was the cut out for the axle vent tube which was mentioned in the instructions, the other was to cut off the corner of the top mount to give clearance to the exhaust shown by the red arrow in photo. I'm sure not every exhaust is exactly in this position, but mine was, not a big deal. This install was on a 2009 Dodge Ram 2500 4WD.

Click to Enlarge

Click to Enlarge

I had my Load Lifter installed by my local mechanic. He was impressed with the quality and ease of the installation. I have a Ram 3500 Mega Cab 6.7 liter Cummins 4x4 DRW. Rather than drill any holes in my truck, I had him install the Schrader valves on each side of the inner fender wells above the dual rear wheels. There were factory holes there that the valves fit in perfectly. I am planning on adding the onboard compressor at a later date. The only issue was the upper bracket on the passenger side. It needed to be trimmed for tail pipe clearance. My exhaust is factory so guessing the bracket design was for gas exhaust models which have a smaller diameter tail pipe. Everything else went perfectly. Customer service was fantastic. Thank you Caroline!

Product arrived in a short time and was easy to install in my driveway. Works GREAT!!!

Everything was as good as it looked. One item was lost somewhere and was corrected when it needed to be.

Fast shipping always a great place to order from thanks jeff

These are fantastic and I would highly recommend them. I placed these on my 1995 Dodge Ram 2500 Cummins after I put my slide in camper on. It eliminated almost all of the body roll and tightened the suspension up progressively . Very good product and easy to install.

These work perfectly for my multiple trucks and trailer with loads. A bit stiff if hitting bumps such as going over speed bumps or onto/off of uneven bridges with uneven surface but all in all work as they should.

Click to Enlarge

Click to Enlarge

Click to Enlarge

my air lift is missing some parts because my 06 Dodge Ram 3500 doesn’t have a jounce bumper strike plate attached to the axe mine needs something like u bolts and when I purchased the air lift it’s said that it would feet my pick up

Click to Enlarge

Click to Enlarge

I've had this product installed for a year now, and it still hasn't let me down. I was skeptical about how close the bag sat next to the exhaust but haven't had a problem yet. The install was a breeze. If you are in the market and think these might help. Buy them and they will absolutely astound you with what they make your truck capable of towing confidently. I have a 04 single cab short bed ram 1500 that clocks in at the dump at 12k loaded. Thank you guys, these will go on all my work trucks.