To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Your engine has spent the night in freezing weather, but the morning drive still needs to happen. This Zerostart heater warms coolant before startup, easing cold-start strain and helping your engine warm up sooner.
When your vehicle spends the night outside in freezing weather, starting the engine can take more effort than usual. This 400-watt Zerostart heater warms the coolant inside your engine block before you turn the key. With the engine already warmer, there's less cold-start strain, and it can reach operating temperature sooner. It's a practical addition when winter weather is part of your regular driving routine.
This heater screws into a designated 1" NPT threaded opening in your engine block. Although it's categorized as frost-plug style, it doesn't press into a smooth core-plug hole or slide into a dry cartridge cavity. The opening needs to be the correct size and in the proper location for your engine. Use the vehicle fit information to confirm compatibility, then check the 2026 Zerostart catalog linked below (instruction link B) to find the specified installation location. The linked manufacturer's installation instructions explain the procedure in detail.
Installation involves draining the coolant and removing the designated threaded plug. Apply pipe-thread sealant or PTFE tape to the heater threads as directed, then install and tighten the heater securely. Refill the cooling system, run the engine to check for leaks, and remove trapped air before applying power. The heating element must be completely submerged in coolant whenever the heater is plugged in.
The included 5' silicone cord has a right-angle connector and can be routed toward the front grille, giving you a convenient place to plug in before a cold-weather departure. Secure the cord away from hot engine parts, sharp edges, and anything that moves. Phillips & Temro recommends plugging in the heater at least 3 to 4 hours before departure to give the coolant time to warm up. Also, remember to always unplug it before starting your engine.
Zerostart is a Phillips & Temro brand. You may recognize Phillips & Temro from original-equipment engine-heating applications even if the Zerostart name is unfamiliar. The company develops and tests heaters for specific engines and supplies both factory and aftermarket applications. That experience is worth knowing about when you're choosing a heater that needs to fit a particular opening in your engine block.
Use a 50/50 mixture of ethylene glycol antifreeze and water. Never use straight antifreeze or a mixture containing more than 65% antifreeze, as this can cause the heating element to fail prematurely. Avoid stop-leak additives. Follow the manufacturer's instructions for sealing and tightening the threaded heater. Use the specified pipe-thread sealant or PTFE tape, and avoid overtightening, which can damage the threads or compromise the seal.
Never plug in the heater before installation just to see if it works. Without coolant surrounding the heating element, it can quickly overheat and cause serious burns. Instead, disconnect the heater from power and use a multimeter to check resistance directly across its electrical pins. The manufacturer's general testing guidance specifies a reading between 5 and 100 ohms.
Always make sure the heating element is fully submerged in coolant and any trapped air has been removed before plugging it in. Unplug the heater before starting your engine. Running the engine while the heater is plugged in can create an air pocket around the element, causing it to overheat and fail prematurely.
When disconnecting the heater from your extension cord, firmly grasp each plug and pull them apart. Never yank on the cords themselves. This can damage the electrical connections, potentially causing the heater to malfunction or creating an electrical short.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a quick look at the Zerostart custom fit frost plug style engine block heater. Now this is designed to fit select 2003 to 2024 Jaguar, Land Rover, and Ford vehicles equipped with the 3.9 liter, 4.2 liter, or 5.0 liter V8 engines. So that includes the Jaguar F-type, the XF, XJ, and XK and the S-type models, the Land Rover LR4, Range Rover and Range Rover Sport, and then the 2003 to 2005 Ford Thunderbirds. Now on custom fit parts such as this heater, I do recommend going through our vehicle fit guide here at etrailer.com. Simply input the year, make, and model of your vehicle and any other questions that it might ask you.
And our fit guide will confirm if this will work for you or if we have something comparable that will work for you. Now, cold mornings don't have to mean slow starts or long warmups. This custom fit Zerostart block heater is going to get your engine ready before you even turn the key. By warming up the coolant ahead of time, it's going to help your engine fire up smoothly and reach operating temperature faster, so you can hit the road without waiting around. So when the temperatures drop, you know that engines can struggle.
Thick oil, cold metal parts, and dry starts are going to put extra strain on your starter and reduce your engine's life. This block heater is going to take care of that by pre-warming that coolant, so your engine turns over quickly, runs smoother right away, and avoids that unnecessary wear. And unlike universal heaters that often need tweaking or extra parts, this one is built specifically for your vehicle's engine as we saw just a minute before. So this is going to install right in the frost plug, the spot designed for efficient heat transfer. So that's going to give you a clean hassle free setup.
This is going to give you up to 400 watts of steady heat at 120 volts. And this is going to give you reliable warmth. It's going to keep your coolant ready to go. And this cord is removable as you can see. So if for whatever reason you might damage this cord, you'll be able to get a replacement without replacing the whole heater.
The length of the cord, it's a silicone cord, is five feet long. So this is going to stand up to tough conditions, and it can be easily stored or replaced as I mentioned when needed. And this is a first for me to see on a frost plug heater. Zerostar also includes this cap for the plug when it's not in use to keep it clean. So that's a nice touch. You'll just slide that onto the cord to keep it tethered there. So this is going to fit one inch NPT bore diameter and the insulation is going to be relatively simple. So you'll just follow the instructions. If you happen to have any further questions about this or anything else that we carry, don't hesitate to reach out to us, because, ultimately, we want to make sure that you're getting exactly what you want and need. Well again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.