Inno Velo Gripper Bike Rack for Truck Beds - Clamp On
Item # INRT201
Retail:$135.86
Our Price: $107.99
You Save: $27.87
Confirmed to Fit
2012 GMC Canyon
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (178)
- Q & A (0)
- Photos
2012 GMC Canyon - Inno Velo Gripper Bike Rack for Truck Beds - Clamp On
- Frame Mount
- Compact Trucks
- Full Size Trucks
- Mid Size Trucks
- 15mm Thru-Axle
- 20mm Thru-Axle
- 9mm Axle
- Inno
- 1 Bike
Space-saving carrier lets you transport 1 bike in your truck bed. Adjustable, ratcheting straps hold your bike firmly by the fork and seat stay. Clamp-on installation onto truck bed side rails. Built-in D-rings provide cable lock tie-down points.
Features:
- Space-saving carrier lets you transport 1 bike in your truck bed with standard side rails
- Ratcheting straps with adjustable rods hold your bike firmly by its fork and seat stay
- No front wheel removal necessary
- Built-in D-rings provide tie-down points for a cable lock
- Easy, clamp-on installation to truck bed side rails
- Hardware included
- No drilling required
- Steel clamps with silver powder coat are strong, durable, and rust resistant
Specs:
- Application: truck beds with standard side rails
- Weight capacity: 33 lbs
- Clamp dimensions: 2-13/16" long x 1-5/8" wide
- Length of rods: 6-3/8"
- Length of ratcheting straps: 8-3/4"
- D-ring weight capacity: 66 lbs
- Limited lifetime warranty
The space-saving Velo Gripper bike carrier lets you transport 1 bike in your truck bed. Because your bike sits along the side of your truck bed, you'll have plenty of room for everything else you need to haul. This carrier mounts easily onto the side rail of your truck bed, and ratcheting straps hold a bike of any shape or size by the seat stay and fork. Built-in D-rings act as tie-down spots so that you can secure your bike with a cable lock or secure other cargo with a bungee cord or tie-down strap.
Hassle-Free Bike Mounting
Two ratcheting straps on adjustable rods hold one bike of any shape or size by the fork and seat stay - no need to remove your front wheel to mount your bike. The rods rotate so the holders can grab your bike from any angle. Rotating the rods also allows you to adjust the amount of space between your bike frame and the side of your truck bed. That way, you can position your bike close enough to the side of your truck bed to save space but not so close that your bike and truck bed make contact.
Simple Truck-Bed Installation
The Velo Gripper installs without drilling onto your truck bed. To install, place the included protective plates on top of your truck bed rail to prevent the mounting brackets from scuffing or scratching the paint. Then, position the mounting brackets over the protective plates. Tighten the clamps down with the eye bolts to complete installation.
Space-Saving Design
Your bike will rest on both wheels in its normal upright position on the inside of your truck bed. This mounting style leaves most of your truck bed open to carry other gear. You can position your bike at the front or the rear of your truck bed to help reduce the potential for the bike to roll. This not only reduces pressure on the Velo Gripper but also saves space in your truck bed.
D-Ring Attachments
Each clamp has an attached D-ring that enables you to use tie-down straps with or without your bike mounted. Loop a a cable lock with a maximum diameter of 3/4" (sold separately) through the D-rings or the eye bolts and through your bike frame to lock the carrier to your truck and your bike to the carrier. A 5' - 6' long cable is recommended for locking your bike and both clamps. When you're not transporting a bike, these D-rings make great tie-down spots for securing other gear in your truck.
RT201 Velo Gripper Clamp-On Truck Bed Bike Carrier for Standard Bed Rails
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Inno Velo Gripper Bike Rack for Truck Beds - Clamp On - INRT201
Average Customer Rating: 4.6 out of 5 stars (178 Customer Reviews)
Space-saving carrier lets you transport 1 bike in your truck bed. Adjustable, ratcheting straps hold your bike firmly by the fork and seat stay. Clamp-on installation onto truck bed side rails. Built-in D-rings provide cable lock tie-down points.by: Robert07/28/2022
Using the Grippers for carrying 2 ebikes, weighing 55 & 75 lbs. I know this is above the rated bike weights but so far they have performed well. My short bed keeps the 75# bike pretty well locked in front to back so that may help.
by: Bill05/02/2024
1 year ago, ordered 2 pair Inno Velo clamp on bike rakes for pickup. One pair received damaged/used. eTrailer credited 50%. Rated average for 2 reasons. First, I couldn't get them to work securely with my tonneau cover without modifications (plastic spacer blocks to clear tonneau rail) and I can't close the tonneau cover over them when not transporting bikes. Second, while not recommended for ebikes, they kinda worked but are not strong enough for the weight of the bikes especially when needing to extend to full length. I like the idea but just doesn't meet my needs. Otherwise, they should work just fine under different applications. Best use is to install and left installed. In my circumstance, removal & reinstallation was a pain.
by: Andrew06/12/2023
I am disappointed that they don’t hold my bikes better than they do. I still have to strap them down so they don’t fall out. They are pretty expensive for what you get. I need to modify them so they will actually work. Not really what I was expecting to do, but I need to so my bikes are secured.
Jenny N.
6/14/2023
I would like to see what is going on with your bike and the Velo Gripper. Would you be able to send pictures of your bike installed with the Velo and the additional straps that are needed?
by: Andrew 03/06/2024
Works great! No bike rack hanging off the back or blocking the tailgate. I also run a cable lock through one of the bed tie downs to secure the bike if I have to walk away.
by: Peter 04/17/2024
Ford F-250 Super Duty
Very adjustable and versatile. Definitely meets my needs to secure a Specialized Roubaix in the bed of an f250.
by: Linda07/29/2022
We take our ebikes when camping, but because the RV uses the truck hitch, are not able to use a rack. Tailgate keepers allow too much movement of bikes plus they are susceptible to rocks and other road damage. We ordered the Inno Gripper hoping to carry the bikes inside the truck bed. As with most ebikes in a standard truck bed, they are too long to fit straight in, so the front wheel must be turned in order to fit the bikes and shut the tailgate. As a result, the front frame is several inches further from the side, so the gripper doesn't reach the frame. I found the dimensions of the threaded rod and replaced with one several inches longer so the gripper would extend to the bike. Voila! Our ebikes are securely attached to the truck bed with virtually no movement. We've traveled nearly a thousand miles with our ebikes safely secured by the Inno Velo Gripper and couldn't be happier. Even friends who previously used tailgate keepers or racks have switched to the gripper as it secures the expensive bikes so much better than other options. etrailer did not have the longer rods, so I purchased on [online]. Inno really should make extended rods available as an option as everyone I know has an issue with bike length in their truck bed (the reason they go with tailgate keepers and racks). It took me a long time to find the properly threaded rod and extra couplers.
Linda
7/30/2023
Still working well! We have travelled over 15,000 miles with the Grippers to this point!
by: C Jones10/13/2022
1991 Chevrolet C/K Series Pickup
Easy installation. No holes to drill in my truck bed. Holds my bike securely. It was everything that I was looking for in a rack for my new bike.
C J.
10/15/2023
Fantastic! Everything about the clamp system works well for me. I get an easy to use clamping system for my bike and still have room in the bed of the truck for other gear. The system secures my bike well for highway travel but is still quick and easy to use every day to get to trail. I highly recommend it for trucks.
Mike L.
11/7/2023
@CJ Glad to hear your # INRT201 Inno Velo Gripper bike rack is working well for you!
by: Chad B03/18/2019
2018 Pontiac Trans Sport Van
Great product that works as advertised. I have a 2018 f150 5.5’ box. I have used this twice to transport my bike and the bike is really secured well. I have to leave my tailgate down as the bike comes out of the bed maybe an inch or 2. The wheel well in my bed does slightly get in the way when screwing in the eye bolt but once in place it hold the bike perfectly. I do use a stretch cord also due to the fact that the tailgate must be left down.
by: Rick 09/14/2023
We love the Velo Gripper Bike Rack! I use it in conjunction w/my homemade pvc rack & I can haul two eBikes that weigh 60lbs each. I have less than a $100 in this set up & it’s inside the truck bed instead of paying $4-600 for a bike rack strong enough to hold the eBikes on the back of the truck w/the receiver hitch. We have hauled our bikes from NW AR to Gulf Shores AL a couple times to ride at the “Gulf State Park” (11 hours one way) & up to the “Katy Trail” in central Missouri (5 hour trip one way); not to mention all the local trips to the Razorback Greenway in NW AR. It only takes a couple minutes to attach the Velo Rack to the truck.
by: Joe 01/10/2024
These seem to be perfect for our electric bikes. What an awesome idea for the bed of a truck.
by: MAF08/22/2023
I bought two sets of these for our Rad E-bikes and they have performed and held up great. They state there not for bike Weight capacity more than: 33 lbs but it works perfectly with our bikes. Only draw back is they need to be removed if you have a tonneau cover over your bed and you want to keep it covered.
by: Jose03/31/2024
GMC Canyon
Disappointed ! Scratched my forks . Bike would lean at an acward position. I used it on a gmc canyon . Not enough reach. But when fully extended became less stable. Causing bike to lean.
by: Tack05/05/2024
2021 Toyota Tundra
They hold my bike upright with no wobble. It sure beats laying my new bike down in the back of my truck bed.
by: Barton07/11/2023
Before purchase the website said the bike carrier would fit a 2017 ford 350. Upon arrival the rack wouldn’t mount appropriately to secure my Yeti SB130 mountain bike. It became obvious the carrier was designed to hold much older conventional bike frames. Certainly misleading and disappointing.
by: Warren 06/17/2023
We have been using these for about 1 year. They hold the bikes very secure. They are easily removed if necessary, but I just leave them attached. They are very easy to use!(my wife secures her own bike) I like these much better than any other truck mount option! If your bedliner has ridges, it can be a little bit of a challenge finding the right placement for each bike. I ended up with one bike facing forward and one backwards. Works perfectly!
by: Marc09/18/2022
Easy to install Could be deeper C channel to make adaptation with a Leer cover a bit better.
They look great and very adaptable to any size bike frame
by: Donnie07/14/2019
2009 Chevrolet Silverado
Great product money well spent! Little bit of a challenge to figure out how I was going to make it work with a pickup with a toolbox in the back especially having a Fat Tire Bike but the flexibility of the clamps makes it very easy to find a location to hold up my bike. Looks dope and works great easy on easy off. Note to self when the clamps are on Mark the edges with a marker or paint pen so this way when you take the clamps off you can put them right in the same spot and you don't have to worry about figuring out where they go again
by: Rici07/23/2021
I ordered these grip clamps so we could transport our electric bikes upright in the back of our truck. And I am very happy with them. They are well made, easy to install and even stay secure when going through the car wash. I highly recommend them.
by: Darin07/17/2018
The 201 bike holder is top quality. It is built strong, with metal components. After testing my first one, I did not hesitate to buy another for my wife's bike. Installation takes about 5 minutes and will remain where you put it. To secure them, simply run a cable through some loops. I recommend this solution for those cyclists who don't want to drill holes in their truck beds.
BTW, shipping was fast!
by: Jim S06/03/2018
2002 Mazda B Series Pickup
These clamps are beefier than expected, easy to install, and hold bike very firmly in place. One drawback is that with my bike and truck size, the hold down strap on the seat bar hits where the derailleur is clamped to the bar. So I had to raise the RT201 with a small wood block.
by: Donnie 06/07/2023
2007 Ford F-150
I just installed the truck bed bike racks in my
Ford F-150. They were easy to install, and appear
to be very well made, and hold the bike very tight. I may order another set for the other side of the
truck bed.
by: Tom 06/29/2023
Bike rack works great for securing to the pickup truck bed side. We secure one bike to each side and still leaves room for more gear in the middle of the truck bed.
by: Rocky06/09/2022
2008 Toyota Tundra
High build quality but the the straps are too short for a mountain bike. This Prevents where you can attach it to the bike. This product would be 5 stars if the strap were an inch longer.
by: Ed W03/21/2019
2018 Ford F-250 Super Duty
This is my second purchase from etrailer and both have been seamless. Great communication, pkg arrives in its' original box expertly wrapped inside a shipping box. Product arrived as claimed and is more heavy duty than I'd have thought. etrailer pricing is excellent and less than other online sites! Easy install. Most difficult part of the install was finding the "voids" in the 2018 F250 bedside allowing the handle to tighten/loosen w/o rubbing the bedside. Still only took about 15 min. Great product from a reputable distributor-highly recommend both!
by: Ron 02/07/2024
Great items
25
178
Show More Reviews
See what our Experts say about this Inno Truck Bed Bike Racks
- Recommended Truck Bed Bike Rack for Fat Tire BikeWe do have an option for you, though installing the RockyMounts TomaHawk Roof Bike Rack for Fat Bikes # RKY1222 in a truck bed is not recommended. Not only would it void the warranty but it may damage the rack and which could lead to it not properly securing your bikes. Instead, I recommend checking out the Inno Velo Gripper Bike Carrier # INRT201 because it will carry your fat tire bike with the wheels on, and easily clamps to most truck bed side rails. This will secure the bike by the...
view full answer... - Best Truck Bed Bike Rack For 2020 Chevy Colorado I recommend 2 sets of the Inno Velo Gripper Bike Rack for Truck Beds - Clamp On part # INRT201 for the bed of the 2020 Chevy Colorado. The Inno Gripper does not require cutting the bed liner in the new truck (if the truck has a bed liner) like with other truck bed bike rack options. It also comes with protective plates for the top of your bed rails to protect the paint. The Inno grips the bikes by their frame so you will not have to worry about taking the front wheel off every time you...
view full answer...
- Fitment and Compatibility of Inno Velo Gripper Bike Rack for Truck Beds with Bed CapSince not every bike has the same standard length or shape handlebars the best thing to do to see if it will clear your cap is to measure. The length of the adjustable rod to the cradle is 7-1/2 inches. The rotating rods also allow you to adjust the amount of space between your bike frame and the side of your truck bed. That way, you can position your bike close enough to the side of your truck bed to save space but not so close that your bike and truck bed make contact. Best thing to...
view full answer...
- Truck Bed Bike Rack for Ariel Rider D Class E-BikeThe Inno Velo Gripper # INRT201 would work great to secure your Ariel Rider D Class e bike in the bed of your truck as it's compatible with fat tire bikes. This is a clamp on style rack that fits to bed rails without tracks/channels. If you have a cargo management system in your truck bed that has channels or tracks we have the channel mount version part # INRT202. These racks attach to the bike frame down tube and provide a secure attachment in the truck bed. We've had customer use...
view full answer...
- INNO Truck Bed Bike Rack Recommendation for 2003 Ford Ranger and How to Lock BikesFor your 2003 Ford Ranger the correct fitting truck bed bike rack by Inno is the part # INRT201. This will fit the bed style of your vehicle well. There are D-rings built into this rack that allows you to route a cable lock through it and the bikes with a cable lock like part # e98891.
view full answer... - Truck Bed Bike Carrier For Single Bike TransportThe Inno Velo Gripper Bike Rack for Truck Beds - Clamp On # INRT201 or C-channel Mount # INRT202 come with two clamps. One for the front fork and one for the rear support tube. I've attached a video review to assist.
view full answer... - Will Inno Velo Gripper Bike Rack Fit 2024 Toyota Tacoma SR5The Inno Velo Gripper Bike Rack for Truck Beds # INRT202 will fit your 2024 Toyota Tundra SR5 with the Cargo Management rails. Inno only has two versions of this bike rack. This one that mounts in the C-channels and the # INRT201 which clamps on. There is no adapter available.
view full answer... - Bike Rack Solution for Truck Bed of 2019 GMC Canyon with Tonneau CoverThe Inno Velo Gripper Bike Rack # INRT201 that you referenced can't install with a tonneau cover also installed. The rails of the cover would prevent this from being able to install. What you could use is the Saris Traps Fork-Block 3 Bike Rack # SATRK34-BLK3 attached to the floor of your truck bed for a way to carry up to 3 bikes.
view full answer... - Does the Inno Velo Gripper Bike Rack # INRT201 Fit a 2017 Toyota TacomaYes, the Inno Velo Gripper Bike Rack # INRT201 is compatible with your 2017 Toyota Tacoma as long as it doesn't have the Cargo Management Rails. If your Tacoma does have the Cargo Management Rails you will want to use part # INRT202 instead. This is the exact same trunk bed bike rack it just installs in a slightly different manner. If you would like to add some security to your bike rack then I also recommend installing the Cable Lock # e98891.
view full answer... - Least Expensive Way to Carry Two 75 Lb Electric Bikes on 2016 Ram 1500I have a suggestion for you, but unfortunately, we're not going to have a hitch mounted bike rack for electric bikes that's going to fit into your budget. Most of our e-bike racks max out at 60 lbs per bike, so your least expensive options are going to be either the Swagman E-Spec # S94FR, with a capacity of 70 lbs per bike, or the Hollywood Racks Sport Rider SE # HLY74FR, with a capacity of 80 lbs per bike -- both over budget. If you're able to utilize your truck bed to carry your e-bikes,...
view full answer...
- Dimensions of Clamp and Mounting Plate for Inno Velo Gripper Bike Rack I went out to our warehouse to take a few measurements on both the clamp and mounting plate for the Inno Velo Gripper Bike Rack # INRT201. The black plate measures 4 inches long and 2-3/8 inches wide with a small lip that measures 1 inch wide. The bed rail clamp has inside dimensions of 2-13/16 inches tall and 1-5/8 inches wide. Its overall dimensions are 3-1/2 inches tall and 2 inches wide. I have attached a couple images to assist. If you need some additional measurements please...
view full answer...
- Carrying Bikes with 15mm Axles in the Bed of a TruckOne simple option is the Topline rack # UG2500 which basically holds the bikes at the frame. It is also expandable if you wanted to carry more bikes. I have linked a video review of this rack for you. Another option for a single bike is the Inno Velo Gripper # INRT201 which also holds the bike at the frame. Its a simple set up but if you are carrying 2 bikes you would need to order 2 of them. I have linked a video of the Velo Gripper as well. If you have a Chevrolet, GMC, or Toyota truck...
view full answer... - Will Inno Truck Bed Bike Carrier Fit 2011 Chevrolet Silverado 1500 with Roll-Up Tonneau CoverThe Inno Velo Gripper part # INRT201 installs where the tonneau cover rails are installed so it will not fit with the rails. You could still carry bikes in the bed of your Silverado using the Thule GateMate Pro Tailgate Pad for Full-Size Trucks - Up to 8 Bikes - 60" Wide Item # TH824PRO.
view full answer... - Can Front Bike Wheel be Turned 45 Degrees and Still Work with Inno Velo Gripper in Ford F-150The Inno Velo Gripper # INRT201 will still work with the bike front wheel turned as long as the Gripper has something to grab onto. If it was just one Gripper holding the whole bike then there might be a stability problem. But there are 2 included so one can grab at the front of the bike and the other at the rear so it is stable.
view full answer... - Does Inno Velo Gripper Bike Rack Fit 2017 Chevy ColoradoYes, the Inno Velo Gripper Bike Rack # INRT201 will indeed fit your 2017 Chevy Colorado.
view full answer...
- Will Thule Insta-Gater Pro Truck Bed Bike Rack Work On a Bike with Fenders The Thule Insta-Gater Pro Truck Bed Bike Rack part # TH93VR shouldn't be used on a bike with fenders as you'd have to place the hook before the fender and that could create a weak hold. That said, you can secure the rack to either the front or rear wheel so you might still be able to secure the bike if there's only a fender on the front or rear. If there are fenders over the front and rear wheels then I recommend going with a different option like the Inno Velo Gripper Bike Rack for Truck...
view full answer... - Can Inno Truck Bed Bike Rack # INRT201 Attach to Wider Mountain Bike FrameThe Inno Velo Gripper Bike Rack # INRT201 can grab bike frames that are up to 1.03 inches in diameter. For mountain bikes that have wider frames you can instead attach the rack to the seat post. Or you could use a bike frame adapter bar part # UB01. The picture I attached shows the rack grabbing a seat post.
view full answer...
- Recommended Pickup Truck Bike Rack for 2014 GMC Sierra 1500 with Drop-In Plastic Bed LinerInno recommends removing a plastic bed liner if it interferes with installation of their clamp-on Velo Gripper Bike Rack for Truck Beds # INRT201. If your liner does not come up and over the tops of the bed rails (if it only extends up vertically but does not cover the tops of the rails) then it could be compatible but you might still need to trim it slightly. A better bike rack option confirmed to work with plastic bed liners is the Swagman # S64702 which includes the mounting hardware...
view full answer... - Carrying An E-Bike And An E-Trike On A 2019 Forest River Sunriver I may be able to provide you with some options to carry your bike and trike, but I will need some more information from you. I need the make and models of your bike and trike. Most importantly, I need the weights of your e-bike and trike and the wheelbase of your trike and its length. The Swagman 4 Bike Carrier RV Mounted Bike Rack, part # S80600, you attached to your question will not work for this application. Each of your bikes will weigh more than 30 lbs.
view full answer... - Will the Inno Velo Gripper Work with my 2012 Honda RidgelineYes the Inno Velo Gripper Bike Rack for Truck Beds part # INRT201 will work for the 2012 Honda Ridgeline. I have linked a video showing the attachment method for you to check out.
view full answer... - Will The Inno Velo Gripper Bike Rack # INRT201 Fit a 2023 Hyundai Santa CruzCurrently the Inno Velo Gripper Bike Rack # INRT201 has never been tested on a 2023 Hyundai Santa Cruz. I took some measurements of the clamp you can use to check and see if it will fit on your bed rails(see image below). If the clamp will fit your bed side rails you will need to check the length of the bike you intend to haul with the length of your bed with the extender installed. As bikes have several different lengths depending on the type and size some will fit while others may be too long.
view full answer... - How to Lock Bike to Truck Using Inno Velo Gripper Bike RackIf you wanted to use the Inno Velo Gripper Bike Rack # INRT201 and then lock the bike to the truck your best option would be a cable lock like part # e98891. You would need to route the cable through the frame of your bike and then through either a stake pocket or a tie down anchor in the bed of the truck.
view full answer... - Can the Inno Velo Gripper Bike Rack for Truck Beds Be Used for Two BikesThe Inno Velo Gripper Bike Rack for Truck Beds part # INRT201 is designed to hold a single bike. It requires two clamps for one bike for proper support. If you need to carry two bikes, you can purchase another set of clamps and use them on the other side of the bed but I don't recommend using one set of clamps for two bike i.e. one clamp per bike.
view full answer... - Bike Rack Options for Chevy Colorado with Tonneau CoverI do have an option for you but the Inno Velo Gripper Bike Rack for Truck Beds part # INRT201 won't work with a tonneau cover and there is not a version of this that will. The best option we have for trucks with a tonneau cover is the Thule Insta-Gater Pro Truck Bed Bike Rack part # TH93VR which attaches to the tailgate. If you need a more cost effective option, the Swagman Tailwhip Tailgate Pad part # S64761 works great as well and it also attaches to the tailgate.
view full answer...
Do you have a question about this Truck Bed Bike Rack?
Info for this part was:
Video by:
Zack K
Video by:
Andrew K
Video by:
Joshua S
Video by:
Thomas T
Video by:
Charles A
Written by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Updated by:
Lisa S
Test Fit:
Randy B
Test Fit:
Keith V
Test Fit:
Aidan B
Test Fit:
Robert O
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
7/29/2023
Still working well, weve had no issues on multiple long distance trips.