T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118381
Retail:$49.26
Our Price: $20.94
You Save: 57%
Confirmed to Fit
2000 Dodge Ram Pickup
Pickup with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (161)
- Q & A (0)
- Photos
2000 Dodge Ram Pickup - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Dodge Ram Pickup using this custom wiring harness. T-One connector plugs directly into existing factory 7-way - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily to your existing 7-way - no cutting or splicing of wires
- Locate connection points behind rear bumper
- Plug in T-connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the rear bumper, on the driver's side.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118381 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118381
Average Customer Rating: 4.6 out of 5 stars (161 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle using this custom wiring harness. T-One connector plugs directly into existing factory 7-way - no cutting, splicing or tapping required.by: Bryan 07/17/2022
Right part, easy to install, straight forward harness.
by: Dan 11/06/2023
2001 Dodge Ram Pickup
Great product,easy installation!
by: Steve V04/20/2019
Super easy installation, 30 mins (including tool take out and put away). Exact fit, with ALL necessary parts. etrailer has exceptional customer service and offers exact fit parts at great prices!
by: 09/08/2023
We have not received this yet? Is it being shipped separately?
Katrina D.
9/14/2023
I do see that your order was split, and the package containing 118381 was scheduled to arrive at your place on 9/11. Have you received this package?
Faye C.
9/18/2023
No. We did not receive.
Katrina D.
9/18/2023
Ugh, it looks like the shipping has been updated via the tracking number and you should be receiving the order today at some point [9-18]. Please let me know if you do not receive it this evening. I would also love to hear your feedback on your experience once you actually do receive the item. I am sorry for the inconvenience this has caused you.
by: Michael08/01/2022
did not fit I had to splice in 14" of wire so it could reach the two tail lights
and this was the second one I purchased the first one did not have the correct connectors
Brooke M.
8/9/2022
This part is meant for Jeeps that have the factory tow package. I am wondering if that is the issue here. If your jeep doesnt have that then you would need part # 118425.
by: Gary H.06/03/2013
2000 Dodge Dakota
I recently recieved my tow hitch for a 2000 Dodge Dakota. The part arrived promptly and in excelent condition. I was very pleased with the quality of this hitch by Curt. It was very stout and had great welds. I haven't had a chance to mount the unit yet but the measurements look to be right on. etrailer.com has a new customer.
Gary H.
6/27/2014
Everything worked out great. Thanks for the check in. Have a great summer. Regards, Gary H.
by: henry m08/10/2017
2005 Jeep Grand Cherokee
curt hitch i pefer to use because never have any problems always easy to install and get help when i need it however i ordered the wrong trailer harness for the jeep 2005 grand cherokee it does not have factory installed tow package can i exchange it please let me know what i have to do thank you henry m
Laura E.
8/19/2017
Henry, you can simply call us at 1-800-298-8924. We would love to help. For an explanation of our return policy, please see this helpful link:
Helpful Links
by: Barry B10/25/2017
2004 Jeep Grand Cherokee
The kit was extremely easy to install and fits like a fine glove. So easy in fact that the factory could not have done better looking job. Works great although I rarely use my trailer but I know when I do, I can rest assured that the wiring will not be a problem as it used to be.
Barry B.
10/25/2018
have since started driving a different vehicle. My jeep bit the dust. I liked the harness and it always worked fine but I didnt get to use it too long. I do remember how easy and well thought out the installation process was. I do keep a link to your website and have turned on others to it. Sometimes it was already too late but now they know its there. Ill definitely keep you guys in mind in the future
by: Michael09/19/2018
2005 Jeep Liberty
The product was everything that was advertised it arrived in perfect condition I guess I just misunderstood what I needed and inevitably ordered the wrong part my 05 Jeep Liberty did not come with a 7-way so I need a different harness to be able to hook up my trailer should have called customer service first
Mike L.
9/20/2018
If your Liberty didnt have the factory 7-way, I would recommend the # 118524 Tekonsha powered taillight converter.
by: Lisa05/28/2019
This product was what was recommended by your site as the proper wiring harness and it IS NOT compatible with my vehicle. Our family’s vacation has already been pushed back by 2 days dealing with this situation and we are still working on finding a local solution!
Mike L.
5/29/2019
This wiring harness is only compatible if your Freightliner Sprinter has the factory equipped 7-way trailer connector, as we state in our product fit guide. If your Sprinter does NOT have the factory 7-way, youd need part # 118650 instead.
Helpful Links
by: Jeffrey05/20/2019
2002 Jeep Grand Cherokee
Fit just like advertised. They have excellent customer service. Videos and pictures were a great help.
by: Bobber Gibbs, Barrie, Ontario, Canada07/17/2021
etrailer received, filled, packaged and shipped my small order (wiring harness) within an hour, then turned it over to the US Post Office.... Within 2 days, it crossed the state line from Missouri into Illinois. A few days later, it was received in Chicago and should have arrived in Canada in short order.... Instead, tracking my order a week later revealed that it was resting comfortably in Miami Florida. A call to etrailer and Carol soon straightened things out. It eventually found its way to me and I am quite pleased with the service from etrailer. The Post Office? Well, you know..... Bobber.
by: John M09/18/2017
The T-wire harness was great, installed well and works fine.
The Seat covers are great as well, durable and easy to install, will consider rear seat covers if available?
The stabilizer bracket would not work with my platform rig, but looked of good quality and I will find a use for it.
by: Josh O10/10/2014
2006 Mercedes-Benz Sprinter
Bought this for a 2006 Dodge Sprinter didn't realize it would not work on a Sprinter with out towing package. Had to buy different kit and splice the wires in (not fun) make sure you have the right kit if you are working on a Sprinter. On a vehicle with the right harness it works great just plug in and go.
by: Gary02/20/2020
Dodge Durango
Thanks to etrailer's excellent customer service, I was FINALLY able to order the correct wiring harness for my '01 Dodge Durango. There are many variables due to several Durango models, and this was the correct one. Has worked flawlessly since installation.
by: Brook & Deb06/06/2023
perfect fit fast install!!
by: Jack L10/02/2019
Easy to install, hidden when not in use, doesn't reduce ground clearance and trouble free. Local hitch installer quoted me $350 and said it would take 3" off my clearance. I saved over $200 and got a better setup.
by: Jeremey03/24/2022
Super easy to install and worked right away, no additional fuses or lights necessary. Videos were easy to find on [online] and very easy to follow. Would recommend this to anybody. Mine did not come with the double sided tape, but I had some lying around so no worries.
by: JAA235104/03/2022
It would have been very easy to install but my truck did not have the quick disconnect behind the bumper.
Jenny N.
4/14/2022
You mentioned that you were not able to find the connector and I wanted to ask if you were adding on the 4 flat or replacing it.
by: CHARLIE G.06/13/2017
2000 Dodge Dakota
I was in a hurry and I bought the wrong wiring harness. I have ordered the right wiring harness and it is on the way. My truck does not have the factory trailer connections for the wiring harness that I ordered.
by: DAN M.03/25/2017
2007 Dodge Dakota
didn't even install it .... my Dakota had no hook up ... had to hardwire a connector .... waste of $15 , not even worth my time returning it .... I did buy a hitch that I am using though ... should have bought a chevy
by: Carter 07/01/2022
I've had this on my truck for a year to pull my little 5x8 utility trailer for work. It's worked every time so far and haven't had any issues with it. So far so good. Oh, and it only took about 20 minutes to install of you're into that kind of thing.
by: Linda05/29/2017
website was very helpful and easy to use. Told me exactly what to order and how to install, Items arrived and installed exactly like they said they would. Saved us $300 dollars and have exactly the same hitch we were quoted at several different trailer install places. Thank you etrailer!!!
by: Greg10/02/2017
2007 Jeep Liberty
I watched a video of theirs on Youtube which linked to the correct part and I bought what the video linked to, assuming it was the one shown in the video (without the factory 7-way). They sold me the one that uses the factory 7-way (which I don't have) and when I called asking to exchange it for the right one, they said it wasn't possible. They said they'd take it on refund, but are charging me for return shipping, and considering it's such a lightweight and cheap part to ship (and their website's mistake), I'm losing a significant portion of the money I spent on it.
by: Ed01/22/2022
Wrong product .. reordered correct one .. said this was 4 pin connection, but requires vehicle to be equipped with 7 pin connection from factory. Guess you have to read the fine print
Jenny N.
1/24/2022
For a 2004 Dodge Dakota with a factory seven way this harness adds a 4 flat. For a 2004 Dodge Dakota that did not come with a factory harness part # 118323 would be a fit.
25
161
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Wiring Options for Flat Towing a 2002 Jeep Grand Cherokee Behind a 1986 Gruman/Olsen Delivery VanThe T-One Vehicle Wiring Harness, # 118381, that you have referenced cannot be used in a reverse type of application like you are describing. But there are numerous lighting options for flat towing a vehicle that will work for you. The right wiring application for you will depend on several factors. There are basically two types of wiring solutions for flat towing. Permanent solutions and temporary solutions. If you plan on towing the 2002 Jeep Grand Cherokee often, you would benefit from...
view full answer... - Replacing a Broken Wiring Harness on a 2007 Dodge Ram PickupIf the wiring is damaged, it is always recommended said wiring be replaced or repaired. That being said, I am not aware of a specific part to remedy this without replacing the whole part. You could use Deka Cable Ties like # DW05727-25 as a temporary solution, however. If the vehicle is a 2007 Dodge Ram Pickup, you would use the Pollak 7 Way # HM40975-11933, or the Tekonsha T-One # 118381 if you have a 4 Flat. If the trailer needs the replacement, the Wesbar 4-Pole connector # W787268...
view full answer... - Brake Controller Install Kit for a 2000 Dodge Durango with 4-WayYou will need to start with a 4-way (if you do not have one). For that you would want the # 118381. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
view full answer... - How to Install a Brake Controller in a 2005 Jeep LibertyTo install a brake controller in your 2006 Jeep Liberty with a factory 7-Way you will need to hardwire the wires from the back of the brake controller to the vehicle. This vehicle does not have a brake controller port that you can plug the brake controller into. I am including a link to the installation instructions for the Prodigy P2 brake controller # 90885. This is our most popular brake controller because of how easy it is to set up and how well it works. The four wires on the back...
view full answer... - Replacing 1-1/4-Inch Factory Hitch With 2-Inch Class III Hitch on 2006 Jeep Grand CherokeeThere is only one location on any given vehicle's frame to properly attach a hitch receiver. The location on your 2006 Jeep Grand Cherokee where the existing 1-1/4-inch Class II hitch is installed is the same place that Class III hitch # 75338 will mount. This 2-inch hitch installs without drilling using the included hardware and will sit in essentially the same spot as the current hitch tube. I have linked an installation video for you. If you need a 4-pole trailer wiring harness for...
view full answer... - Recommended Hitch and Wiring for 2004 Jeep Grand CherokeeThe Curt # C13900 is a multi-fit hitch that is designed to fit on a variety of vehicles, but it would require some modification and drilling to install. Instead, I recommend using the Curt # 13051, which is a confirmed fit on your 2004 Jeep Grand Cherokee and will install without any drilling or modifications. If you're going to be towing with this hitch and don't have the towing package, you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55369...
view full answer... - Recommended Trailer Wiring for 2007 Jeep LibertyFor your 2007 Jeep Liberty, many people have a receiver for a bike rack or cargo carrier and have not added the trailer wiring which sounds like what you are finding. If your vehicle has the factory tow package, the harness you will need to connect to is found under the vehicle in the center behind your hitch receiver. If you have that tow package then you can simply use the Tekonsha # 118381 for a 4-Way or # 20135 for a 7-way. You may still need to add # 5506 on some models for 12v...
view full answer... - How to Wire Draw-Tite Activator 5504 Brake Controller in 2002 Dodge VanYour 2002 Dodge van does not have a connection port under the dash for direct connection of a trailer brake controller like the Draw-Tite Activator # 5100 so the installation needs to be hard wired. Installing the Activator # 5504 in your van requires a pigtail lead # 20127, a basic 4-pole trailer harness like # 118381 (if you have a factory 7-way) or # 18252 (without factory 7-way) along with brake controller Installation Kit # ETBC7. These kits have all of the parts needed to compete...
view full answer...
- Brake Controller Recommendation for a 2005 Dodge DurangoYou will need to start with a 4-way (if you do not have one). For that you would want the # 118381. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake...
view full answer... - Can the Pins of a 4-Way be Moved AroundI have a solution for you, but the pins of the # 118381 cannot be relocated in the 4-way, you could however just cut the wires and splice them to different wires to move the circuits around. Sounds like you only really need a 4-way plug and lead instead of the # 18252, for that you would want the # A35W42B for a 6 foot long harness.
view full answer... - Will a 2007 Dodge Ram and 2005 Ford Trailer Connectors Match to Tow the Same TrailerWiring the trailer to match the pin out on the 2007 Dodge Ram should allow it to work with the 2005 Ford as well. The reason is that vehicles generally have the same pin out on the trailer connector, the two most common being a 4-Way flat and 7-Way blade style. To make sure everything matches up and just to be on the safe side you can use a circuit tester like # 3808 to test the functions on the vehicle side connectors. On the trailer side you can either trace each wire back to determine...
view full answer... - Troubleshooting Running Light Circuit Not Functioning on a 2003 Dodge Ram Trailer WiringFirst thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue. Make sure that the trailer side connector are clean...
view full answer... - Recommendation for a Class V Trailer Hitch that Will Fit a 2007 Dodge Ram with Factory Trailer HitchWe do have several trailer hitches that are designed to fit beneath the factory trailer hitch on a 2007 Dodge Ram. You can use Curt Trailer Hitch # C15704 if you want a 2-1/2 inch trailer hitch receiver. Hitch # C15409 has a 2 inch receiver. The recommended ball mount for a 2-1/2 inch hitch is # RP45323, and you can use pin and clip # 37201065. For a ball you can use # A-90 (2 inch diameter) or # 19286 (2-5/16 inch diameter). For trailer wiring, if your truck has a tow package with a 7-Way...
view full answer... - Parts Needed to Tow Trailer with 2007 Jeep Grand Cherokee Laredo The best hitch for towing a trailer with your 2007 Jeep Grand Cherokee Laredo is the Draw Tite part # 75338 because it has the highest towing capacities at 5,000 lb trailer weight and 750 lb tongue weight. It also installs very easily too. Check out the install video I attached for this hitch on a 2006 Grand Cherokee similar to yours. If you need a trailer wiring connector the 4-way kit part # 118381 is very easy to install on your vehicle. Since you plan on doing some towing you might...
view full answer... - Wiring 2007 Dodge Ram 3500 For Installation of Flat Bed We don't offer a direct part, but I know how you could fabricate a pigtail. You'd need part # 118381 that would plug inline with the harness that plugs into the rear of the 7-way. You could simply cut the 4-pole off and wire the yellow wire to the left turn, the green wire to the right turn, ground the white wire and run the brown wire to the running light and jumper it over to the running light on the other side. This set up would provide you with a quick disconnect. You'd need to wire...
view full answer... - How to Pick Out Trailer Wiring for 2001 Jeep Grand CherokeeSounds like you are trying to determine if your 2001 Jeep Grand Cherokee has the factory tow package so you can pick out the correct trailer wiring harness. Easiest way to tell would be to check to see if the vehicle has a factory trailer hitch and wiring installed on it currently. If so, then you'd have the tow package and the kit you'd want is the # 118381 which would plug inline with the 7-way you have to give you a 4-way. If instead you do not have either a hitch or wiring, you'd need...
view full answer... - How Do I Install a 5-way Flat Connector at the Back of my 2006 Jeep Commander to Tow my BoatIn order to have a 5 pin flat trailer connection you will first need to install the Tow Ready Custom Fit Vehicle Wiring, part # 118381, that you referenced. I attached installation instructions and a link to an installation video for this product below for you to check out also. The next thing you will need is an Adapter 4 Pole to 5 Pole Trailer Wiring Adapter, part # 20036. This adapter will plug into the 4-way that you just installed with the # 118381, and then you can run the blue wire...
view full answer... - Trailer Hitch, Ball Mount, Ball, and Trailer Wiring Recommendations for a 2008 Dodge Ram V6For your 2008 Dodge Ram, the Curt Trailer Hitch, # 13333, that you have referenced would be a good choice. This hitch mounts to the bumper support beam and the bumper. It has a gross trailer weight capacity of 6,000 pounds and a tongue weight capacity of 600 pounds. I have included a link to the installation instructions for reference. To complete your towing set up, the recommended ball mount is # 2753 with pin and clip # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 19247 (2...
view full answer... - Recommendation for a Trailer Hitch that Bolts to Bumper Support on a 2009 Dodge Ram 1500You are correct, your 2009 Dodge Ram 1500 does have a bumper support at the back that attaches to each frame rail with a support in the center that rests under the step bumper so you can place a hitch ball. The Curt Trailer Hitch, # 13333, that you have referenced attaches to the bumper support and uses the ball hole as an attachment point also, so it is compatible with your truck. The hitch can be used with weight distribution. I have included a link to the installation details for the...
view full answer... - Recommended Trailer Hitch For 2008 Dodge Sprinter 3500The trailer hitch I recommend for your 2008 Sprinter is the Curt Adjustable Hitch, part # 13703. This trailer hitch will work with frames from 22 to 72 inches and the hitch has a 2-inch receiver opening. The hitch can either be bolted or welded on and will work with box frame, C-channel frame, or I-beam frames. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with...
view full answer... - Do Brake Controllers Include Custom Wiring Adapter for InstallationBrake controllers come with a basic pigtail wiring harness for hardwire installation, or they can come with a connector made to join with a vehicle-specific wiring adapter on vehicles that have a specific port for brake controllers. Since your 2004 Jeep Grand Cherokee does NOT have such a port under the dash any brake controller you install will be a hardwired installation. If the GC has no factory trailer socket at the rear then brake controller installation will require our all-inclusive...
view full answer... - Trailer Hitch, Ball Mount, Ball, and Wiring for a Jeep Grand Cherokee Rocky Mountain EditionI spoke with my contact at Draw-Tite about Trailer Hitch # 36362. He stated that there are no known fit problems with this hitch and the Jeep Grand Cherokee Rocky Mountain Edition. He also added that they have not received any calls about the hitch not fitting. So the 36362 hitch will fit your Grand Cherokee. I have included a link to the installation details below. The hitch comes with the necessary hardware for installation. If you plan on doing some towing the recommended ball mount...
view full answer... - Will the Curt Class III 2 Inch Hitch # 13333 Fit a 2006 Dodge Ram 1500 SLT Big HornYes, the Curt Class III 2 Inch Hitch, part # 13333, will fit your 2006 Dodge Ram 1500 SLT Big Horn as long as you do not already have a factory installed hitch on your vehicle. This hitch will not fit on vehicles with a factory installed hitch. Some other items you may need to complete your towing setup are listed below. Draw-Tite Ball Mount, part # 2753 Pin And Clip, part # PC3 Tow Ready 2 Inch Hitch Ball, part # 19247, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19260 If your Dodge...
view full answer... - How to Wire a Itasca Navicon Motorhome with Valley 7-Way Wiring for Flat Towing a JeepPart # 118381 does not have a converter built in. Parts are tricky to select when dealing with motorhomes built off of production chassis. Itasca may have had a certain number of chassis built by Dodge with different wiring for their purposes. The parts we carry like 118381 are designed to be used with the production models sold at dealerships. Fotrunately for you, Itasca teamed up with Valley and have provided you with a 7-Way connector and what ever converting needed to be done has already...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bryan
7/18/2023
A year out still 5 stars. Its common on these 4 pin connectors to have the plastic rub off next to the single exposed pin, this is no different. Still functional and stays connected throughout use.