What Is The Back Spacing On The Dexstar 14 x 5-1/2 Inch Wheel # AM20304
Published 10/12/2022
Question:
What is the back spacing? And can I use this on a 72 Plymouth Valiant as a factory replacement?
asked by: Richard F
0
Expert Reply:
Per our Dexstar contact The Dexstar 14 x 5-1/2 Inch Wheel # AM20304 has a back spacing between the range of 3.32 inches to 3.44 inches, these will work on your 72 Plymouth Valiant if the measurement lines up.
The wheel has a 5 on 4-1/2 inch bolt pattern and has a weight capacity of 2,200 pounds. It has a black powder coat finish that is over a e-coated primer.
I attached a review video link below.
expert reply by:
Noah E
0
Product Page this Question was Asked From
Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black
- Trailer Tires and Wheels
- Wheel Only
- 14 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can Trailer Wheels be Used on Vehicle
- Q&A: Can The Dexstar Conventional Steel Wheel # AM20304 Be Used On A 1963 Ford Fairlane
- Q&A: Will B&W Continuum Weight Distribution System Work with Center Frame Piece on Trailer Tongue
- Q&A: Tie Down High-Mount Spare Tire Mount
- Q&A: Are Powder Coat Trailer Wheels Good for a Saltwater Boat Trailer ST205/75R14
- Q&A: What Is The Shoe In A Schwintek Slide Out System And What Does It Do
- Q&A: How To Upgrade to a 5,200 Lb Axles On a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Trailer Tire Sizing