Gen-Y Hitch Aluminum Loading Ramp Set - 7' Long x 14" Wide - 6,000 lbs

See what our Experts say about this Gen-Y Hitch Car Ramps

• What Kind of Trailer Ramps Are There
  We do! There are a variety of trailer ramp styles and needs out there so we have quite a selection to choose from. For example, we have the 60" x 14-1/2" Aluminum Car Hauler Ramp Set # 288-07502 rated for 6,000 lbs, the 84" x 14" Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R84 rated for 6,000 lbs, or the 90" x 18" Arched Loading Ramp Set # 288-07432-2 rated for 3,000 lbs. I'm attaching our selection of ramps for you to filter through, but if you could let me know how you're planning...
  view full answer...
• US Manufactured Loading Ramps
  The Stallion # 288-07432-2 folding cargo ramps are manufactured in China. If you'd prefer a US made alternative, I'd recommend the Gen-Y # 325-GH-R84 84 inch long aluminum loading ramps. If you click the provided link, you can see a product demonstration video for the Gen-Y ramps.
  view full answer...
• Can the Gen-Y Hitch Aluminum Loading Ramps Be Used On Car Hauler Trailers
  The Gen-Y Hitch Aluminum Loading Ramp Sets like part # 325-GH-R84 can be used on car hauler trailers with multiple cars per Gen-Y. I have attached the full list of options below.
  view full answer...
• How Large is the Gap Between the Hook and the Ramp of the Gen-Y # 325-GH-R84?
  Yes. You will be able to use the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs # 325-GH-R84 with your 1-3/4" lip. Since the gap between the hook and the ramp is 2 inches, you have enough room. I went ahead and attached a photo of this dimension for your convenience. Also, I confirmed that this ramp has a maximum deck height of 36 inches, so your 34-inch height is not a problem. You also have plenty of weight capacity on the ramp for your 3000-pound hobby tractor.
  view full answer...
  
• Recommended Trailer Deck Height for Gen-Y 325-GH-R84 84 Aluminum Car Ramp
  According to Gen-Y, their # 325-GH-R84 84 inch aluminum loading ramp would be perfect for your 24 inch deck height. I've linked to a product demonstration video featuring the # 325-GH-R84 84 ramp.
  view full answer...
• Recommended Ramps to Reduce Approach Angle to Load BMW Z3 in Toy Hauler
  I do have a solution, but the # 325-GH-R84 are not designed to work this way. Since they are designed to hook over the back edge of a trailer, you would drop off of the end where the hooks are onto the ramp of your 5th wheel. It would not be a smooth transition and depending on your clearance you might cause damage. They may also pop up into your Z3 when you drive off the end of the ramps. Instead, I recommend the Race Ramps Trailer Loading Assist Ramps # RR-TR-5. These have cutouts so...
  view full answer...
• How Wide is Gen-Y Ramp 325-GH-R84 Hook
  The hook portion of the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R84 that gets set on to the rear of the trailer is 14 inches in width. The depth of the hook, or how wide the opening of it is 2 inches.
  view full answer...
  
• Are There Trailer Ramps for Loading Cars That Keep Front End Up for Door Clearance
  We have options for loading ramps for a trailer to load up your vehicle, but none that are 10 inches or keep the front end up for door clearance when towing. Each of the available ramps hook onto the trailer and need to be removed after use; they are different lengths, widths, and capacities so you can get the one that will work for your vehicle. - 72" Long x 14" Wide - 6,000 lbs: Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R72 - 84" Long x 14" Wide - 6,000 lbs: Gen-Y Hitch Aluminum...
  view full answer...
• How Thick Is the Gen-Y Hitch Aluminum Loading Ramp Set GH-R84
  I spoke with Gen-Y about the Gen-Y Hitch Aluminum Loading Ramp Set part # 325-GH-R84 and was informed that they were 2-1/4" thick when measuring from the bottom of the rail to the top traction bar. The representative went out and measured the loading ramps for you just to be sure as well since there seems to be conflicting reports.
  view full answer...
• Why is there a Height Limit on Aluminum Car Hauler Ramp Set 288-07502
  The height restriction on ramp set # 288-07502 has to do with the distribution of the weight, ability for tires to grip, and clearance between the tops of the ramps and the vehicle rolling up them. The shorter the ramp the more severe the angle will be as the loading height increases. You could go with longer (and tougher) ramps using the Gen-Y options such as # 325-GH-R72, # 325-GH-R84, or # 325-GH-R96. These ramps will last pretty much forever since Gen-Y is known for making products...
  view full answer...
• Recommended Flat Loading Ramps
  Yes, the Gen-Y Hitch Aluminum Loading Ramp Set part # 325-GH-R84 is a great option for a set of flat loading ramps. They are only 35 lbs each so they will be easy to use and the 84" length combined with 4-1/8" rung spacing should be suitable for pretty much any application.
  view full answer...
• Loading Ramp Recommendation for a 3000-Pound Tractor with 20-Inch Deck Height on Trailer
  For your 3,000-pound compact John Deere tractor, I recommend the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs # 325-GH-R84. Not only does this set provide you with 6,000 pound of maximum weight capacity, it also has a deck height requirement between 15-36 inches tall. This requirement is perfect for your 20-inch deck height. As far as safety, the serrated rungs of the ramps help provide maximum grip for your tractor. As far as the gap between the lip and the...
  view full answer...
  
• Is the Weight Rating for a Set of Loading Ramps Per Axle
  The Gen-Y Hitch Aluminum Loading Ramp Set part # 325-GH-R84 has a 6,000 lb weight capacity which is for one axle. In most cases, both axles will never be on the ramp together so as long as the weight on either axles does not exceed 6,000 lbs then you will be good to go. However, if at any time there is more than 6,000 lbs on one axle you would need to upgrade to the Gen-Y Hitch Aluminum Loading Ramp Set part # 325-GH-R96 which has a 10,000 lb per axle weight capacity. I have attached...
  view full answer...
• Best Ramp That is Easily Stored for Loading a Smart Car onto a Trailer
  I have a solution for you, but the CargoSmart Arched Loading Ramps # 3483070 are going to be about 7" tall at their tallest point when laid flat on the ground. If you don't mind folding up the ramps and storing them in the rear cargo area of your Smart Car, I recommend going with the Arched Landing Ramp Set # 288-07432-2 , which fold up to a size of 45-3/4" long x 18" wide x 6" tall. You'll need to measure the area for yourself, but from what I was able to find from my research, these will...
  view full answer...
• What Do the Ends of the Gen-Y Hitch Aluminum Loading Ramp Set 325-GH-R84 Look Like
  At one point the ends of the Gen-Y Ramps like the part # 325-GH-R84 were different but at this time the ends of the ramp look like what you see in the attached photo.
  view full answer...
  
• Options for Aluminum Loading Ramps
  We have a variety of ATV single ramps, like the Arched Loading Ramp # 288-07432, as well as ramp sets, like the Gen-Y Hitch # 325-GH-R84, that have an aluminum construction. If you can let me know what you're planning on using the ramp for I'd be more than happy to help you figure out which one we can supply you with. I've also attached a link to our aluminum ramp options for you to filter through.
  view full answer...
• Alternate Part Numbers for Gen-Y Hitch Aluminum Loading Ramp Set 325-GH-R84
  The GEN-Y Ramp set part # 325-GH-R84 is also listed as part number GH-16084 or just GH-R84 but I cannot find any GEN-Y part number for just GH-1084.
  view full answer...
• What Does the End of the Gen-Y Hitch Aluminum Loading Ramp Look Like
  I attached a picture that shows what the end of the Gen-Y Hitch Aluminum Loading Ramps # 325-GH-R84 looks like. It's a hook style that grabs the trailer so it doesn't slide off.
  view full answer...
  
• Max Trailer Height for Use with 6' Long Flint Hill Goods Easy Carry Trailer Ramps
  Hey Jerry! The 6' x 14-1/2" Flint Hill Goods Easy Carry Trailer Ramps # FHG23ZR can be used with up to a 16" tall trailer. Anything taller than that and you'll need a long set of ramps like the Gen-Y # 325-GH-R84 that are 7' long and will work with up to a 36" tall trailer.
  view full answer...
• Where Is The CargoSmart S-Curve Loading Ramp 3483086 Made?
  I reached out to my contact at CargoSmart and the CargoSmart S-Curve Loading Ramp # 3483086 you were looking at is made in either India or China. If you would prefer an option that is made here in the USA I recommend the Gen-Y Hitch Aluminum Loading Ramp Set # 325-GH-R84. This includes two ramps with a combined 6000lb capacity and due to them being made out of aluminum they are pretty light weight at 35lbs each. I included videos of the products mentioned for you to take a look at.
  view full answer...
• 6,000 lb Loading Ramp For 18 Inch Trailer Deck Height
  For an 18 inch trailer deck height that has a 6,000 lb capacity there is one option for loading ramps, from Gen-Y: - Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs # 325-GH-R84 The # 325-GH-R84 ramps are for deck heights between 15 and 36 inches, so they are perfect for your 18 inch deck height. The ramps have a total capacity of 6,000 lbs (3,000 lbs per ramp), and their aluminum construction means they won't rust or corrode, and are much lighter than other...
  view full answer...
• Capacity and Length of Loading Ramps
  The Erickson Arched Loading Ramp item # EM07441 you referenced has a 750 lbs capacity. It is sold individually so the pair would combine for a 1,500 lbs capacity. A set of these would be sufficient to load up a 1,300 lbs car. We do have a shorter set they are the Gen-Y Hitch Aluminum Loading Ramp set item # 325-GH-R84. These have a combined 6,000 lbs capacity and are 84" long.
  view full answer...
• Recommended Ramps For Loading A Kubota BX23S into a 16" Tall Trailer
  As the Kubota BX23S weighs 1,570 and the backhoe attachment weighs 607 pounds, your rig will weigh 2,177 pounds (approximately). The combined weight capacity of the Stallion Aluminum Car Hauler Ramp Set # 288-07502 is 6,000 pounds (3,000 per ramp), so it will have absolutely no issues carrying the load. The 16" deck height will actually be the maximum suggested for this ramp set, so it will be a little steep, but definitely manageable. However, if you wanted a little more length to lessen...
  view full answer...

Do you have a question about this Car Ramp?