Video Transcript for Review of Race Ramps Car Ramps - HD Flatbed Tow Ramps - RR75JE

Hi everybody, Andy here with etrailer. Let's take a quick look at these Race Ramps HD flatbed tow ramps. Now with these ramps, you're going to be able to say goodbye to scraping and dragging during vehicle loading. These lightweight ramps give you a gentle 5.2 degree transition from the road to your flatbed, and it's going to make it easy to load low clearance or disabled vehicles without hassle. Now, each ramp is compact and it's a one piece design and it's sold as a pair as you see here. And it's going to be very simple to position these in a way that's going to be perfect for shorter ramp to ground transitions.

The high density EPS foam construction is indeed very lightweight as you can see here, but these are incredibly durable. These are going to be able to hold up to 2,500 pounds per ramp for a total of 5,000 pounds for the pair. And you're not going to have to worry about them flexing. And despite their strength, each ramp weighs about 10 pounds. So moving and storing them is going to be very easy.

I just wanted to kind of give you an overhead look here. Now this does feature a non-slip coating and so it's going to do a great job, that coating is, of keeping these ramps securely in place even around water, automotive fluids or wear from repeated use. And they're built for real world towing. So they're going to be smooth and safe and easy to use every time. I want to give you a close up here from the front just so you have a better look at that texture and that material.

So again, this is going to give you an approach angle of 5.2 degrees. And let me go ahead and give you some measurements here. Just some rough ones here. Looking at the overall length, hopefully you can see that there. We're sitting right at 42 inches long and then the width right at 10 inches.

And these are going to work with a maximum tire width of eight inches. And then the overall height here at the tallest point, about four and a half inches. And when we're talking about the bed notch length, it's almost five inches. And then the height of that notch, about three, three and a quarter inches tall. So you're just going to set these up on a flat level surface and you want to make sure that the base has full ground contact and then you're going to be ready for a clean, confident approach that's going to help you get the job done right. Now if you happen to have any other questions, whether it's about these ramps or anything else that we carry here at etrailer, don't hesitate to reach out to us because we want to make sure that you're getting exactly what you need. Well, I think that's going to wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.