This compact 3/4" round LED light puts out a bright amber glow that stands out day or night. With a single LED that lasts up to 50 times longer than standard incandescent bulbs, you can count on steady performance without constantly replacing burned-out filaments. It runs efficiently within a 9V–16V operating range, delivering reliable visibility while drawing minimal power—just what you want for modern setups that monitor trailer lighting load.
The rugged rubber housing is made for hard use in extreme environments. Its flexible, heavy-duty body absorbs vibration and resists cracking, while the built-in strain relief keeps wiring secure over time. It’s the kind of solid construction you can install and forget about—it just keeps working no matter how rough the road gets.
Installation is straightforward. You only need a 1" hole at the mounting point, and the integrated rubber grommet holds the light snugly in place for a clean, recessed fit. The 2-wire design uses 0.180" male bullet connectors—one for power and one for ground—making hookup quick and foolproof.
This light is PC rated, so when properly mounted it doubles as both a clearance light and a side marker light. That means fewer parts to install and more consistent illumination around your trailer or rig. And with its DOT compliance, you know it meets the standards for visibility and safety on the road.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Peterson Round Amber Heavy Duty Mini-LED Clearance or Side Marker Light with the Built-In Grommet. Now, this is a small round trailer light, which you can function as both a clearance light and a side marker light when it's properly mounted. It does use a rugged rubber construction. Has the built-in strain relief right here, makes it durable in extreme environments, and it does use LEDs.
This one actually happens to use one LED. These LEDs make great replacements for incandescent lights, 'cause it lasts 50 times longer, and they're more efficient 'cause they'll provide brighter light with less power output. And of course, no bulbs to replace or brittle filaments that are gonna break. And they do have a lifetime warranty on the LEDs. As I mentioned, this is an amber lens, over one amber LED, and I am gonna hook this up to some 12 volt power just so you can see how bright it is.
So what we're gonna do, let's go ahead and hook up our ground. And we'll go ahead and hook up our power. And then what we're gonna do, turn on our 12 volt power, and you can see the amber LED light up with the amber lens. If I go ahead and turn off the overhead light, so you can see how bright it is. Very bright for a small one LED light.
And turn back on our overhead lights. Turn off our power and disconnect it. This is a recessed mount design. You can see right up here, it has the built-in grommet. Installation will require drilling a one inch diameter hole at the desired location for this to pop right in there.
It is a two wire design. You can see it's a single wire, but then there's two connectors here. They are bullet connectors, male bullet connectors, and one's the power lead, one's the ground wire. This light is DOT, Department of Transportation, compliant. It is PC rated, and it is made in the USA. It is for quantity of one light. Operating range is nine volts to 16 volts. And the last thing I want to do is just give you the measurements on this. So, if we get our ruler out, the diameter on the light, including the rubber grommet, is about one and one eights inches in diameter. The depth on it is right about three quarters of an inch. And then the total length, one end to the other, is about eight and three quarter inches long. But that should do it for the review on this Peterson Round Amber Heavy Duty Mini-LED Clearance or Side Marker Light with the Built-In Grommet.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.