2-1/2" Round. Waterproof, LED trailer light serves as a side marker light or a clearance light. Durable polycarbonate lens and housing. Recessed mount with grommet (sold separately). Accepts standard 2-pin PL-10 plug. Amber LEDs.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
This light has an industry-standard PL-2 connection as pictured above. The light accepts a 2-prong plug (A46PB or A86PB - both sold separately). The plug connects to 2 of the points on the PL-2 connection for power and ground. And the plug covers the unused third point on the connection to seal it against dirt and moisture.
Recessed-mount trailer lights install underneath a housing or a grommet, which is often sold separately. These lights will extend into the mounting surface and require that a hole be cut into your trailer.
Recessed-mount trailer lights install underneath a housing or a grommet (A55GB, A56GB, or A57GB - all sold separately). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at an LED amber clearance or side marker light from Optronics. This round trailer light can function as both a clearance light and side marker light when properly mounted. Features a sonically sealed waterproof housing and lens unit that is submersible. And it features durable surface mount technology when it comes to the construction of the LED circuit board. What that does, is it simply better withstand shock and vibration, and allows for improved heat distribution.Now this is a LED system. LEDs make great replacements for incandescent lights.
They last longer. They burn brighter and they're more efficient. With LEDs, you don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments. This unit contains a durable polycarbonate housing with an acrylic lens. It is compatible with 12 volt electrical systems.
Now on the back side, it accepts an industry standard 2-prong plug which is sold separately and available at etrailer.com. Also, when it comes to the installation It's a grommet mount installation.Your mounting grommet is sold separately as well. Also available at etrailer.com if needed. It is Department of Transportation compliant. It meets FMVSS 108 requirements and any 360 degree position.
Taking a look at the dimensions real quick, then we'll hook it up to power. Overall diameter is 2-1/2". The overall depth of the lens area is 3/4 of an inch deep. We're gonna go ahead and hook it up to power.I have my 2-prong plug here. So it just plugs into the connection points around the back of the unit.
Presses in. Creates a nice tight fit. So you can see here that it sends out a nice, consistent signal. We have three LEDs with three diodes. So the multi-diode design really helps optimize the overall light output. Clear lens allows plenty of light to come through. Nice amber color. Power drill at 12.8 volts at 0.06 amps. And Optronics puts a lifetime warranty on the LEDs.And that's gonna do it for today's look at the Optronics LED amber clearance or side marker light.
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
2-1/2" Round. Waterproof, LED trailer light serves as a side marker light or a clearance light. Durable polycarbonate lens and housing. Recessed mount with grommet (sold separately). Accepts standard 2-pin PL-10 plug. Amber LEDs.Really good lights
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.