5-1/2" Round. Waterproof trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Recessed mount with included black PVC gasket. 10 White LEDs. Clear lens.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this Optronics four inch round LED backup light with a clear lens for a quantity of one light. Now this is a round backup light for trailers and utility trucks. It is certified for backup light function in a two-ramp system when a pair of lights is installed. Now this is just for a quantity of one.
If you do need a second one, we do sell those separately. This is a sonically sealed waterproof housing and lens unit. It is submersible, and it uses LEDs. The LEDs make great replacements for incandescent lights, 'cause they'll last 50 times longer, they're more efficient, provide brighter light with less power output, and of course, no bulbs to replace, no brittle filaments to break. And you do get a lifetime warranty on the LEDs.
Now I do have this plugged in, so I'm gonna turn on some power, and you'll be able to see the backup light function. We'll go ahead and turn off the overhead lights, and you can see it is very bright. It is 10 white LEDs with a clear lens, and turn off our power. And it is a polycarbonate lens and housing unit. Does use a recessed flange mount with the included foam gasket when you install it.
And the light is designed to fit into a four and a half inch, go ahead and unplug it here, fits into a four and a half inch diameter hole. It does accept the industry standard PL3 connection plug, which we do sell separately. And this light is DOT, Department of Transportation compliant. It does meet the Federal Motor Vehicle Safety Standard 108's requirements. Power draw on this at 12.8 volts is 0.26 amps, and the light dimension, if we measure the overall, including the flange, five and a half inches, the light just itself is four inches.
And the total depth, including the part where the plugin is about one and 11/16 inches deep. But again, when you go to install this, just put your gasket on, line the holes up, and then you install it just like that. But that's gonna do it for the review on the Optronics four inch round LED backup light with the clear lens.
rugged and bright
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.