Dexter Tandem-Axle Trailer Equalizer Kit for 3" Slipper Springs - 14-1/4" Long Equalizers
(4 reviews)
Price: $380.32
Dexter Tandem-Axle Trailer Equalizer Kit for 3" Slipper Springs - 14-1/4" Long Equalizers
Item # HAP-203-01
Retail:$601.78
Our Price: $380.32
You Save: $221.46
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (4)
- Q & A (0)
- Videos (1)
- Photos
Dexter Trailer Leaf Spring Suspension - HAP-203-01
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 3 Inch
- Tandem Axle
- Dexter
Kit includes 14-1/4" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.
Features:
- Attaches 4 leaf springs (sold separately) to your trailer frame
- Use table below to determine hanger location (when used with HAP-103-00)
- Includes:
- (2) 4-1/8" Tall center hangers with 1-1/8" bolt holes (29-43-2)
- (1) 14-1/4" Long, left-hand equalizer (13-107-7LH)
- Allows for 38" between axles
- (1) 14-1/4" Long, right-hand equalizer (13-107-8RH)
- Allows for 38" between axles
- (2) 4-1/2" Long x 1/2" diameter spring keeper bolts (7-95)
- (2) 1/2" Diameter locknuts (6-46)
- (2) 5-1/2" Long x 1" diameter spring-eye bolts (7-169)
- (2) 1" Diameter locknuts (6-112)
- (2) 6" Long x 1-1/8" diameter equalizer bolts (7-170)
- (2) 1-1/8" Diameter locknuts (6-72)
- Use in conjunction with HAP-103-00 for complete kit
- HAP-103-00 includes front and rear hangers and mounting hardware
- Designed for use on trailers with tandem, 10,000-lb to 15,000-lb, heavy-duty Dexter axles
- Does not include components for mounting axle to springs
| Axle Capacity | A - Distance Between Front and Center Hangers | B - Distance Between U-Bolts | C - Distance Between Center and Rear Hangers | D - Distance Between Center of Axle and Trailer Frame |
|---|---|---|---|---|
| 10,000 lbs - 15,000 lbs | 33" | 38" | 32-2/5" | 5-1/2" |
HAP-203-01 Dexter Hanger Kit - 3" Slipper Springs - 10,000 lbs to 15,000 lbs Heavy Duty
Video of Dexter Tandem-Axle Trailer Equalizer Kit for 3" Slipper Springs - 14-1/4" Long Equalizers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Redline Trailer Leaf Spring Suspension - Tandem-Axle Trailer Equalizer Kit - HAP-203-01
Hi everybody, Andy here with etrailer.com and today we're gonna take a look at this Dexter tandem axle trailer equalizer kit. Now this kit includes the equalizers, bolts and center hangers for attaching four three inch slipper leaf springs to your trailer frame with 10,000 pound to 15,000 pound heavy duty Dexter axles. Now you can use this with the kit number that you see there on your screen and that kit includes the front and rear hangers and the mounting hardware necessary for a complete tandem axle kit. So if you are in need of that I am including our item number for that kit as well on your screen. But this kit includes everything that you see here on the table before me. You're going to get two four and one eighth inch tall center hangers with one and one eighth inch bolt holes.
And just to show you how we measure the height of these hangar, in case you are unaware you're just going to measure from the center of the bolt hole to the top of our hangar and that as you can see, gives us our measurement of four and one eighth inch tall on those center hangers. So you're gonna get two of those center hangers and then you're going to get two, one left hand and one right hand, 14 and a quarter inch long equalizers that will allow for 38 inches between your axles. So just to confirm that length with you on these equalizers that you can see, we are sitting at 14 and a quarter inches in length on those equalizers. And then you are going to get two four and a half inch long by half inch in diameter spring keeper bolts with the half inch in diameter lock nuts that I have attached to the bolts. And then two five and a half inch long by one inch in diameter spring eye bolts with two one inch in diameter lock nuts that I have attached there.
And then finally two six inch long by one and one eighth inch in diameter equalizer bolts with two of the one and one eighth inch diameter lock nuts that I have there attached. So this does not include the components for amounting axles to springs. Instructions are included and that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Dexter Tandem-Axle Trailer Equalizer Kit for 3" Slipper Springs - 14-1/4" Long Equalizers - HAP-203-01
Average Customer Rating: 4.3 out of 5 stars (4 Customer Reviews)
Kit includes 14-1/4" long equalizers and bolts and shackles for suspending your leaf springs from your trailer frame. Use with HAP-103-00 for a complete tandem-axle kit. Designed for use with 10,000-lb to 15,000-lb, heavy-duty Dexter axles.by: Daniel07/11/2021
First class customer service, quick delivery. etrailer is my one stop shop for trailer parts. I have tried [other online site] and other sites but I always wind up buying at etrailer. They make sure you get the right parts and always follow up with me after I receive my parts to make sure that I am satisfied. Ordering from Canada is a breeze..
by: Kelli 08/16/2022
You Guys are Awesome! We were in dire need of this part and couldn't get it from anywhere else. I ordered it from your web site and it came a week earlier than we were told. thank you for the great service.
by: Deep04/16/2024
by: Steve 11/15/2023
4
4
See what our Experts say about this Dexter Trailer Leaf Spring Suspension
- Can you Explain Why the Roadmaster Comfort Ride Leaf Spring Kit Does Not Use a Suspension Equalizer?The Roadmaster Comfort Ride Leaf Spring Suspension Kit # RM-2460-2570 that you are looking at is designed to allow each axle to act independently of the other, similar to the way torsion axles work. While it uses slipper springs to achieve this on your trailer traditional tandem axle slipper springs systems will still offer an Equalizer like # HAP-203-01. I do recommend using equalizers with your leaf spring suspension whether you have double eye springs or slipper springs, as they allow...
view full answer...
Info for this part was:
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Eric H
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Daniel
7/12/2022
Still very satisfied after a year. customer service is 1010. thank you!