1. Trailer Jack
  2. Bulldog
  3. Side Frame Mount Jack
  4. 7000 lbs
  5. Sidewind Jack
  6. No Drop Leg
Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 7,000 lbs

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 7,000 lbs

Item # BD198250
lowest price pledge
Retail:$207.07
Our Price: $112.09
You Save: $94.98
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 19 lbs
Quantity: 
In Stock
Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 7,000 lbs Sidewind Jack BD198250
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Footplate and 5/8" diameter pin are included with this round, tubular, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 16" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle. Lowest Prices for the best trailer jack from Bulldog. Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 7,000 lbs part number BD198250 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (74)
  • Q & A (17)
  • Photos
  • Why etrailer?

Bulldog Trailer Jack - BD198250

  • Side Frame Mount Jack
  • 7000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Weld-On
  • Bulldog
  • Swivel Jack - Pipe Mount
  • With Foot
  • 15 Inch Lift

Footplate and 5/8" diameter pin are included with this round, tubular, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 16" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle.


Features:

  • Dependable jack is recognized as industry standard for agricultural and commercial applications
    • ASABE compliant
  • Tubular swivel design lets you swing jack up for travel, down for use
    • Included pull pin holds jack in place
  • Precision-fitted parts provide exceptional stability and reliability
  • Sidewind handle has smooth, ergonomic design for easy cranking
  • Outer tube is gray-paint finished
  • Inner tube is zinc plated
  • Weld-on pipe mount and standard footplate included


Specs:

  • Bracket height:
    • 16" Retracted
    • 31" Extended
  • Lift: 15"
  • Clearance: 6-3/8" from mounting bracket to top of jack
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Handle radius: 8-1/2"
  • Pull pin diameter: 5/8"
  • Lift capacity: 7,000 lbs
  • Static capacity: 7,000 lbs
  • Limited 5-year warranty


198250 Bulldog Round Tubular Swivel Jack, Sidewind, 15" Travel, 7,000 lbs - SWL 198 DTSM w/ P & C




California residents: click here



Customer Reviews

Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 7,000 lbs - BD198250

Average Customer Rating:  4.9 out of 5 stars   (74 Customer Reviews)

Footplate and 5/8" diameter pin are included with this round, tubular, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 16" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle.

- BD198250
by:

Very smooth action. Works as expected. 7k way too much for my 700 tongue weight but I needed the size. Very nice replacement



- BD198250
by:

We put this on a heavy-duty flatbed dump-trailer that hauls 4-ton+ payloads. We needed the fold-away feature to accommodate loading long items that extend past the front of the bed. It has performed great - easy to crank, easy to fold away. We love it and I highly recommend it.



- BD198250
by:

Exactly what I needed. Arrived next day



- BD198250
by:

it's what i needed for the zero turn mower to make changing blades very simple to lift and have sufficient room to clear the mower's hood.



- BD198250
by:

Great trailer jack. Used it to replace a top wind one that had gone bad. Shipping was a little high, but price was just right.



- BD198250
by:

The only issue was the box was damaged when it arrived. The plastic knob on the crank handle was in pieces. I think we can remove the one off the old jack and use it. UPS is not real gentle when they load and offload packages. Otherwise everything was in good shape. Thank you, Stephen Tallman, SDG&E



- BD198250
by:

great product does everything it claims to do is very smooth very sturdy should last a lifetime


Comments
I use this product constantly and it is still awesome, YES purchase this one! Still 5 Five stars
Steve V - 02/14/2016



- BD198250
by:

Quick delivery and high quality part. Perfect fit.



- BD198250
by:

Katherine was very helpful in getting the order correct. The quality appears to be there on the product. In the future I would order from your company again.



- BD198250
by:

Very good quality.



- BD198250
by:

Just what the doctor ordered



- BD198250
by:

Very good service. Got exactly what I was looking for. Fast delivery. Very nice and helpful people to work with.



- BD198250
by:

Thanks for the "SUPER FAST DELIVERY" !!! Great product, and a great Deal !!!!



- BD198250
by:

Works like it should



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Fantastic Jack. Works better than any jacks I have ever used on my trailers. Highly recommend them to anyone needing to replace a jack or if you are building a new trailer.



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


We are an OEM and had a customer spec a trailer jack from another website. When we couldnt procure that trailer jack anymore, etrailer helped cross to this one. Pricing was in line and the customer liked the new product.



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Lucky to have buddy who knows how to weld but it went in easy and appears to be much more durable than cheap one that came with the trailer. Will add photos when I can



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Lori was very helpful to change order when first items were out of stock. Jacks look well built. Delivery was sooner than expected. Thanks for everything.



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Received product in 2 days, excellent communication on order status and follow up once order was received. Installed these on a 20’ utility trailer to stabilize the rear when I load my skid steer. Thank you.



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Welded them to trailer for stability during rear loading, also good for changing out wheels



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Nice jack. We sell lots of these bulldog jacks. They're very reliable.



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Lightning fast shipping. Quaility parts. Outstanding customer service. Couldn’t ask for better service. Thank you!



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


great product and etrailer went above and beyond to help me get my jacks. they were sent and for some reason i didn't get them, called etrailer they got them right back out and i have them Thanks!



- BD178201
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Great product, has held up to its name. Very good customer assistance and prompt delvy. Awesome job all around.



- BD178203
by:

Review from a similar Round Pipe Mount - Sidewind in Trailer Jack


Ordered the Bulldog jack , service was fast and accurate. Gave the product to a friend to replace the Bulldog jack on his trailer since I had broken the jack on his trailer when I borrowed it.


27
76
Show More Reviews

Ask the Experts about this Bulldog Trailer Jack

  • Distance From Center of Pipe Mount to Bottom of Foot On Bulldog Trailer Jack BD198250
    In regards to the Bulldog Round, Pipe-Mount Swivel Jack part # BD198250, the distance from the center of the pipe mount to the bottom of the foot is 16" while retracted and 31" while extended.
    view full answer...
  • Bulldog Trailer Jack Recommendation for Trailer with 2-1/2 inch Pipe Mount on Trailer
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. When fully extended it is 31 inches from where it mounts to jack to the ground. It sounds like this jack would work well...
    view full answer...
    Image 1 for
  • Mounting Ring Diameter for the BullDog Round, Pipe-Mount Swivel Jack # BD198250
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
    view full answer...
    Image 1 for Image 2 for
  • Capacity of Bulldog Round, Pipe-Mount Swivel Jack # BD198250
    The capacity of the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind # BD198250 has changed and is currently listed as 5,000 lbs lifting and 7,000 lbs static capacity (supporting weight without lifting).
    view full answer...
  • Pipe Mount Trailer Jack Recommendation to fit 2-1/2 inch Pipe Mount on Trailer
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. When fully extended it is 31 inches from where it mounts to jack to the ground. It sounds like this jack would work well...
    view full answer...
  • Are Replacement Gears for Omni 5,000 lb Pipe Swivel Jack Available?
    The Replacement Sidewind Gear Kit for Bulldog Jacks - 7,000 lbs # BD500156 is what is used for the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs # BD198250 you asked from. I can't find any info on your Omni 5,000 but I've attached a photo of the gear dimensions in that kit to assist for comparison.
    view full answer...
    Image 1 for
  • Pipe Mount Trailer Jack
    In your case the setup is designed for the jack to fit inside of the pipe mount rather than outside the Bulldog Round, Pipe-Mount Swivel Jack part # BD178203 is designed to fit a pipe mount that has a 2-1/2 inch outer diameter and a 2 inch inner diameter. As long as the pin hole on your pipe mount is 5/8 inch in diameter this jack would work well for you. I attached a review video for you to check out as well.
    view full answer...
  • Recommended Weld-On Swivel Jack with 5-7K Lift Capacity
    We do have a few pull pin swivel jacks available with an aluminum construction such as the Fulton F2 Swing-Up # F1413050334, however they all have lower weight capacities than what you are looking for. This particular jack has a weight capacity of 1,600 pounds. For a swivel jack with your required capacity, I recommend looking at the Bulldog Round, Pipe-Mount Swivel Jack # BD198250. This weld-on sidewind jack has a lift capacity of 5,000 pounds and a total lift of 15 inches. While this...
    view full answer...
  • Is a Handle Included With Bulldog 7,000lb Pipe-Mount Swivel Jack BD198250
    Yes, the Bulldog swivel jack # BD198250 does include the jack handle. The jack features a lift capacity of 7,000lbs, and it comes with a limited 5-year warranty.
    view full answer...
  • Pipe Mount Jack Recommendation to Attach to 2-1/2 inch Mount on Trailer
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. When fully extended it is 31 inches from where it mounts to jack to the ground. It sounds like this jack would work well...
    view full answer...
  • Trailer Jack Pipe Mount Upgrade From 3,000 lb Bulldog Swivel Jack
    Thank you for the pictures and info! Since you had a Bulldog winch I recommend sticking with that brand because they are reliable and you can be confident that the pipe mount will match up exactly. To upgrade from a 3K we have the 5K # BD178203 or 7K # BD198250 depending on how much extra capacity you'd like. They both have a 15" lift and they are backed by a limited 5-year warranty so either one will fit your needs just fine.
    view full answer...
    Image 1 for Image 2 for
  • Can 7,000 lb Square Direct Weld Jack TJD-8000 be Trimmed
    You won't want to cut a jack like the Square Direct Weld Jack # TJD-8000, with the issue being that doing so you would cut the lift rod inside the jack, not to mention void the warranty, and compromise its capacity. So I would avoid doing that, though I can sympathize with your issue, as 4 or 5 inches is pretty low. There isn't an absolute minimum standard for how high off the ground a jack should be, but generally you want a jack to be about 8 inches off the ground to ensure clearances...
    view full answer...
  • Replacement Bulldog Jack Recommendation to Fit Trailer with Round Pipe Mount
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
    view full answer...
  • Will the Replacement Sidewind Handle for Bulldog Round or Square Jacks fit on a 7,000 pound Jack
    To determine the correct jack handle and gears for your Bulldog 7,000 lbs. jack, I will need to know the model number of your jack to help determine the correct parts. If your jack is similar to the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, with the top mount gear box, the correct handle will be the Sidewind Handle for Bulldog Square Jacks, item # BD500171. There are two possible sets of gears that could fit your jack and you will need...
    view full answer...
  • Weight Capacity of Trailer Jack Caster Wheels for Bulldog Jack
    Bulldog Side-Mount trailer jack # BD198250 comes with a foot plate as standard. Bulldog jacks like # BD1541150301 are also available without a foot to allow you to select one like # BD018564 or to use a wheel like # BD500245. Please do note that a jack wheel will have a lower weight rating than a standard foot plate. If you were to use the side-mount jack # BD1541150301 with caster wheel # BD500245 the jack weight rating would then be limited by the 1200-lb rating of the wheel assembly. The...
    view full answer...
  • 1,000 lb Jack Recommendation for Boat Trailer with 2 inch Pipe Mount
    The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
    view full answer...
  • Pipe-Mount Swivel Jack That Fits 2-1/2 Inch Inside Diameter Pipe Fitting
    We do have a pipe mount jack that will fit a pipe mount that has a 3" outside diameter and 2-1/2" inside diameter. Since your pipe mount has the same diameter as the Bulldog Weld-On Jack Pipe Mount # BD005024, you can use a Bulldog jack that fits that size pipe mount: - Bulldog Round, Pipe-Mount Swivel Jack - 7,000 lbs # BD198250 This jack has a 7,000 lb capacity so it is a heavy-duty option like you were wanting, and has a sidewind handle for easy use. I have added a link below to...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Patrick B
Installed by:
Patrick B
Employee Jeff D
Installed by:
Jeff D
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Sarah W
Updated by:
Sarah W
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.