1,000 lb Jack Recommendation for Boat Trailer with 2 inch Pipe Mount
Updated 04/07/2015 | Published 04/06/2015
Products Featured in This Question
Question:
I have a problem, i need to replace my boat trailer jack but all jacks in my area are the same. The center hole on the mounting bracket is for a 2 inch hole, I need an 800 or 1000 lbs jack that has a hole of 2 1/2 inches. Does your company have any jacks with a center hole of that size?
asked by: Chuck T
Expert Reply:
The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer.
For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds, we have the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 5,000 lbs, item # BD178203. This is the largest capacity jack we have with a 2 inch round mounting pipe. This jack also uses a 5/8 inch pin to secure the jack to the trailer.
