Corrosion-resistant galvanized steel hub is great for marine use. Fits 8,000-lb axles with #42 spindles. Can be used on idler axles or paired with a 13.1" rotor for disc brake applications. 9/16" Wheel studs and races are included.
Features:
Specs:
Bearing, Race, and Seal Information:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the DeeMaxx Galvanized Steel Trailer Idler hub for 8,000 pound axles. Has an eight on 6 1/2 inch bolt pattern and it uses 9/16 diameter bolts. Now this is a marine grade trailer hub assembly that'll fit idler. Axles can also be paired with an over the hub rotor for disc brake applications. It is a galvanized steel construction makes item very durable and corrosion resistant.
So it is great for use on boats or snowmobile trailers. It does use long wheel studs so to let your mount an over the hub brake rotor or a custom wheel with a thick mounting pad. The bearing races you can see are pre-installed. There's the outer bearing race there's your inner bearing race. Now the bearings, the grease seal and the grease cap that fit this are not included.
We do solos separately on our website and if you look at the bottom of this product page it'll list the part numbers for those items that'll fit this part. Again, the application for this is 8,000 pound trailer axles with number 42 spindles. The weight capacity on this one hub is 4,000 pounds so when it's used with one on the other side of the axle it'll meet the 8,000 pound axle rating. Bolt pattern we mentioned on this is an eight on 6 1/2 inch bolt pattern. The wheels stud are 9/16 inch diameter.
The lugs they use are 9/sixteens by 18 threads per inch. Total weight on this hub is about 16.4 pounds. But that should do it for the review on this DeeMaxx galvanized steel trailer idler hub for 8,000 pound axles with an eight on 6 1/2 inch bolt pattern and 9/16 diameter bolts.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Corrosion-resistant galvanized steel hub is great for marine use. Fits 8,000-lb axles with #42 spindles. Can be used on idler axles or paired with a 13.1" rotor for disc brake applications. 9/16" Wheel studs and races are included.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.