To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
This hitch fits a 2019 Honda CR-V with no cutting. I installed it myself and it looks good.
Ordered a Draw-tite hitch for my 2018 Honda CR-V. Hitch arrived super fast but the box had torn open during shipping (no fault of etrailer). Hitch was ok but hardware was missing. I called etrailer and spoke to Amy J. She took care of everything by quickly sending out new hardware. I can now install the hitch. Thank You Amy.
Victoria H.
3/4/2025
I'm so glad to hear that Amy was able to helped turn this experience around for you, Paul! I will let know you reached out.
Like the product! Misleading install info. Exhaust hangers were a bear to disconnect. A special tool which wasn't mentioned in the product info would of made job much easier. Install took twice as long as advertised.
Brooke M.
5/20/2025
Hey, Duke! I appreciate the honesty with what would improve the videos. Out of curiosity, which tool are you referring to that would have been nice to have on hand before starting?
4 out of 5 cause there's a small detail I wold have liked to see done better.
The bolt and washer for attaching in the center could have a better washer that grabs more of the part on the car.
It's fine, but hey, could be better!
And be ready for a little fight with those exhaust hangers,
Use lots of soapy water in there to pop them off.
Fast shipping. Perfect fit, easy instructions to follow. Just made a trip with my bike rack installed in the hitch and worked great. Fish bolts through frame first and don't remove the bolt feeding wires until the hitch is positioned against the frame. Recommend having a jack stand and some way to balance the hitch when raising it into position and fishing bolts into position in car frame. It's tricky to do by yourself otherwise! During installation, the hitch tends to tip down towards the front end of the car - maybe put a pipe or weight into the hitch receiver to balance things out.
The first hitch we ordered didn’t fit. Talked with Nick customer service. He was quick to reorder a new hitch and a return for the original order. Great customer support
Gwendolyn Y.
4/14/2025
Happy that Nick was there to save the day! What are you going to be hauling with your hitch, Roger?
William’s tech knowledge guided me to the correct hitch that fit my installation requirements. It arrived in two days, installed it the third day. Fit like a glove.
Thanks,
Larry
Go ARMY beat navy
Victoria H.
3/28/2025
William really got you hitched up with what you needed in a hurry, sounds like the mission was accomplished! I'll let Bill know you gave him a shout out, are you towing anything fun?
Quick delivery! Installation took about 21/2 hours not that bad to install for an average guy on the ground in my garage!!!
Was exactly what was advertised. Bolted up to honda crv with no problems. Putting The wire fishing tool for the frame in the kit is a great idea.
The installation instructions were clear and easy to follow. The "cheat" nut-placing wire tool was novel and indispensable for bolting on the hitch. I am very pleased with this purchase!
Very pleased with the weight, obvious strength of me hitch receiver. Fit and finish are excellent
Mounted and works as advertised! I will be able to swap this hitch over to a 2025 Honda CRV based on the confirmation from Lilliane! Thank You for the quick response and excellent customer service!
So easy it install with the video, took me maybe a little over an hour! Works great
Easy to order hitch and wiring at etrailer. Arrived on schedule. I will wait for Spring's warmer weather to install on my vehicle. Website videos of the installation process for my vehicle are excellent and easy to follow. Thank you.
Hitch installed as instructed. Everything needed was provided and everything fit. Installation was a two person job.
My etrailer experience was exceptional. The order (hitch, hardware and rubber hitch cap) arrived nicely packaged, all intact and a day before it was promised.
The installation difficulty level was moderate since I did it alone from the ramps in tight space. It would be easy for 2 persons though. Video from etrailer helped a lot!
I touched a few paint chips and use wrapping to reduce install related paint damage.
After disconnecting 2 rear rubber muffler mounts and insetting 4 x7/16" bolts the hitch was placed on the top of muffler and supported there with jack until was bolted on. All took about 2.5 hours. Not counting couple visits to local Home Depot (to replace the lock washer since spacer block is crooking and was flipped on the other side. And to get additional socket adapters to make it work in tight space).
The hitch itself is tough and well constructed, except that one layer of paint is not be enough for NY winter. Rust prevention spray (e.g. T-9 Boeshiled or something similar) will be needed.
Yakov 
7/8/2020
The hitch works well. Bike rack and bikes are stable and secure on multiple trips. It holds well after an year with rust prevention spray no visible rust, paint still intact.
I purchased and installed a Draw-Tite hitch for my Xterra 15 years ago and it never let me down. So decided to go that route again, but in this case with smaller car mostly for hauling bikes.
Installation was straight forward, and watching the installation video beforehand really made the process much smoother. The fish wires are AWESOME. I did the installation myself. The trickiest part was holding it up... which I did buy using a strap to tie the bracket at the back of the hitch receiver to the tow hook, so I could then maneuver easily to align the frame bolts... then after loosely tightening those, I untied and put the final bolt in place.
I used silicone spray on the rubber isolators, to avoid degrading the rubber.
The only deviation I found from the instructions was I had to use the largest access hole to install both frame bolts/spacers on each side... as the spacers would not fit through the smaller access hole next to the fwd frame bolt hole. It was not an issue, the fish wires made it easy to do this.
The whole process once parts/tools/care were prepped was 2 hours. I didn't rush. I installed the 118741 vehicle harness after this was done, it went smoothly too after watching the video.
Looking forward to many good years of use of this hitch!
Chris
1/6/2021
A year later and Im still extremely happy with this hitch. Used it for bike racks and pulling several trailers around without issue.
Pretty easy install. The best 2” receiver for your money.
I don’t write too many reviews unless product and service is exceptional or poor. My dealing with etrailer was exceptional. From help on the phone to make sure I received correct wiring harness to shipping to ease of instillation. Ian assured me of the correct harness, shipping was quicker than quoted. After watching instillation video on etrailer I was ready to go. I’m installing on 2018 Honda CRV and was never sure that nothing had changed from 2017 CRV. I was hoping maybe Honda would move wiring connection to a easier more logical location. The hitch took 50 minutes to install. Went exactly as etrailer video showed. The only problem I had was lining up hitch plate with tow loop. I suggest loosening up mounting bolt as far as possible and jacking directly under back end of receiver opening. I could not do this by hand but only took 3 pumps on my floor jack and everything lined up. I installed by myself and used a jack stand to balance one side of hitch while I bolted the other side. All hardware tightened and torqued nicely. I did loosen the mid muffler hanger for a bit more room. The Honda wiring harness was exactly where etrailer video showed it to be. Wiring was a struggle due to panels braced in place and I was unable to remove. I had very little room to work and needed wife to pull on panel while I put wiring in place. Watch the instillation videos on etrailer, it is perfect, explains everything you need to know and how to do it. Hitch install was 50 minutes by myself. Wiring install was 90 minutes and I needed extra hands. Price was great and I will go to etrailer for my future needs.
Patrick
5/2/2019
It has now been a year and hitch and wiring are still working perfectly. Thanks etrailer.
Hitch mounted with no problems. Instructions were clear. The hitch works well.
I use it to carry my bike rack.
Carl
9/23/2024
Product is still working perfectly as intended.
Install took 90 minutes from backing up onto ramps to rolling back down. Pretty straightforward, watch the video a couple times and you won’t even need the instructions. My car is the 2018 CRV Touring with the hands free tailgate.
Notes:
1. I bought the exhaust hanger tool online and it was worth every bit of $20 to pop the pins out of the rubber bushing.
2. Exhaust hanger tool was useless for re-install, all you need is some silicone spray and strong fingers.
3. Two person job for sure. I held the unit in place while my son got all the nuts on finger tight.
4. Most important, the hands-free liftgate works just fine!
I attached my bike rack (1Up USA 2”), tossed a bike on, and drove around for 10 minutes, everything is good.
Pete L.
4/16/2020
Perfectly!
Here's a tip that might save some freaking out from happening. When I raised the vehicle I only did the right rear side just high enough to get my lowest jack stand under and be able to roll far enough under to reach the exhaust hanger in front of the rear axle. when I got the hitch loosely secured on the main four bolts I next went to install the hitch to tow point bolt and it was not lining up. took me a minute but I finally realized the vehicle being off level cause I only raised one side was enough to not allow it to fit correctly once I leveled the vehicle up it lined up perfectly.
Another Install note: since I installed this bymyself I let the exhaust loose from the rear hangers and left the one in front of the axle secured which allowed me to rest the hitch on the right and left mufflers. when I was ready to secure the bolts I only had to push the hitch up a few inches on the side I was working on and the other side stayed put on top of the muffler. Once it was loosely secured I then let the front one loose and that allowed the muffler to drop for me room to have room to work the torque wrench.
Great Product very nice to install everything fit well and shipped on time. this is my second hitch from E-Trailer.
Greg M.
8/8/2018
The Hitch is awesome and works well
This is my third hitch from Etrailer. Always great service
Product was shipped and delivered without dents or chips in the trailer hitch. Video instructions were super helpful to install DIY. Elevated the rear of my car driving up two ramps placed underneath my rear tires to allow me enough working space underneath the vehicle. Took two people to lift and balance the hitch up towards the bolts and screw on the washer and nuts. Took about 1 hr of time to install. Works great to carry my 2 inch Kuat two bike rack.
Regan
10/8/2022
After installing and using my hitch for carrying my bike rack for the past year, I have had zero issues. Finish is still in great shape and very satisfied with my install and product. Would highly recommend.
I was just about to email Adam and let him know that mine is installed and ready to go. My return Curt receiver will be on its way back tomorrow. Great service, Thank you
Gwendolyn Y.
12/16/2024
Hey neighbor! Happy to hear that you got everything hitched up! I'll pass this on to Adam for you too.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
William
12/3/2024
Works great No issues