bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Draw-Tite

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

$203.25
Retail:$366.13
You Save: $162.88
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75992 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (432)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Concealed Cross Tube
  • 400 lbs TW
  • Draw-Tite
  • 4000 lbs WD GTW
  • 400 lbs WD TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 4,000 lbs
    • Maximum tongue weight: 400 lbs
      • Maximum TW when used with weight distribution: 400 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75992 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87682 Hidden Hitch Class 3 Trailer Hitch Receiver

Replaces 75709

Replaces 75526

Replaces 87433

Item # 75992

Installation Details 75992 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

433 reviews
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

The hidden hitch and wiring harness looks to be of high quality. Hitch looks great on our 2013 Ford Edge.
I sold my truck so any trailer pulling will now be done by the Edge. I only pull a light trailer with a garden tractor etc.

Larry
Northern, In.



by:
Ford Edge

Great hitch for an EdgeEasy kit to install and great fit



by:
2010 Ford Edge

Fit great on 2010 Ford Edge Limited Awd. Real easy to install.



by:

Fast delivery, arrived in great shape. Video is very helpful. Thanks



by:
Ford Edge

I like the hitch, it installs easily and looks good on our Edge.



by:

Great product and excellent customer service :)



by:

The hitch is great, does exactly what it is supposed to do.



by:

Great product, just as advertised, fast free shipping. Watch the video makes installing this a breeze



by:

Thank you for the prompt service. The items were delivered to
me today. Great Service!!
Sincerely, Bob



by:

Great Product,Recieved in less time then i was told. Installed in about the sametime as advertised and no issues. I would recommend.



by:

Great, strong and sturdy product. Very easy install and fits perfectly! Nothing bad to say about this product at all.



by:

Product was just as expected.The super fast service from these guys is what will bring me back to them for my automotive needs again.Good job guys keep up the good work!!!!!!



by:

Thanks for all the details that a person needs to do it themself and not have to call customer service!! It was very easy to install I would buy another when i need one



by:

Exellent product, excellent service, excellent company, easy installation.



by:
2010 Ford Edge

Installation of Draw-Tite Hitch #75526Very Easy to install on my 2010 Ford Edge great directions if you do what they say No Problem!!!



by:

installation was not badproduct installed easily, the instructions were helpfull, the bolts went throught the frame supprisingly easilly... all was a breaze, save 100+ $ on instilation



by:

I am very pleased with my shopping experience with etrailer.com! I have told my family about this site, & I will look at this site first before looking on any other site when I need a product like again.



by:

The product is excellent and the installation videos on their website took all of the guesswork out of it for this "do it yourself-er". Ordering from etrailer.com could not have been easier. They shipped it out the very same day of my online order. I am very satisfied with every aspect of my purchase.



by:

The box got to the house on a Friday and I was putting it together on Saturday morning. The video was very valuable and the written instructions were clear as well. It only took me 15 minutes longer than the suggested time mostly because I was taking my time. Great product and advise.



by:
2007 Ford Edge

Fit PERFECT, bolts need a trimI just finished installing the unit on our 2007 Edge.
All the parts were there, but on my ford access to the rear frame openings were plugged, so i fished the bolts n from the outer side frames rails. The bolts included needed a tweak to shave one side of the head flange down so it would fit through the access hole.
Total time as 1 hr and 20 minutes. It was 20F outside so worked slow
I could have enlarged the frame hole, but it only took a minute to grind off a 1/8" off one side of the bolt.



by:

Was very easy to install! Was pleased with my whole experience from ordering to delivery! The video demo was exactly the way you have to install the hitch! This was my 1st time installing a hitch and was very simple and straight forward. Very happy!



by:
2007 Ford Edge

A nice productI installed this by myself. I used a floor jack to hold it in place (a bit challenging).
I put it on a 2007 Ford Edge in order to use a bike rack carrier.



by:
Ford Edge

This is a great hitch. Mounting it to my Ford Edge was pretty straight forward and only took about an hour. I would recommend this hitch to anyone.



by:

Great product and shippingThe trailer hitch, wiring harness, installation, etc. was as advertised. Everything arrived and installed great.



by:

Product arrived in 5 days, fit perfectly. The hitch was completely hidden except for the square tube. Alternate curt wiring also was flawless. Very pleased


25
433
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Trailer Hitch Recommendation On A 2011 Ford Edge SEL
    We have two Class III hitch receivers available for your 2011 Ford Edge SEL, Curt part # C13067 and Draw-Tite part # 75992. In order to tow a trailer with 2 jet skis, you will need the weight capacity a Class III hitch offers. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver as this hitch will not be as visible from above in comparison to the Curt Trailer Hitch Receiver. The Draw-Tite Class III hitch is rated for 4000 lbs. of gross trailer weight (GTW) and 400 lbs. of tongue...
    view full answer...
    Image 1 for
  • 4-Way Flat Wiring Recommendation for a 2010 Ford Edge
    In addition to the Draw-Tite Trailer Hitch # 75992 for your 2010 Ford Edge, I recommend the following wiring and mounting brackets: - T-One Vehicle Wiring Harness # 118551 - Brophy Mounting Bracket # BK4F - Curt No-Drill Bracket # C57202 This gives you the best 4-Way wiring kit on the market as well as what you need to hold the 4-Way near the hitch receiver for easy access when needed. attached are some videos for you to check out!
    view full answer...
  • Cargo Carrier and Bag Recommendation for a 2013 Ford Edge
    The Pro Series Cargo Carrier part # 63153 that you referenced would be an excellent choice for a cargo carrier for your 2013 Ford Edge. In fact, it's the most popular cargo carrier we offer with other owners of 2013 Ford Edges. Check out the review video I attached that shows this carrier being demoed on a 13 Edge just like yours. For a cargo bag you would want the etrailer.com Extra Large Cargo Bag for Hitch Mounted Cargo Carriers # 988501. If you need a hitch too I would recommend the...
    view full answer...
  • Will the Carpod Walled Cargo Carrier # M2205 Fit on a 2011 Ford Edge
    The Carpod Walled Cargo Carrier, # M2205, that you referenced will work with your 2011 Ford Edge and will not require the use of a hitch extension or adapter. I have attached a demonstration video of this carrier on a 2013 Ford Edge for you to check out. The Edge in the video is the non Sport model and has the Draw-Tite Class III Trailer Hitch, # 75992, installed. Keep in mind, the hitch pin and clip are sold separately from the Carpod carriers. For a standard pin and clip, you can use...
    view full answer...
  • Which Draw-Tite Trailer Hitch Receiver Fits a 2013 Ford Edge SEL with Dual Exhaust
    The Draw-Tite Trailer Hitch Receiver # 75728 is for the Ford Edge Sport and will not fit your 2013 Ford Edge SEL. On you SEL model instead you need Draw-Tite # 75992. It is designed to fit models with dual exhaust. I've attached a picture of the hitch on an SEL with dual exhaust that I found in the install details. I've also linked the install details and an install video for you. If you're going to be towing with your Edge the wiring harness to fit is # 118515. It plugs into the...
    view full answer...
    Image 1 for
  • What Is the Difference Between the Curt Hitch and the Draw-Tite Hitch on a 2010 Ford Edge
    Both the Curt Hitch # C13067 and the Draw-Tite Hitch # 75992 are custom fit hitches that are designed to be mounted on to your 2010 Ford Edge. Both hitches are Class III rated and have the 2 inch opening at the hitch. Both the Curt and Draw-Tite Hitches have a gross trailer weight rating of 4,000 lbs and a maximum tongue weight of 400 lbs. Both the Curt and Draw-Tite Hitch have limited life lifetime warranties. Of these two, I recommend the Draw-Tite hitch over the Curt for two reasons....
    view full answer...
  • Trailer Hitch Recommendation for 2013 Ford Edge
    You will need a new for your 2013 Ford Edge as there isn't a way to install a hitch from an older Escape on it. The vehicles are quite a bit different. For that you would want the Draw Tite # 75992 which is a confirmed fit and would work great. It's a 2 inch hitch with plenty of capacity plus a concealed cross tube.
    view full answer...
    Image 1 for
  • Hitch Recommendation for a 2007 Ford Edge
    Yes, the Draw-Tite Hitch part # 75992 that you referenced has been confirmed to fit your 2007 Ford Edge so I would recommend it for you. I attached an install video that shows this hitch being installed on a 2008 Ford Edge for you to check out. For trailer wiring you would want the part # 118551. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
    view full answer...
  • Trailer Hitch Comparison For 2014 Ford Edge Or 2014 Ford Edge Sport
    I did some research to find out what the difference is between the 2014 Ford Edge and the Edge Sport, and why there were different hitches available. They told me that the exhaust on the Sport model sits a bit lower than the other models, so they have manufactured hitches to accommodate the difference. If you have a Sport model Edge I recommend the Draw-Tite Max-E-Loader Trailer Hitch, part # 75728. This is a Class lll hitch with a 2 inch receiver opening. If you do not have the Sport...
    view full answer...
  • Do All Trailer Hitches For 2014 Ford Edge SEL Require Drilling
    I can understand not wanting to drill holes to mount a hitch, though the Draw-Tite # 75728 is only a fit the Sport model and will be unable to fit your 2014 Ford Edge SEL. I did double check with the manufacturer for you just to be certain. So to add a hitch to your '14 Edge SEL you will need to drill 17/32" holes in your frame rails for installation. Drilling to install a hitch is something that is pretty frequent and a lot of people do, even in areas there is bad weather, and you can...
    view full answer...
  • 2 inch Hitch Recommendation for a 2010 Ford Edge for Bike Rack
    For a 2 inch trailer hitch that would work great on your 2010 Ford Edge I would recommend the Draw Tite Hitch part # 75992. This hitch has plenty of tongue weight capacity for your bike rack and wouldn't require a stabilizer strap like the Curt does when used with bike racks. I attached an install video plus a video that shows a comparison of the hitches available for your vehicle. The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to use, and because...
    view full answer...
  • Class III Hitch For 2008 Ford Edge To Tow A Trailer With Weight Distribution
    I recommend to switch the existing hitch to the Draw-Tite instead of using an adapter because adapters cannot be used with weight distribution and they cut the tongue weight rating of the hitch in half. The only Class III hitch available for the 2008 Ford Edge that is designed for the use of a weight distribution system is Draw-Tite hitch part # 75992. The Draw-Tite hitch allows for up to 400 lbs tongue weight but the Ford Edge can still only tow up to 350 lbs of tongue weight according...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2014 Ford Edge
    For your 2014 Ford Edge the hitch you would want for towing is the Draw Tite part # 75992 which is a confirmed fit and has plenty of towing capacity. It's a 2 inch hitch which is the most popular size for towing products so it's the best choice. I attached an install video for you to check out as well. It comes with all needed install hardware as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4...
    view full answer...
  • Is the 17/32 Drill Bit Absolutely Necessary for Installation of Draw-Tite Hitch # 75992?
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 75992 does state to use a 7/16 inch drill bit in the instructions. This is engineers helping with installation instructions for precision but you are correct most people will use a 1/2 inch bit or use a Dremel tool to slightly enlarge it. We reference this at the 5:35 mark of the attached video we used a 1/2 inch drill bit for installation.
    view full answer...
    Image 1 for
  • 2 inch Draw Tite Trailer Hitch Recommendation for 2014 Ford Edge
    For your 2014 Ford Edge we have two Draw Tite hitches that have a 2 inch opening like the part # 75992 that you referenced. The # 75992 is the correct hitch if your Edge is not a Sport model. If instead you do have a Sport model you'd want the # 75728. These are Class III hitches which have 2 inch openings which I believe is what you are looking for since this is the preferred size for most people. The heat shield will need to be trimmed to install this hitch. I attached a picture that...
    view full answer...
    Image 1 for
  • 7-Way Trailer Connector Installation for 2014 Ford Edge
    You will need to hardwire in a connector, but it'll be super-easy. You'll just need to run one wire from the rear of the vehicle up to the positive battery terminal via a 40A circuit breaker. We have a kit set up just for this situation, the part number is # ETBC7L. The kit includes an adapter to convert the existing 4-pin to a 7-way. The adapter will have 4 additional wires. The blue wire and purple wire won't be needed in your situation, so you can just bundle those up our of the way....
    view full answer...
  • Will Only the Receiver be Showing on Draw-Tite Trailer Hitch for a 2013 Ford Edge
    Yes, only the receiver on Draw-Tite trailer hitch # 75992 will be visible after installation on your 2013 Ford Edge. Take a look at the picture I have included that shows the hitch installed. I have also linked the instructions for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch...
    view full answer...
    Image 1 for
  • Complete Towing Setup For 2010 Ford Edge
    Dry weight is the weight of your vehicle when completely empty with no passengers or cargo loaded. The gross trailer weight is total weight of the trailer plus the cargo loaded on it. The main two things you need to look at are your vehicle's max towing capacity and the trailer's gross weight. My research tells me that your 2010 Ford Edge has a max towing capacity of 2,000lbs, but you can verify in your owner's manual. This means you should not pull a trailer that exceeds 2,000lbs. If...
    view full answer...
  • What is the Shape of the Crosstube on a Draw-Tite Hitch for a 2023 Kia Telluride?
    Hey Tim! The Draw-Tite Hitch item # 75992 has a rectangular cross tube but it does not fit a 2023 Kia Telluride. This hitch fits the following vehicles: 2007 - 2008 Ford Edge 2009 - 2014 Ford Edge excluding Sport 2007 - 2015 Lincoln MKX For a Draw-Tite hitch that fits the 2023 Telluride you'll want item # DT32RR. This hitch also has a rectangular crosstube but also incorporates a round portion that goes over the exhaust. I attached a picture below so you can get a better look at it. ...
    view full answer...
  • Thule T2 Pro XTR Bike Rack and Hitch Compatibility on a 2007 Ford Edge
    The Thule T2 Pro XTR # TH83JV with 2 Bike Add-On # TH9036XT will work with the Draw-Tite trailer hitch, # 75992 on your 2007 Ford Edge. This setup can be converted from a 2 bike rack to a 4 bike rack and vice versa. The front 2 bike positions can be removed to accomplish this conversion. I have attached a review video of the bike rack for you to check out. The Draw-Tite hitch, # 75992, is a Class III hitch that is made specific for the 2007 Ford Edge. This hitch does require drilling,...
    view full answer...
  • Trailer Hitch Recommendation for 2012 Ford Limited with Higher Tongue Weight For Bike Rack
    For your 2012 Ford Edge Limited the trailer hitch we offer that has the highest tongue weight capacity and does not require a stabilizer strap when carrying a non-supported load is the Draw Tite part # 75992 which has a tongue weight range of 400 lbs which would be more than enough for a bike rack.
    view full answer...
  • Trailer Hitch Recommendation for a 2008 Ford Edge to Carry Yakima FullSwing Bike Rack
    I have all of the info you are looking for, but first I would recommend you go with the Draw Tite Hitch part # 75992 for your 2008 Ford Edge as it is also a 2 inch hitch confirmed to fit your vehicle but it does not have the strap requirement so you wouldn't end up having to worry about that. The distance from the center of the hitch pin hole to the furthest point out on the rear bumper is 5-1/4 inches. The Yakima FullSwing 4 part # Y02465 will fit this easily as it has a distance of...
    view full answer...
  • Flat Cargo Carrier Recommendation for a 2013 Ford Edge
    As long as you have a hitch installed on your 2013 Ford Edge like the Draw Tite Hitch part # 75992 we have cargo carriers that would work for your vehicle. We don't have a flat one with removable sides, but we do have a cargo carrier that has very short sides like the Stromberg Carlson Carrier # CC-100.
    view full answer...
  • Is There Drilling Required to Install Trailer Hitch on 2011 Ford Edge
    Actually the hitch part number you mentioned of 87604 is no longer available but for a similar hitch made by the same company we have the Draw Tite # 75992 which would fit and work well. It does have drilling listed as a requirement as all of the current hitch fits for your 2011 Ford Edge require. I attached a picture that I took from the instructions that covers this step for you to check out as well as well as an install video.
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Alan C
Test Fit:
Alan C
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Dustin K
Video by:
Dustin K
Employee Zach D
Video by:
Zach D
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<