bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
Draw-Tite

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 75082
In Stock
$159.34
Retail:$307.00
You Save: $147.66
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75082 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (223)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 75082

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Concealed Cross Tube
  • 400 lbs TW
  • Draw-Tite
  • 6000 lbs WD GTW
  • 750 lbs WD TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 400 lbs
      • Maximum TW when used with weight distribution: 750 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75082 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87161 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75082 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

225 reviews
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

Have a 2002 Ford Ranger 4x4 and what a wonderful investment, can't believe it took me so long to buy one. This bumper hitch was easy to install. Have been enjoying hooking up to my boat and taking the grand kids fishing and next purchase is a 4 wheeler to keep on hunting.



by:

Finished in stalling #87161 hidden hitch on my 2001 ford ranger xlt and I have to say it fit perfectly. The one thing that made it easier to install is lowering the spare tire, it lets you fit it better. Great product



by:

great hitch for the priceThis hitch will serve its purpose



by:

installed quickly and easily. very happy.



by:

Delivered as expected and installation was simple



by:

Very nice hitch. Free shipping was nice and it even came earlier than I expected. Site has large selection and the best support I have found. I will buy from them again.



by:
1994 Ford Ranger

Took no time at all to install, just wished my 94 ranger had pre-drilled holes. It took almost a hour overall, mostly from loosening rusted on bolts. Great product no issues.



by:

After I was able to remove one of the side bracket bolt with my hot wrench the installation went very smoothly. It looks good and I hope to get many years of service out of it. My dealings with this company was a 5 star experience



by:

I received my Hidden Hitch trailer hitchpromptly in 3 business days . Express shipping at no extra cost. The product was easily installed and instructions were as easy as 1,2,3. It was very well made and was quite stout. I would recommend this product very well and will enjoy shopping at etrailer.com again.



by:
Ford Ranger

thanks , it been a pleasure from the time i placed my order to the time i read my email. i was on lunch at work when i read my massage that my trailer hitch had been placed in my garage. it arrived on the forth day and i mounted it on the sixth day. no drilling was required and it is almost unnoticeable on my ford ranger. greeting from south carolina.



by:

This was one of the best transactionsI've ever had on an internet order.The communication was prompt & very well done .My hitch arrived on time & in perfect condition. Installation took less than an hour since no drilling was necessary. All in all I'm very happy and glad I choose etrailer for this purchase



by:
Ford Explorer Sport Trac

Great hitch! Shipped fast and I installed it in 20 minutes thanks to the very helpful video. I knew what I was doing the second I opened the box! Very steady and I hope to get lots of use out of it and I will be purchasing a hitch for my ford sport trac also. Great doing business with you guys!



by:

I received the hitch in record time. No problems until I find that I had to drill the second on each side. It seems to me that the manufacturer could punch this hole while punching the others. Everybody doesn`t have bits for this job.
Sorry, but I don`t bend and climb very well so no pictures.
BUT THE HITCH SEEMS TO BE A VERY GOOD CHOICE.



by:
2000 Ford Ranger

This product fit perfectly and mounted easily. The price was untouchable compared to other online or local sources. The videos that were available to watch on etrailer's web site were very explicit and were a great tool.
I make 30-40 online purchases a month as part of my job and the level of service that I received from etrailer can be matched by only a few and surpassed by none. I highly reccommend the product and etrailer.



by:

The hitch seemed to be stront, but the coating had some chips in it, so I bought a can of bedliner and sprayed it before installing to prevent future rust. One of the bolts stripped when I went to torque it to the 75LB spec, but it seems alright.

The only thing the instructions don't mention is that IF you have a FULL size spare, you will need to lower the spare on the cable before installing the hitch, then raise it back into place when you're done. Overall an easy install and great for the price



by:

The hitch looks stronger than I thought. Installation ,easy. I do it alone in my garage with my laptop in a side viewing your movie. The most I like is the appearance, almost invisible giving a look like if it came with it, looks like fabric. I have a home made trailer for multiple uses. Carry out mower, furniture and cutten trees. So is better carrying the trailer from the hitch than from the pick up bumper.



by:

Received hitch last week and installed over the weekend. Installed easy, as indicated on your web site. The vidio on your site was extremlly helpful in the installation. Have recommended your company to my brother, as of today.

Hitch looks good and is what I had hoped for.

By the way, free shipping was a big factor in my purchase.



by:

Just received my package, I purchased an entire package with everything needed to pull a trailer. It will be a few weeks before my stepson and I install this unit as he will be moving to Houston in the next month or so. Prices for this package was competitive if not lower than other sites and more so that local prices.

I have examined all of the pieces very carefully, the hitch itself looks to be of high quality and extremely sturdy. The delivery was within the time promised and arrived in excellent shape.

To this point I am pleased with my purchase.



by:
Ford Ranger

I researched this product before I ordered and I was not sure of what I really vibut after going on youtube and saw a video on how to install a tow hitch on my Ford Ranger I saw how simple of a job it was. I just received my hitch after 4 days and it looks like what I saw in the video. I cant wait to install it. Etrailer.com really came through on their promise and they upgraded my shipping to express and did not take long to get the product. It looks like a good heavy duty hitch and I look forward to instlling it and start using it.



by:
1993 Ford Ranger

It came within a few days of ordering. Packaged well, no shipping damage. Installation took an hour only because I had to cut the bolts to the bumper mounted hitch that was already installed. I also had to drill two holes due to my Ranger being the older model. After that it bolted right up with no issues. All the necessary hardware to install the hitch was included. Oh, yeah, it came with instructions, but who reads those!

Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/16/2025

Instructions? What are those, Anthony?!



by:
2001 Ford Ranger

I have already installed the receiver on my 2001 Ranger. Installation was easy and took about an hour. I have a 2-bike carrier that I plan to use this weekend. awesome receiver, delivered on time as promised. Thank you!



by:

This is the third time we have purchased a hitch from etrailer along with other products. Every time we have purchased from them we have been very happy. We really appreciate the helpful videos that show step by step how to install the products we have purchased. We also appreciate that they care enough to follow up and see how things are going.
We bought this to replace a Hidden Hitch that had been damaged due to and accident. The original had been on the truck for many year and served us well. We were glad to find this hitch and that it is exactly like the original. We like that, other than the receiver, the entire assembly hides up behind the bumper making for a very clean install. It is on a 2001 Ford Ranger with the Edge package. The truck has a full size spare and the hitch does fit well even with the full size spare. When you install the hitch removing the spare makes for a much easier install. The spare fits right back in place when you are done.
The hitch has been on the truck for about a year now. The finish has held up well and it does exactly what we need it to do.

Joe S. profile picture

Joe S.

3/26/2021

Still working great and has held up very well.



by:
2003 Ford Ranger

Easy to install considering it’s a 15 year old truck from MN. It’s really solid, glad I chose your hitch rather than using my step bumper.

Ken profile picture

Ken

4/29/2019

Wasn’t looking forward to spending the money, but it is a fantastic investment, it is so much more solid than the step bumper I’ve been using for 15 years, end it is also at a better height for toy on my boat.



by:

At 1st I thought this hitch had the wrng hole patter, but I discovered the big openeingh allowed for the bumper to stay bolted on while I put this over it's mounta and the opening allowed enough room to then remove the original bolt once the hutches other bolts was attached and then lock them both down with the large rectangular metal flange that was provided to cover the large hole. Worked out very nice. The hitch also tucked nicely under the bumper and doesn't stick oput much at all, along with maintaining perfect access to the spare tire. Great - Thanks etrailer!



by:
2007 Ford Ranger

Hitch seems to be built very well and strong. I have a 2007 Ford Ranger Sport and had to lower the spare tire a bit to fit the hitch when mounting but was able to put the spare back in place once the hitch was in. My only minor complaint is that the receiver box on the hitch was slightly crooked when welded on but shouldn't effect use. Good shipping time and tracking information on package.


25
225
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Recommended Trailer Hitch and Wiring Harness for 1992 Ford Ranger
    For a trailer hitch that is confirmed to fit your 1992 Ford Ranger, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75082. This Class III hitch will provide a 2 inch receiver opening and a towing capacity of 4,000 pounds, although I also recommend verifying your vehicle's capacity as listed in the owner's manual. Then for a trailer wiring harness, I recommend the Curt Vehicle Wiring Harness # C55314. This is a custom-fit harness that will install on your Ranger by connecting...
    view full answer...
  • Distance from Mounting Surface to Bottom of Draw Tite Hitch part # 75082
    Are you looking for distance from mounting location to bottom of hitch opening, top? I am not sure what you mean by C/L.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch for my 2017 Lance 1685 Travel Trailer
    I have a good solution but the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75082 is not a confirmed fit. Instead the Ultra-Fab 2" Trailer Hitch Receiver part # UF35-946403 is one that can be customized to your trailer frame and give you the 2"x2" receiver tube opening you want. Check out the video I linked for you on it.
    view full answer...
  • Does Draw-Tite Trailer Hitch 13091 Require Drilling to Install on 2001 Ford Ranger
    Thank you for the photo that was helpful; on some models of Ranger drilling is required, but based on your photo, you will not have to drill in order to install the Draw-Tite hitch you asked about, which is the following part number: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75082 Your photo shows you already have the rear hole that is needed on the frame in order to avoid drilling.
    view full answer...
    Image 1 for
  • Is Spare Tire Accessible with Draw-Tite Hitch Installed on 2003 Ford F-150
    We do have a solution for you but the # 75082 Draw-Tite hitch isn't a fit for your 2003 Ford F-150. It's for the Ranger and Mazda B Series. For your F-150 you actually need hitch # 75065 which does allow full access to the spare tire. I attached a picture so you can see it. I've also linked the installation details for you.
    view full answer...
    Image 1 for
  • 2 inch Hitch Recommendation for 2001 Ford Ranger
    We have great frame mounted trailer hitches for your 2001 Ford Ranger like the Draw Tite part # 75082 which provide a 2 inch hitch like you mentioned but we don't have any custom fit bumper mounted hitch fits for your truck so that would not be the route I would recommend.
    view full answer...
  • Is The Trailer Hitch On The Ford Ranger The Same As The Hitch On A 2004 Ford F150
    No, the trailer hitches will be different between the 2003 Ford Ranger and the 2004 Ford F-150. Both trucks have a different towing capacity, as well as a different mounting pattern up underneath the truck when installed. For the 2003 Ford Ranger I recommend the etrailer Trailer Hitch Receiver # e29AR because it has a matte black finish and we keep scratches and scuffs that you receive from towing less visible. The trailer hitch has a bolt-on installation. For the 2004 Ford F-150 I...
    view full answer...
  • Why Do Hitches Have Higher Weight Ratings When Used with a Weight Distribution Hitch System
    Many hitch receivers including the Draw-Tite # 75082 will have higher weight capacities when they are used with a weight distribution (WD) hitch system, such as # EQ37100ET from Equal-I-zer. These systems actually shift some of the trailer tongue weight (TW) forward, back onto the tow vehicle's front axle, which restores traction, steering and braking performance that can be lost when a trailer's TW pushing down on the hitch ball lifts up the front end of the vehicle. Since these systems...
    view full answer...
  • 2003 Ford Ranger Hitch Receiver Recommendation
    I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit, part # 75082, for the same reason that you mentioned. The bar of the hitch is hidden behind the bumper. This hitch receiver is a Class III receiver with a maximum tongue weight of 400lbs with a maximum towing capacity of 4000lbs. With regards to fit of the hitch receiver with your spare tire, the fit will be snug but it should install with no issues. Most of the reviews indicate that it is an easier install...
    view full answer...
  • Recommended Class III Hitch for a 2011 Cadillac SRX
    To add a class III hitch to your 2006 Cadillac SRX, I recommend the Curt Trailer Hitch item # C13050. This hitch is custom fit and bolts to your Cadillac with included hardware. This hitch has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I have linked an installation video below to help you get it set up. If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.
    view full answer...
  • 1997 Ford Ranger Hitch, Wiring, and Brake Controller Recommendation for Towing a Small Trailer
    I'd be happy to help you out! The trailer hitch I recommend for your 1997 Ford Ranger is the Draw-Tite Max-Frame Trailer Hitch Receiver # 75082 because it sits nice and snug up against the bumper for a clean looking aesthetic. To add a brake controller to your Ranger you need the T-One Wiring # 118325 for basic trailer lights, the Universal Wiring Kit # ETBC7 for a fully-functioning 7-Way and the wiring you need for a controller, and then last of all the brake controller. For a brake...
    view full answer...
  • Trailer Hitch Recommendation for 1996 Ford Ranger Splash
    For your 1996 Ford Ranger Splash the Draw Tite hitch part # 75082 is the best option as it has more than needed towing capacity, is mostly hidden, and installs easily. I attached an install video for this for you to check out as well. If you need trailer wiring too the Tekonsha kit part # 118325 is very easy to install and very reliable.
    view full answer...
  • Does Bumper Have To Be Removed When Installing The Draw-Tite # 75082 On A 1996 Ford Ranger
    To install the Draw-Tite Class III 2 Inch Hitch, part # 75082, on your 1996 Ford Ranger you do not need to completely remove the bumper. The bumper is held on to the vehicles frame by two bolts on each side of the vehicle. When installing the Draw-Tite you will remove the rearmost bolt on each side of the bumper bracket and use that hole and an existing hole located in front of the bumper bracket for installation of the Hidden Hitch. The hitch will end up being installed on top of the...
    view full answer...
  • Hitch Hardware Replacement Recommendation for 1994 Ford Ranger
    You will need the part number # RHK actually. On the product page for it you will need to select the manufacturer of the hitch as Draw Tite and enter the part # 75082 and we will ship you out the correct install hardware. The part # 01685 would not fit hitches for a Ford Ranger.
    view full answer...
  • Choosing a Trailer Hitch for 2004 Ford Ranger with Full Size Spare Tire
    We have trailer hitches for your 2004 Ford Ranger that are designed to fit a full size spare tire, but unfortunately Draw-Tite does not provide a list of what size spare tires will and will not fit to determine if your P225/70-15 size spare tire will work with the Draw-Tite # 75082 trailer hitch. To be certain that the hitch will not interfere with your spare tire, a Curt Class III Trailer Hitch, such as the Round Tube # 13138 or the Square Tube # 13019, will be the best option as these...
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 1998 Ford Ranger Flareside
    Reese and Draw-Tite are the same. Same parent company, design, everything but the sticker. I recommend Draw-Tite trailer hitch # 75082 for your 1998 Ford Ranger Flareside. This hitch was designed for vehicles with the factory installed step bumper. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise...
    view full answer...
  • What Years and Models of Ford Rangers Does Draw-Tite Class III Max Frame Trailer Hitch # 75082, Fit
    The Draw-Tite Class III Max-Frame Trailer Hitch Receiver, # 75082, will fit the following Ford Rangers: 1998 - 2010 Ford Ranger 1983 - 1997 Ford Ranger, All except GT models I have included a link to the installation details below. I have also included a link to all of the trailer hitches that will fit a 1997 Ford Ranger (none fit the GT model).
    view full answer...
  • Hitch Recommendation for a 1998 Ford Ranger
    I spoke to my contact at Draw Tite and the hitch part number 75090 that you referenced has long been discontinued but it was a fit for Explorers, Mountaineers, and Navajos. It would not be a fit for your 1998 Ford Ranger. The 75090 was replaced by the # 75096. For your vehicle you would want the part # 75082 instead as it has been confirmed as a fit for your Ranger. I attached an install video for you to check out as well.
    view full answer...
  • 2003 Ford Ranger FX4 Trailer Hitch Compatibility with P235/70R16 Spare Tire
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13138 for your 2003 Ford Ranger FX4 will allow the 235/70-16 spare tire to fit. Other styles for this truck like the Draw-Tite Max-Frame # 75082 will not allow for that spare tire fit.
    view full answer...
  • Parts Needed to Tow a Trailer With a 2003 Ford Ranger
    Yes, your 2003 Ford Ranger can tow a trailer. You will want to consult your owner's manual for the Tongue Weight (TW) capacity and Gross Trailer Weight (GTW) capacity of your Ranger. These are the things that you will need to look at when looking at trailers to tow. There isn't really a maximum length that you can tow because it is based off of the weight of the trailer. I recommend going with the Draw-Tite Max-Frame Class III Trailer Hitch Receiver # 75082 which has a 4,000 lb max trailer...
    view full answer...
  • Overall Width of Draw Tite Trailer Hitch # 75082
    I checked with Draw Tite and the overall width from the outside of one mounting bracket to the outside of the other on the hitch part # 75082 is 32-1/2 inches. Front to back it measures 16-1/2 inches also. This fits: 1994 - 2010 Mazda B Series Pickup 1983 - 2012 Ford Ranger 1986 - 1989 Ford Ranger excluding GT
    view full answer...
    Image 1 for
  • 2011 Subaru Tribeca Hitch and Wiring Recommendation
    The correct hitch for your 2011 Subaru Tribeca is the Curt Trailer Hitch Receiver part # C13069. This is a custom fit hitch designed specifically for your vehicle. It offers the very versatile 2" reciever tube opening which is compatable with all types of hitch mounted accessories for you to use. Should you have the need to haul a trailer you will need wiring and a ball mount. For this I recommend the Curt T-Connector Vehicle Wiring Harness part # C55370 which is also a custom fit part....
    view full answer...
  • Trailer Hitch For A 2022 Kia Sorento SX Prestige AWD
    The etrailer Trailer Hitch Receiver # e28AR is confirmed to fit your 2022 Kia Sorento SX Prestige AWD. The trailer hitch has a bolt-on installation - with no welding required. It has a matte black powder coat finish which is over a protective base coat that offers a superior rust resistance. This hitch offers an extra coating of rust resistant paint which will help it withstand the elements better then the other hitches. The trailer hitch has a maximum tongue weight up to 600 pounds. The...
    view full answer...
  • Will The 75082 Trailer Hitch Receiver Fit a 2018 BMW X1?
    We carry trailer hitches for your 2018 BMW X1 but the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75082 fits 1986-2012 Ford Ranger Pickups and 1994-2010 Mazda B Series Pickup trucks. My recommendation for your BMW is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13303 because of the quality and ease of installation compared to other options. I've attached an installation video to assist. If you will be doing any towing this this trailer...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<