1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24871
lowest price pledge
Retail:$236.98
Our Price: $150.41
You Save: $86.57
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 27 lbs
Quantity: 
In Stock
24871 - 1-1/4 Inch Hitch Draw-Tite Trailer Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24871 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (35)
  • Q & A (35)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24871

  • Draw-Tite
  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24871 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60288 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24871 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24871

Average Customer Rating:  4.8 out of 5 stars   (35 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 24871
by:

Love it. The hitch lined right up. Pretty easy to put on, about 40 mins to put on. The bike rack, same results. Thanks etrailer, leaving for the beach Saturday with our bikes. Yeppie 150456


Comments
Its working out great, no problems.
Rob - 09/10/2015

14834

- 24871
by:

Easy instalation directions pretty much spot on . Wiring was real nice. Fast delivery great service e 844683



- 24871
by:
2012 Chrysler 200

Excellent price and free shipping came within 3 days. Easy to install and I'm not a professional. Anyone can install it. Just wish I would have got a ball mount included or a package deal at least. 782734



- 24871
by:

Quick ship and delivery snd easy to in stall!! 774964



- 24871
by:

Installed easily, my bike rack functions perfectly! Thank you! 771138



- 24871
by:
Chrysler

I am very happy with this hitch! It is installed on my Chrysler 200 Limited hardtop convertible. I bought a utility trailer to haul things and now I don't have to beg/borrow for a pickup truck. I also bought a bike rack to go in it. Very nice and convenient. 750189



- 24871
by:

Always excellent service an video to help with installation. I can’t imagine buying trailering products from anyone else. I have also had etrailer price match on the rare occasion that hat they were higher in price. I couldn’t possibly recommend a business or their products more. 629308



- 24871
by:
2008 Chrysler Sebring

Got the hitch in record time and was able to install it with in 3/4 of an hour and I am not a mechanic. Thank You 610101



- 24871
by:
2011 Chrysler 200

All is good with the install. The feed wires to feed the bolts into the frame could be a little longer. Difficult to feed through the frame 585101



- 24871
by:
2014 Chrysler 200

everything was great, however getting the bolts into the frame is very hard and myself and my helper are considered very good at handyman projects 564005



- 24871
by:
2008 Chrysler Sebring

I received my hitch on Friday night , started instillation Sat. am , it was as easy as the instructions say to do , had tools 2 19mm sockets , in all it went as planned , 4 bolts . i can't say enough about etrailer, very good product , fast delivery , good price !! Now i can haul my bike every-where !!! Thank You Very Much 558253



- 24871
by:
2008 Chrysler Sebring

Outstanding! I got the products way faster than expected. Hitch went on very easily. If you are mechanicallying inclined the job goes well. Really pleased with the fishing wire that was provided. Goes well if you fish the coiled end through rear hole pushing forward, but I was not happy with electrical wiring diagram. Leaves a lot to be desired. I have electrical background and found it difficult to understand. Also, you have to cut through the rubber grommets to feed new plugs to lights, not happy about that, but overall I am happy with the service and thank you 557092



- 24871
by:
2014 Chrysler 200

Perfect. Easy to install, and not cumbersome or in the way. 517493



- 24871
by:
2008 Chrysler Sebring

I Purchased trailer hitch from e trailer.com The website was very helpful to select the right part I need for my car Delivery was faster then expected Website even provide video how to install Im planing to install it by myself next week Thanks to etrailer.com 515751



- 24871
by:
2008 Chrysler Sebring

Everything I ordered was perfect thanks so much see you on my next project 514830



- 24871
by:
2013 Chrysler 200

Fits well but did not have the pin for the receiver extension. I purchased both extension and hitch from this site and would have figured it would be complete. 504613


Comments
This hitch requires the use of ball mount # 3594
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
$27.55
, and that includes a pin and clip. I see that you ordered ball mount # C45522
Curt Class II Drawbar - 3-7/8" Rise - 11-1/4" Long - 3,500 lbs
$37.02
and a pin and clip is not included with that, but it is available as part # F-4
Curt Class I and II Pin and Clip - 1/2" Diameter
$6.37
.
-- Rachael H - 05/07/2018

38227

- 24871
by:
2014 Chrysler 200

No major problems with the installation. Jacked car up and used Jack stands, no lift. I did not drop my exhaust and had no problems. Definitely watch the video of guy installing the bolt with the fishing wire. Not so hard if you see it on the video. W/out the video, I would have been in trouble. Will use to pull small boat. Overall not as hard as I thought. Have not used it yet, wire kit is next. 489010



- 24871
by:

The hitch has provided good service. The nut tightness must be checked periodically as they can become loose. Lock nuts would prevent this. 459125



- 24871
by:

Easy install perfect fit. 455309


Comments
Still working fine. No problems. Great, will do business again.
ehwa - 11/30/2018

46209

- 24871
by:
2008 Chrysler Sebring

Exactly as described, FAST shipping and EASY install. In my case, I had to use an extension as my trailer was too close to the bumper but otherwise a perfect hitch! 422227



- 24871
by:

fast shipping, very easy to install. great quality, and works great mainly was bought for a Bike rack. Perfect. .keeps bikes away from car 365688



- 24871
by:

Both the Draw Tite Hitch and the Swagman XC2 Bike Rack are great products. Easy to put together, install, use and take off. Very sturdy. 361347



- 24871
by:

First of all Great customer service, very helpful when ordering my hitch Second Very quick shipping, with a tracking number, so you know the arrival Third Very easy to read instructions, made my installation easy, took 20 minutes, with just a couple tools Fourth You can't beat their prices Just a great experience ordering through Etrailer Thanks again for making this experience great 334833



- 24871
by:
2013 Chrysler 200

Rarely do I write reviews but this deserved one. I bought the drawtite hitch (24871) and the swagman xtc-2 bike rack. I thought mounting the hitch would be a royal pain... not at all. Probably took a total of a 1/2 hour. Went on etrailer.com and watched a video that clearly showed what to do. Same thing with the bike rack. Both seem well built, all hardware was included. and all the holes lined up!! (that is rare). The online help at etrailer.com was excellent and I will order from them again. Thanks! 283875


Comments
its been a year and i still love the hitch and the bike rack. i can throw on the rack and have my bikes ready to go in minutes. i have recommended it to many people. Just used it this past weekend!
dean l - 08/15/2017

27187

- 24871
by:
2010 Dodge Avenger

I am very happy with this hitch , sturdy construction , ease of installation , I would highly recommend this to anyone 277520


Comments
The hitch and rack are used quite often and are still trouble free.
Kevan B - 12/29/2017

32384
25
35
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch

  • Trailer Hitch Recommendation for a 2012 Chrysler 200 Convertible
    There is a confirmed fit for a 2012 Chrysler 200 convertible and it is Curt Hitch # C11133. The Draw-Tite hitch is not yet a confirmed fit. The Curt hitch comes with the correct ball mount, hitch pin, and clip. For a ball you can use # 19256 for 1-7/8 inch diameter or # 19258 for a 2 inch diameter. For trailer wiring, use T-One Vehicle Wiring Harness, # 118550. I have included a link to the installation instructions for the hitch and for the wiring harness for you.
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2014 Chrysler 200 Limited
    Yes, the Draw-Tite trailer hitch # 24871 will fit your 2014 Chrysler 200 Limited. It will fit all models including the convertible models. If you plan on doing some towing please first consult the owners manual to determine the towing capacity of the vehicle. For a ball mount use # 3594. And for a 1-7/8 inch ball use # 19256. For a 2 inch ball use # 19258. For trailer wiring you can use # 118577. I have linked the installation instructions for the hitch and wiring and a video showing...
    view full answer...
  • Does Draw Tite Hitch # 24871 Fit 2012 Chrysler 200 with Dual Exhaust
    We've spoken with Draw Tite before about their # 24871 hitch and it fits just fine on versions of your 2012 Chrysler 200 that have dual exhaust tips so this hitch would work well for you. I attached an install video for this hitch for you to check out as well.
    view full answer...
  • Trailer Hitch and Bike Carrier for a 2008 Chrysler Sebring Hard Top Convertible
    At the time the question you are referring to was answered the hitch # 24871 was listed as a fit for all models of the 2008 Chrysler Sebring. As you have found that has since changed rendering that answer irrelevant so I thank you for finding it and bringing it to my attention. Draw-Tite and Hidden Hitch are sister companies so hitch # 24871 and 60288 (discontinued) which DO fit the convertible are basically identical. They even share the same instructions. The difference is that the...
    view full answer...
  • Trailer Hitch Receiver and Bike Rack for a 2010 Chrysler Sebring Convertible
    You'll need a couple things to tow, the first of which is a hitch. For the 2010 Chrysler Sebring, the Draw-Tite Class I Sport Frame, part # 24871 is a confirmed fit. It has a no-drill installation process, so it should be easy for you to install. I've included a video of it being installed on a 2008 Chrysler Sebring soft top convertible, so you can get an idea of the installation process. If you're going to be towing a trailer with the Sebring then you'll need trailer wiring as well....
    view full answer...
  • Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2010 Chrysler Sebring Convertible
    The Curt Trailer Hitch Receiver # C11081 is confirmed to fit the 2010 Chrysler Sebring sedan but not the convertible model. For the convertible use Draw-Tite # 24871 that is confirmed to fit. If you're going to be towing a trailer with the Sebring then you'll need trailer wiring as well. Use # 118444 which plugs in behind both tail lights. Also the recommended ball mount is the Draw-Tite # 3594. It gives you 4 inches of rise. The compatible hitch ball is # 19256 for a 1-7/8 inch...
    view full answer...
  • Trailer Hitch and Wiring for a 2008 Chrysler Sebring Convertible with Dual Exhaust
    Draw-Tite trailer hitch # 24871 will fit your 2008 Chrysler Sebring convertible with dual exhaust. It can be used to tow a rental trailer. The hitch has a 2,000 pound gross trailer weight capacity but check the vehicle owners manual to the Sebring's capacity and go by whichever is lower. You will need the proper ball mount, part # 3594. To add a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118444 to add a 4-Way flat connector. I...
    view full answer...
  • Will Draw-Tite Hitch 24871 Fit the 2013 Chrysler 200 and Work With a 2-Bike Class I Hitch Carrier
    Draw-Tite Hitch # 24871 is indeed a correct fit for your 2013 Chrysler 200 with dual exhaust. This light-duty Class I hitch fits both sedan and convertible models. With this 1-1/4-inch installed (it bolts into place - no drilling and no welding) you can use a compatible 2-bike Class I bike carrier. Do please note that Class I hitches can only handle the load of 2 bikes, even if the carrier itself can hold more. The linked article on hitch classes will explain in detail. I have also...
    view full answer...
  • What is the Towing Capacity of a 2009 Chrysler Sebring with 2.4 Liter 4 Cylinder Engine
    I found an owners manual online for the 2009 Chrysler Sebring and found that the vehicles with the 2.4 liter engine can tow up to 1,000 pounds gross trailer weight and 100 pounds tongue weight. The towing section starts on page 338 in the manual. This does limit what you can tow quite a bit so I do recommend a different towing vehicle since you will not get much of a camper under 1,000 pounds. If you do plan on towing with this vehicle then you can use hitch # 24871. The recommended...
    view full answer...
  • Trailer Hitch and Wiring for a 2012 Chrysler 200
    Draw-Tite trailer hitch # 24871 for the 2012 Chrysler 200 is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. Provided that the trailer is within that capacity as well as the capacity of the vehicle then it will be able to tow it. The recommended ball mount for this hitch is # 3594. For a compatible 1-7/8 inch ball use # 19256 or for a 2 inch use # 19258. And for a trailer wiring harness you can use # 118577 to add a 4-Way flat connector to the rear of the vehicle.
    view full answer...
  • Is There a Class II Trailer Hitch Receiver Available for a 2008 Chrysler Sebring Convertible
    The only trailer hitch receiver option for your 2008 Chrysler Sebring Convertible is the Draw-Tite Sportframe # 24871, which is only a Class I hitch. Due to the design of your Sebring, there are no Class II options available. This trailer hitch has a Gross Trailer Weight (GTW) of 2,000 lbs and a Tongue Weight (TW) of 200 lbs. I checked an online version of a manual for you Sebring and if had the same weight capacities that this hitch has, but you will want to check your copy of the owner's...
    view full answer...
  • Lowering Exhaust and Using Fishwire to Install a Trailer Hitch on a 2013 Dodge Avenger
    First, to lower the exhaust, the first thing that our installers do is hang a support strap from one side of the vehicle to the other side to support the exhaust once it is off the hangers. To get the exhaust off of the rubber hangers you will need to spray them down with some lubricant like WD40. Then you can use a small pry bar or other flat tool to push the exhaust off the rubber part and then let it rest on the strap. To use the fish wire you will just thread the bolt onto the end,...
    view full answer...
  • Is Temporarily Lowering the Exhaust Required to Install a Trailer Hitch on a 2008 Dodge Avenger RT
    The Draw-Tite Trailer Hitch, # 24871, will fit on your 2008 Dodge Avenger RT. You will have to temporarily lower the exhaust to install any of the available hitches for your vehicle. Lowering the exhaust is not as difficult as it might seem. You would remove the exhaust hangers on both sides and the exhaust will just hang there while you install the hitch. I have included a link to the instructions below. I have included a video in which one of our installers uses a strap to support the...
    view full answer...
  • Hitch and Wiring Recommendation for a 2008 Chrysler Sebring Convertible
    First let's start with a hitch. For that I would recommend the Draw-Tite part # 24871. You will need the recommended ball mount, part # 3594. For trailer wiring you would want the # 118444, and then for a hitch ball you would want either the # 19256 or # 19258.
    view full answer...
  • Trailer Hitch Availability for 2013 Dodge Avenger R/T with Dual Exhaust
    We do have several choices for you in a 1-1/4-inch Class I hitch for your 2013 Dodge Avenger R/T with Dual Exhaust. These can be seen on the link provided for you. I checked with my technical contact at Hidden Hitch and Draw-Tite and your dual exhaust R/T is fully compatible with these light-duty hitches. If your intended use for the hitch is to install a bike carrier, then the hitch I suggest is the Draw-Tite # 24871. Unlike the Curt model # C11133 this hitch does not require you to...
    view full answer...
  • Trailer Hitch and Wiring Harness Recommendation for 2013 Chrysler 200
    To be able to transport your Permobil C300 electric wheelchair with your 2013 Chrysler 200 convertible, I recommend installing a trailer hitch and wiring harness on your vehicle and using a mobility chair trailer. The trailer hitch I recommend for you is the Draw-Tite Class I Receiver Hitch # 24871. The recommended drawbar for this hitch is # 3594. A hitch ball compatible with the trailer coupler will be needed as well. You can use # 19256 for a 1-7/8 inch diameter ball, or # 19258...
    view full answer...
  • Trailer Hitch and Wiring for a 2013 Dodge Avenger SXT
    Yes, the Draw-Tite trailer hitch # 24871 fits all models of the 2013 Dodge Avenger including your SXT. I have included a link to a video showing installation. The model in the video has single exhaust but installation for dual exhaust models would basically be the same. If you plan on doing any towing then the correct ball mount to use is # 3594. For a 1-7/8 inch ball you can use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # 118577. If you want to use the...
    view full answer...
  • Bike Rack to Carry 3 bikes with a 2014 Dodge Avenger R/T V-6
    For your 2014 Dodge Avenger R/T there are only Class I hitches available. Which as you have already determined means that you cannot carry more than 2 bikes on a rack installed in the hitch. One way around this is to use a 3-bike trunk mounted rack like the Thule Raceway part # TH9002PRO. This rack has been confirmed as a fit for your vehicle and will allow you to carry up to 3 bikes. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may...
    view full answer...
  • Bike Rack That Will Clear Bumper on 2013 Dodge Avenger
    There are a number of bike racks that will work with your 2013 Dodge Avenger, but the center of the hitch pin hole to the edge of the bumper is about 6-1/2 inches with the Curt Trailer Hitch Receiver # C11133. This distance is too far to use the Inno Aero Light 2-Bike Rack # INH620, because it is 6 inches from the hitch pin hole to the closest edge of the carrier. The Draw-Tite Trailer Hitch # 24871 which fits your 2013 Dodge Avenger measures about 5-3/4 inches to the edge of the bumper,...
    view full answer...
  • Recommended Bike Rack and Trailer Hitch Receiver 2012 Chrysler 200 Convertible
    We have two trailer hitch receivers for your 2012 Chrysler 200 Convertible, the Draw-Tite Class I Sport Frame Receiver Hitch part # 24871 and the Curt Class I Receiver Hitch part # C11133. Both of these hitches are a Class 1 hitch receiver with a 1-1/4" receiver tube opening. I recommend the Draw-Tite hitch as your best option due to its sleek appearance after installed. As long as your current bike rack has a 1-1/4" receiver tube opening and is compatible with a Class 1 hitch receiver,...
    view full answer...
  • Availability of Trailer Hitch Receiver for Towing with 2008 Chrysler Sebring Hard-Top Convertible
    We do offer two light-duty Class I trailer hitch receivers for the 2008 Sebring hard-top convertible and both can be seen on the link provided. The hitch # 36448 that you referenced is not a fit for your convertible, only for the sedan version of the Sebring. The correct Draw-Tite hitch is # 24871. I have linked an installation video for your reference as well as the written instructions. Please note that according to a Chrysler Corporation document I located online not all versions...
    view full answer...
  • Recommended Trailer Hitch Receiver and Cargo Carrier for 2011 Chrysler 200
    For your 2011 Chrysler 200, we have a confirmed fit for both the Draw-Tite Sportframe Trailer Hitch Receiver # 24871 and the Curt # C11133. The Draw-Tite hitch will be recessed too far under your bumper for a cargo carrier, so I recommend the Curt hitch which will require stabilizer strap # 18050 and has a measurement of 4-1/2 inches from the center of the hitch pin to the outermost part of the bumper. You will simply need a Class I rated cargo carrier with the closest part of the rack...
    view full answer...
  • Trailer Hitch Availability for 2008 Chrysler Sebring V6 Convertible
    We do offer a light-duty 1-1/4-inch Class I trailer hitch for your 2008 Chrysler Sebring V6 Convertible, part # 24871. Please note that the part you referenced, Draw-Tite Class II hitch # 36448, is a fit only for the sedan, not your convertible. If a bike rack or cargo carrier are in your plans please note that you must use a Class I-rated bike rack or cargo carrier. A Class I hitch is limited to carrying two bikes only - even if the rack holds more. Links are provided for both Class...
    view full answer...
  • Trailer Hitch Recommendation for a 2008 Chrysler Sebring Convertible
    I would recommend going with the Draw-Tite Trailer Hitch, # 24871, for your 2008 Sebring Convertible, see included instructions. For a cargo carrier I would recommend the Curt Cargo Carrier, item # C18145, which is a 17 by 46 inch carrier that fits a 1-1/4 inch hitch receiver. I've attached a video of this carrier for you. If you would like to complete a towing setup you can use the T-One Wiring Harness, item # 118444, and a properly sized ball mount and hitch ball. If your trailer...
    view full answer...
  • Recommended Bike Rack for a 2008 Sebring Convertible
    You are correct the Draw-Tite 1-1/4 inch hitch # 24871 will be a great choice for your vehicle. I can help you with choosing a bike rack. I would highly recommend the Thule 2-Bike Helium # TH9042PRO. The distance from center of hitch pin hole to back of upright mast is 14-3/8 inches, see linked image. This would certainly be enough clearance for the convertible top to be opened or closed with the bikes loaded and without having to tilt the bike rack away from the vehicle. The Helium...
    view full answer...
  • Installation and Operation Instructions for the Curt Stabilization Strap on a 2013 Chrysler 200
    I can help show you a little better what this strap will look like when installed on your vehicle. While there is no specific video to your 2013 Chrysler 200, I do have two videos that demonstrate the stabilization strap # 18050 be used with the non-trailer loads, which are going to be most commonly bike racks and cargo carriers. The Curt hitch # C11133 is a confirmed fit for your 200, but if you would rather not use a strap, like most customers don't when setting up your accessories,...
    view full answer...
  • Selecting Correct Ball Mount for Use with Class II Hitch on 2010 Dodge Avenger
    Your 2010 Dodge Avenger can be fitted with either a light-duty 1-1/4-inch Class I hitch like Draw-Tite # 24871 or a higher-capacity Class II type like # 36448. If you have a Class I hitch you need to use the recommended ball mount shown on the hitch page, but if you have a Class II hitch like # 36448 you can select a compatible Class II ball mount with the specific amount of height rise or drop you need to keep the hitched trailer level and with the length you need for good clearance between...
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Sue W
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
David F
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.