To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your Chevrolet S-10 Pickup's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation , Requires temporary removal of bumper/fascia during installation , Does not fit models with rollpan bumper
Average Customer Rating: 4.9 out of 5 stars (76 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.This is a very well made product, it is nicely powder coated and shiny, looks like it will last for many years! It's heavier than I expected which is a plus, they certainly made it extremely strong, I highly recommend etrailer hitches!
Looks great, nearly hidden and very low-profile. Went on easily, installed myself in about 45 minutes. I used a milk crate on a small furniture dolly to move the bumper out of the way and hold it up so I could align the hitch and bumper bracket holes and bolt them up. Did I say PERFECT fit, first try! Thanks again, eTrailer !! Now this one-owner, low mileage pickup's 4.3L Vortec and 4L60-E can be used as intended--to haul some serious trailer weight (truck is rated to tow 5900 lb. with weight distribution). The new hitch will also serve as a bike carrier platform when not pulling trailers around.
I recently purchased a Curt hitch for my GMC Sonoma through etrailer. Got it in 2 days in perfect condition and installed it with ease the 3rd day. Could not be happier with my purchase.
Jeffrey T.
1/16/2022
I bought Curt hitch for my GMC Sonoma a year ago. Installation was a breeze. I have towed my boat and some construction without a problem. Great product.
Followed directions included.Everything went together correctly.Fits good looks good.Thank you for an excellent shopping experience from website to delivery to follow up on product!
Kurt
2/19/2019
still working great
Now I can haul my four wheeler on a trailer. Hitch went on no problem with a little help from my grandfather. Comparing hitch videos really helped a lot. Quick turnaround,Good price thanks a lot etrailer.
Outstanding fit is great you really cannot tell where the bumper stops and the hitch begins. I am very satisfied with the whole process Thank you
Hitch went on with no problems. All holes lined up correctly and it cane with new hardware. I'm pleased with the product
installation was easy and fast. This is a great product and highly recommended this brand.
Watched install instructions on YouTube. Easy, took just a short time & done. Thanks
Perfect fit! It took only about an hour to put the hitch on. Very easy installation.
My truck is 1999 Chevy S-10 Long bed. This may apply to other S-10 pickups.
You don't have to drill the hitch. You do have to drill the frame and bumper brackets. The supplied bolts are 1/2 inch grade 8 bolts. The original bolts holding on the bumper are 12mm. The 1/2 inch bolts will not go through the original bumper and frame holes without drilling them out to 1/2 inch. If the description has said this, my review would have been a 5 star review.
I took them at their word and went to a public garage to install the hitch (it was a cold and I don't have a garage). When the bolts did not fit, I had to put my truck back together and go home for a drill. Then go back to the garage to complete the installation.
Other than the minor glitch above, the install was painless and looks great.
Jenny N.
2/22/2022
You mentioned that you needed to drill and I wanted to ask you a few questions. How many of the holes did you need to drill? Can you confirm that you have a factory step bumper verus a roll pan bumper?
Arthur
2/22/2022
I have the original factory step bumper. The website clearly said the hitch I ordered will NOT work with a roll pan bumper. Yes, I read the whole listing. I did not know what a roll pan bumper was, so I had to google it. I had to drill out 12 holes total. Three holes in each bumper bracket and three in each frame rail. Two bumper brackets and two frame rails. The original bolts were metric 12 millimeter. The Grade 8 bolts that are provided with the hitch are one half inch bolts. 0.5 inches is equal to 12.7 millimeters. They would not fit through the holes for the original bolts. Each hole in the bumper brackets and the frame rails had to be drilled out. Drilling the holes out was easy. Not having a drill with me was a problem because the website said NO DRILLING needed. I was not prepared. It was a cold day, so I went to a Public Parking Garage and did the installation in the basement level to be out of the wind. If I knew I needed a drill and had taken one with me, it would have been 5 more minutes. I had to put my truck back together, go home and get a drill and come back to the garage. This added an hour to the install. I am not upset about this and it will not keep me from buying from etrailer again. If you want a 5-star review, then your instructions need to be accurate. If you want a picture of the install, let me know and I will send you one.
Jenny N.
2/22/2022
I will send this information to the manufacturer for review. This is the first time that we have had a 1999 Chevy S-10 pickup with the factory bumper have bigger hole locations then one half inches.
Very sturdy. Took me a lot longer than 45 min to install but pretty simple. Mine was about 1/8 inch short but would slide in with some persuasion and the snug fit made the alignment easy. I have had the square Draw Tight hitches before and I much prefer the look of this tubular design.
John C.
5/13/2021
No problems tows well and even heavy loads dont loosen the hitch
Installation was easy with the instructions.
No problems since installation. Everything works perfectly. Greatly Satisfied!
Richard M.
8/22/2022
I works great! I have had no problems what so ever. Great product.
The transaction was simple. The hitch arrived in a timely manner and just when they said it would. The product was made by a company with a good reputation. The price was very competitive.
Thomas B.
6/9/2020
I expected it to be good quality it is. Anyone with average mech. ability and tools should be able to install it. I am pleased with the purchase.
Product was as stated and worked perfectly fine.
I'm very happy with the trailer hitch.
Walt K.
7/27/2021
Works great. No modifications needed
Hitch came in slightly narrow in width. At first i thought it was made wrong. After a little thinking time I realized it was bumped in shipment. I called etrailer and they told me it was the right hitch. I used a little effort to spring it open an it was and easy effort to install it. I am well please with price, quality and service.
Thank You etrailer
The install was fairly easy. I sprayed the bolts with penetrating oil a week before the install and they came off easily. The only issue was that the width of the trailer hitch was 1/2" to narrow ( it must have moved while it was being welded) so I had to use a rubber mallet to widen the hitch. After that every thing went smoothly. There were a few scuffs on the hitch when it arrived.
Great fit, smooth installation with no hassles.
Only one issue with the installation being that one of the bolts/nuts stripped when torquing to the required specifications.
George D.
2/22/2020
I used my hitch to haul my own trailer from Minnesota to Tennessee, fully loaded and then returned and hauled a UHaul trailer, also fully loaded to Tennessee with no issues at all. Great product and perfect fitment. Thanks
Great fit and finish, install was easy enough. One issue seems to be the receiver is under the bumper a few inches so an extension will be needed for a lot of hitches. It does look nice recessed back and it let’s you still use a ball in the bumper if for some reason you want to do that.
This hitch has been great. Installation went easier than expected. I have pulled trailers many many times and have also used a receiver mounted carrier rack in it. I’m so glad I purchased this.
It fit very well, well made, strong. The connections for electrical were straight forward and plugged right into my truck. No splicing, or cutting. I love it, I would recommend this product to anyone in need of a hitch
The Curt receivers I purchased for my 94 S10 and my 2020 Kia Sportage only took about 30 min each to install and both fit perfectly. The wiring harness for the Kia took about 90 minutes to install only because of all the internal plastic paneling that must be removed to run the harness. The S10 harness took 5 minutes to install. Great products and fast shipping.
Product was delivered on the day promised. The hitch fit the old S-10 perfectly. I had the bumper already off and the bolts out. Hitch installed in 10 minutes. Hopkins light kit installed in one minute. Electric impact wrench really helps on breaking the old bolts loose and tightening up the new ones. Five stars in every category.
great hitch, fits great. Got this hitch for my 2003 sonoma pick up. Needed a better hitch to tow my pontoon boat. Now have 2 draw bars, one 2" ball for one trailer and 1 7/8" for other trailer . Don't have to keep changing the ball.
My order came very quickly. The quality of the receiver hitch is very well built. It seemed to attach to my 2002 GMC Sonoma pretty easily. The only thing was that we had to drill out the holes in the frame of the truck to fit the bolts that came with the receiver. Other than that, it went on easy.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sunnysdca2003s10
11/19/2021
**Update: One year later: Zero issues with this simple, install-and-forget-its-there hitch! Now a permanent part of the rear bumper and cant imagine the truck without this truck-necessity!