Class III 2 Inch Curt Trailer Hitch Receiver to Fit a 2016 Chrysler 300C

Updated 07/17/2017 | Published 07/15/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(46)

$223.09

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(15)

$53.07

B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black

(4582)

$269.00

Blue Ox Trailer Hitch Receiver Lock for 2" Hitches

(191)

$38.05

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(73)

$197.01

Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span

(894)

$16.51

Question:

Does the Curt 2inch system fit the 2016 Chrysler 300C?

asked by: Landon

Helpful Expert Reply:

We actually have two Class III, 2 inch trailer hitch receivers from Curt that fit the 2016 Chrysler 300C. Curt # C13236 and # C13093 will work for you. I've linked a video of the # C13093 installed on a 2012 300C for you.

If you're going to be towing a trailer with the 300C you'll need a wiring harness for the trailer's lights. The Tekonsha # 118658 is confirmed to fit. It plugs in behind both tail lights then has the hot wire ran to the battery.

You'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.

One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.

For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.

I've also included links to some articles on towing that you might find helpful.