Class III Trailer Hitch with Best Ground Clearance for a 2016 Dodge Challenger
Updated 05/03/2017 | Published 05/01/2017
Products Featured in This Question
Question:
Im looking to purchase a hitch for my challenger, but i would like to know which one is most off the ground I have ordered a Curt hitch before and the 2 inch opening for the ball mount was welded under the actual hitch bar that attached to the frame. I see there are several options from Curt hitches that you guys have and on one of them, in the picture i see a round tube instead of square and that the receiver is welded straight from it. Is it true or is it just the picture for ad purposes?
asked by: Dmytro
Expert Reply:
The picture of Curt trailer hitch # C13236 is correct but that is just one design that is available for the 2016 Dodge Challenger. Hitch # C13093 has the square tube with the receiver below the cross tube. The round tube design though, # C13236, would have slightly better ground clearance than the square tube design. The receiver will basically be right beneath the bottom of the rear fascia. Please note # C13236 does not fit models that have quad-tip exhaust.
If you plan on doing some towing the recommended ball mount is # C45030. It has a 1 inch rise or 2-1/4 inch drop. For a 2 inch ball use # 63845 or for a 2-5/16 inch ball use # 63847. If the ball mount does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.
And for a trailer wiring harness you can use # 118656 to add a 4-Way flat connector to the rear of the vehicle.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Cargo Carrier With Ramp for RV to Carry Generator
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Will The EcoHitch fit a 2017 Ford Fusion Titanium AWD?
- Q&A: Ball Mount Recommendation for 2013 Chrysler 300 with Curt Class III Trailer Hitch
- Q&A: Recommended 2 Inch Hitch for a 2018 Dodge Charger
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Ball Mount for Curt Trailer Hitch on a 2018 Chrysler 300
- Q&A: Third Brake Light Stop Lamp Isolation Converter Compatible with LED Lights
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide