Valterra Bug Screen for RV Water Heater Vents - 4.5" x 4.5" x 1.3"

Video Transcript for Valterra RV Vents and Fans A10-1322VP Review

Today we're going be taking a look at the Valterra bug screen for RV's. This bug screen is going to be great for RV furnaces, water heaters and battery vents. It's very easy to install. It's made from a heavy duty stainless steel construction. It's going to do a great job at keeping our unwanted pests like nesting insects, birds, and rodents. It offers minimal air flow restriction.

It's going to include one screen, one installation tool, and two spring fasteners. Taking a look at the dimensions real quick. Going edge to edge this direction is 4 1/2 inches, other direction is also 4 1/2 inches. Then the depth, it's going to measure about 1 and 5/16ths of an inch deep. Now it's always a good idea to inspect your screens monthly and clean them when necessary to help maintain proper air flow. When you're ready to install your screen, you want to position your screen over the vent louvers and determine the best locations to install the springs. Now on the spring itself you're going to notice that one end is open.

The other end has a cross bar that runs across it. The cross bar end connects to the vent, the open end connects to the screen. Now the best place to hook this spring connector is below the louvers on the flat part of the panel, and that's of the vent. The other end of the spring is going to connect to the screen. Then you can simply use the included tool. This is going to help stretch this spring and easily hook this spring onto the vent louvers. That's going to do it for today's look at the Valterra bug screen for RV's..