Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Designed for 3" hitch receivers, this 5/8" diameter lock includes a standard flat key. Fits factory 3" hitches. Install the included 3/4" diameter adapter sleeve to use with a heavy-duty 3" Reese Super Titan hitch.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a Draw-Tite trailer hitch receiver lock. This flush-style trailer hitch receiver lock is used in place of a standard pin and clip to prevent theft of your ball mount or hitch-mounted accessory. Now, the neat thing about this is it comes with this adapter sleeve, so that we can actually change the pin diameter from a 5/8 diameter to 3/4" diameter. This is designed to work with hitches that measure up to 3"x3". Really nice design, it'll work for pretty much any hitch out there on the market. This allows you to secure your bike rack, cargo carrier, hitch cover, till bar, ball mount, and even more to your trailer hitch.
Features a traditional flat key design. Looking at nice, durable steel construction, the zinc finishing to resist rust and corrosion, and it does have the dust cap or dust cover that goes over the key slot, keeps dirt and moisture out.Again, this is designed to fit hitches with 3"x3" trailer hitch receivers. It'll also work with 2 1/2" hitches and 2" hitches. Pin diameter is 5/8", but you can convert it to 3/4" when you use the included sleeve. Unlocking is really easy.
You place a key in, give about 1/4 of a turn, that pops out, indicating that it's unlocked. You can take the barrel off, and then that's also when you can remove the included sleeve. So 5/8" diameter, or 3/4" diameter. We got a nice seal here, which protects the lock core. Again, it keeps dirt and grime out of there.
To lock it you don't have to have the key installed, so you can take this, place it on, push it down. Has that audible click so you know that it's locked, and then you place the dust cap on it. Overall length of the unit, I took a measurement from very edge to very edge, got a measurement of around 7 3/8", and then the usable pin length, or the span is 4". That's inside edge to inside edge. That's going to do it for today's look at the Draw-Tite trailer hitch receiver lock..
Average Customer Rating: 4.5 out of 5 stars (82 Customer Reviews)
Designed for 3" hitch receivers, this 5/8" diameter lock includes a standard flat key. Fits factory 3" hitches. Install the included 3/4" diameter adapter sleeve to use with a heavy-duty 3" Reese Super Titan hitch.
This hitch fits the Ford 3" hitch perfectly. I have been using it constantly for the past year and it has held up well. Still functions and looks new.
It worked well for 1 year but at the 1.5 year mark it has rusted and the lock no longer works--it accepts the key but does not engage the locking mechanism. Thankfully I was able to get it off the hitch receiver. Will need to replace it.
JUST IN TIME FOR CAMPING
Qualify product, works well. Good service, thanks Tammie
I haven't really used it yet. The hitch is great as it is fully adjustable for all height of trailers etc.
Just what was needed
Ray
12/31/2023
Working great holding up well
With Ford's better idea, lining up all of the sleeves to neck down from 31/2 to 21/4, this locked everything together very nicely. Extremely well built.
just what I wanted and got to me quick
Works very well
I have been using this hitch lock for awhile. It works well just make sure you keep it lubricated so the mechanisms work properly. I do not keep it installed on my vehicle year round, only when I need to tow. Just note that it is long and the key must be inserted in the end to work the mechanism and it pops out. This can be tedious if you have a tight space around your hitch. I have used it on both my 2018 Ram 2500 and 2019 Suburban. It is easy to use on the Ram, plenty of room around the hitch. On the Suburban it is a little more cramped. I usually hold the electric plug cover open when inserting the hitch pin to make it easier.
Would have probably been a great locking pin but it came without keys
Jenny N.
11/9/2021
Thank you for your feedback. I will have our customer service team reach out to you.
I love this product. We have had it for a year now and have used it everyday for that time. It is still currently on the back of my motorhome to secure our blue ox tow bars for our toad. Thank you so much for a great product!
same product quality and brand as the corner supply store however I did save some money. Be aware that there was no pride put into packaging the items for shipping. No packing or padding, and as I was handed the box across my new 1700.00 computer that was a week old, the trailer hitch adapter fell out the ripped side of the box and landed guess where! The most expensive adapter in history.
This lock is long enough to span the 3 inch hitches. It could be a little stronger as I have bent mine a little. Still useable.
Dean
4/7/2022
Pretty well, still working even bent.
works just fine
Great product
Well made locking hitch pin that can be used for 5/8 and 3/4 inch hitch pin diameters.
I bought this item for my 2017 f450. I could not find a good length for my pin this pin is a little on the long size my receiver measures 3 5/8” across the pin that was 3 5/8” from another company reviews said it won’t work so I went this option. Comes with a sleeve for 3/4” hole mine uses 5/8” hole just a little play side to side being too long. Pin worked great.
Still using it after a year. I feel more reassured that no one can steal my expensive hitch with the lock. Was a great investment.
It bent after just a few trips with my travel trailer, glad I caught it. Would not recommend. Trash...
Draw-Tite hitch pin works great and is well made.
Strong hitch pin !! Worked perfect for my 2020 F-250 3" hitch....
Fit as stated, liked how is had a sleeve for 3.0 hitches, I had a 2.5, so all I did was take the sleeve off and boom, perfect fit
Fits my 2019 F350 3-inch hitch perfectl y.
Just what I ordered and just what I needed for my RAM 2500
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
5/23/2023
That is not good to hear. Unfortunately, since you are passed the one year limited warranty with this item, we are unable to replace it for you.