Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Stainless
(743 reviews)
Price: $111.92
In Stock
Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Stainless
Item # 902B
Retail:$140.99
Our Price: $111.92
You Save: $29.07
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (743)
- Q & A (0)
- Photos
Convert-A-Ball Trailer Hitch Ball - 902B
- Trailer Hitch Ball
- 1-7/8 Inch Diameter Ball
- 2 Inch Diameter Ball
- 2-5/16 Inch Diameter Ball
- 1 Inch Diameter Shank
- Interchangeable Ball Set
- 10000 lbs GTW
- Class III
- Stainless Steel
- 2-1/4 Inch Shank Length
- Convert-A-Ball
Ball set with stainless steel 1" diameter, 2-1/4" long shank. Three hitch balls with 1-7/8", 2" and 2-5/16" diameters. 10,000 lbs GTW. Superior corrosion resistance.
Features:
- Changing out your Convert-a-Ball for another ball size is easy - just pop out the integrated pin and replace ball with any size Convert-A-Ball trailer hitch ball
- Includes 1 shank and 3 heavy-duty, interchangeable hitch balls
- Stainless steel ball and shank stand up to weather and moisture with unbeatable quality and durability
- Zinc-plated steel nut and washer resist rust
- Made in USA
Specs:
- Fits ball mounts with 1" diameter ball hole
- Shank diameter: 1"
- Shank length: 2-1/4"
- Ball sizes: 1-7/8", 2" and 2-5/16"
- Towing capacity: 10,000 lbs
- 2-Year limited warranty
Changing your hitch ball size is as easy as pushing out the integrated pin.
No need to get out the heavy wrenches. Convert-A-Ball's interchangeable balls are equipped with integrated pins, making it easy to change out your hitch ball for one of another size.
To switch balls, simply push in the integrated pin (using a pen or your finger) to release and remove installed ball. Then just replace with different-size ball, reversing the process.
This Convert-A-Ball interchangeable ball set exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
902B Convert-A-Ball Stainless Steel 3 Ball Set - 1-7/8", 2" and 2-5/16" Diameter Balls and 1" Diameter x 2-1/4" Long Shank - 10,000 lbs GTW
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Stainless - 902B
Average Customer Rating: 4.9 out of 5 stars (743 Customer Reviews)
Ball set with stainless steel 1" diameter, 2-1/4" long shank. Three hitch balls with 1-7/8", 2" and 2-5/16" diameters. 10,000 lbs GTW. Superior corrosion resistance.by: Thomas 05/02/2023
Fast Service. Great Quality. Have purchased several items. They are my go to for anything trailer related.
by: John 05/05/2023
Great company shipped fast thank you
by: Walter07/25/2020
Very good first impression. I read somewhere a tip about putting a screwdriver through the hitch (without the ball on it) to hold it steady while torquing it. That worked great! (why not include that tip with your packaging). I am currently only using the 1 7/8 ball with my utility trailer, but now that I have a truck, that opens up a lot of other possibilities and I'll be ready with the other two balls.
Comments
Good, Ive used the mid-sized ball a couple of times as well as the 1 7/8 a lot and it works fine.
Walter - 08/19/2021by: Cliff 10/22/2021
I have a small box trailer that has a 1 7/8" hitch, a boat trailer that has a 2" hitch, and a car trailer that has a 2 5/16" hitch. The Convert-A-Ball Interchangeable 3 Ball Set solved my problem. With out it I would have had to have a ball mount for each ball size. The Convert-A-Ball is a very good product.
by: Raymond 03/02/2023
Can't wait to put to good use.
by: Pete O.09/26/2011
Purchased and installed on a B and W Tow and Stow Pintle Hitch.
by: Doug09/17/2015
Have a set of these convert a ball and love the fact I don't have to have two or three different hitches or ball mounts for each ball. Or a ball mount that you have to rotate to get the ball size you need.
Comments
I love the product. I already had or own an ball mount and theconvert a ball setup. That is the reason I purchase another one but with the four inch . I have and will to continue to recommend the product.
Doug - 09/21/2016by: Byron08/14/2019
I've used Convert-a-Ball for as long as I can remember. My last one was for my Subaru Outback, 1 7/8" and 2" only, chrome, and ended up wearing and rusting a bit, so I thought for my Grand Cherokee I'd go with stainless and add the 2 5/16" for a larger trailer I know I'll be pulling. Really like the product. Most everything I pull is about the same height, so just swapping the balls is great. I've even had a rare occasion where the 1 7/8" came to the rescue. The only improvements I would love to see are rather minor:
- A torque spec on the packaging instead of having to search for it, thankfully etrailer has that info on their site, and maybe my package was missing instructions.
- A way to put a wrench on it for tightening. Slipping a rod through the hole works OK, but not everyone has some sort of rod the right size and strength to do this. I suspect there is more than one bent ratchet extension out there.
Once installed, it is an excellent product.
by: Hoss10/16/2017
Having this set of balls really help me out since I am changing trailers a lot of the time. I carry them with me in a small little ditty bag that I keep in the truck. I also keep the ball mount in the same bag because it's illegal to keep the hitch in the receiver when your not towing something.
by: Larry R05/15/2019
The interchangeable hitch balls are a great time saver. No more wrenched to change ball from one size to another. Often I use the 2 5/16” and 2” multiple times in one day. Only need a knife point, a writing pen or a screwdriver to push the ball pin enough to pull the pin enough to remove the ball. Works great. Well worth the price.
by: Mark c.06/15/2016
I needed a multi ball for my trucks pintle hitch and Lexis at etrailer hooked me up with a convert a ball that works great.
Thanks lexis
by: Tim M.04/29/2014
Excellent product. My previous convert-a ball system was chrome plated but I much prefer the stainless . The chrome plating wears off after a few moths of use and you are left with a rusty hitch ball . The convert-a ball system is the ONLY way to go if you have multiple trailers with different hitch ball sizes. Great price and extraordinarily quick shipping from the good folks at etrailer.
by: Richard b.05/17/2018
I have been using "convert-a-ball" for about 25 to 30 years now, unfortunately, when
I sell the vehicle that it is attached to (after explaining to the new owner), the setup has always gone with the rig . . . I also always get the SS version of them, because of the add'l strength provided & the non rust feature. Wouldn't have anything else.
I still have the original "convert-a-ball" mounted on my 1977 J20 Jeep. Still in use!
by: KMS06/24/2013
These are very nicely made and well machined. I like the versatility this set provides for towing multiple trailers. I have a travel trailer that uses the 2 5/16 ball and a utility trailer that uses a 2" ball. I no longer need multiple ball mounts. Just swap the ball & go.
by: NELDA09/24/2014
THIS CONVERT A BALL SET SAVES A LOT OF TIME AND MONEY.THE SET COME WITH THE 3 MOST COMMON SIZED HITCH BALLS. VERY EASY EVEN FOR ME, JUST PULL THE PIN TAKE OFF THE BALL AND PUT THE SIZE YOU WANT ON THE SHANK.PUT THE PIN BACK IN YOU ARE FINISHED AND DOWN THE ROAD.
by: JT02/14/2009
Always preparedThe 3-ball convert-a-ball system and cushioned ballmount was the first first and so far only ballmount and ball set I've purchased. I normally only use the 2-5/16" ball but it's nice to know the others are there when I need them. I went to go pick up a trailer from a friend once. He told me it had a 2" hitch but it was really 1-7/8". I had brought the complete kit just in case. He was amazed at how fast and easy it was to change ball sizes. With the 10k rating it will easily handle anything I'll ever tow.
by: 902B08/26/2015
This is great I love the concept of not having to change out a different ball or have three hitches laying around every time I pull something different, ( i have three different trailers ) I'm also happy I went with the stainless steel it looks great and should remain that way for years to come! Thank you!
by: Big Al01/11/2011
The kind of balls you need...A little pricey maybe... But then again they are stainless. I feel it's worth it. Buy them! Buy the case to put 'em in and store it behind the seat of your truck. If there is ever a chance that you will use them it is cheaper this way than any other. I have towed trailers that require all 3 of these sizes, and use 2 sizes on a regular basis. Just came back from a 200 mile bumpy dirt road trip with 3,000lbs and my 2" ball is still shiny new. I also highly recommend the "cushioned" ball mount to go with it. I have used the $250 aluminum rapid hitch setup and now I won't use it again. This setup is the way to go. No sloppy jerky movements and aluminum that chips and dents and needs to be polished. Great Product, Great Price, Great Experience, Great etrailer!!!
by: Jack F10/03/2017
Excellent product. I have hauled a variety of farm trailers and just takes a few moment to switch. The ability to take the ball off and cover the shank has saved some pants from a lot of grease.
by: David C.05/23/2014
Exactly what I wanted. Stainless is the way to go. I will say I have had this type ball before. (steel) the rubber o ring on the cross pin appears to be the only thing holding the pin in when not being used to tow a trailer. After 7 years the o ring rotted out and the ball bounced off. Lesson: when not in use keep it out of the elements and this thing will last forever!! Awesome product! E trailer has the best customer service around. Ordered online and had this in hand in 4 days! And that was choosing the cheapest shipping option possible!
Thank you E Trailer!!
David
by: Karl H.07/30/2014
Just received the balls yesterday. Installed the spindle on my hitch fit like a glove. Should be the easiest transition between trailers that I ever had in the past. Now I have (2) extra receivers that I have to store or give away :)
Thank you,
by: Vic A. 06/02/2016
Excellent product overall! I constantly tow various items that require different size hitch balls. This conversion ball system has made switching ball sizes extremely easy and a time saver. After a year of use there is little to no signs of wear. I would highly recommend this product to a friend!
by: Kent P10/24/2017
This hitch ball set has been an outstanding upgrade for me. I'm still kicking myself for waiting so many years to try the Convert-a-Ball system. Definitely worth the money!
by: Jeffrey07/27/2018
Bought a 3/4 shank set for my wheeler and a 1" shank set for my truck. Wonderful product, I wish I would have bought this years ago. Would of saved me $$$$$ on hitches and balls. Thank you for shipping them so quickly.
by: Brian Z08/22/2017
I normally don't write reviews however, I was so thoroughly impressed with the products I felt it necessary to write one. As I said, I was very impressed with not only the products themselves but also with the promptness of the delivery of my order. I purchased the flash self locking, aluminum ball mount part #dtbm4600, as well as the stainless convert-a-ball part#902B. The quality of each of these products is spectacular and I can't wait to try them out! I would highly recommend!
25
742
Show More Reviews
See what our Experts say about this Convert-A-Ball Trailer Hitch Ball
- Will the Shank Length for the Interchangeable Ball Set 902b Work with a 1 Inch Thick DrawbarYes, the # 902b hitch ball set is compatible with ball mounts with a 1 inch thick ball platform.
view full answer... - Will Convert-A-Ball Interchangeable Ball Set Fit a Tow and Stow Pintle HitchIf the Tow and Stow pintle hitch accepts a ball shank that has a 1 inch diameter and is 2-1/4 inches long then the Convert-A-Ball Interchangeable Ball Set, # 902B, would fit in it.
view full answer... - Type of Steel for Nut and Washer of Convert a Ball Hitch Ball part # 902BThe nut and washer of the Convert a Ball Hitch Ball part # 902B are zinc coated steel. The ball is stainless steel.
view full answer... - Does Orientation of Pin Hole on Convert-A-Ball 902B MatterThe pin hole orientation of the Convert-A-Ball Interchangeable Ball Set # 902B should be parallel with the rear bumper. That is what the manufacturer recommends.
view full answer... - Are Interchangeable Hitch Balls LegalI am not sure where you heard that interchangeable hitch balls like the Convert-a-Ball part # 902B are illegal but there are no laws out there that would indicate this.
view full answer... - Recommended 2" Hitch Ball with 1" Shank Made in USAThe only 2" hitch balls with 1" diameter shank that we offer which are made in the USA are from Convert-A-Ball who uses a unique interchangeable ball set like the Convert-A-Ball Interchangeable Ball Set part # 902B. This set comes with a 1-7/8", 2" and 2-5/16" hitch ball for use on any trailer. They are also all stainless steel so they will last a very long time.
view full answer... - Recommendation for Replacing Broken Pin on 2The only hitch balls that I am familiar with that use a pin would be an interchangeable ball sets like the Convert-A-Ball, # 901b. Replacement pins are not available so your hitch ball would need to be replaced. I have attached a link to all of the interchangeable ball sets which include a 2" ball. If you would like to go with a standard 2" hitch ball, I have attached a link to those as well.
view full answer... - Nickel and Stainless Steel Versions of the Convert-A-Ball Interchangeable Ball SetWe do in fact have both a nickel and stainless steel version of our Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank. The nickel version is part # 900b and is the more economical of the two. The stainless steel version is part # 902B and offers much better corrosion resistance. I've linked to a video review of these sets for you to look at.
view full answer... - Replacement 2 Inch Convert-A-Ball Compatible With 1 Inch ShankI'm guessing you already have the 1 inch shank, and you're looking to add a 2 inch stainless Convert-a-ball, is that correct? If so, you'll want to use # 401B which is compatible with 3/4 or 1 inch diameter shanks.
view full answer... - Recommendations for an Interchangeable Ball Set with 1-7/8 Inch and 2 Inch BallsThe first thing you will want to look at is the diameter of the ball hole in the ball mount you use. Some of the interchangeable ball sets we carry that have a 1-7/8 inch ball will fit a 3/4 inch diameter hole and some fit a 1 inch diameter hole. If you have a 3/4 inch diameter hole I recommend kit # 802b because of the stainless steel construction. It won't corrode or wear away like chrome. If you have a 1 inch diameter ball hole then I recommend # 902B for the same reason; stainless...
view full answer... - Can the Convert-a-Ball System be Left on the Draw Bar when not TowingThe ball pin uses rubber o-rings to hold it in place, the friction holds the pin from moving. I would suggest using a ball cover for a couple reasons. First since it wraps around the ball, the pin would not be able to come out so the ball will stay on. Second, I have ruined a couple pairs of pants by brushing up against greasy hitch balls. And third, a hitch cover will keep water off the ball, which is not as big of deal with stainless, but it is a good practice. I have added a link to...
view full answer... - Comparing the Nickel Plated and Stainless Steel Convert-A-Ball Interchangeable Ball SetThe stainless steel construction of the Convert-A-Ball Interchangeable Ball Set part # 902B is going to be much more weather resistant than the nickel plated steel of the Convert-A-Ball Interchangeable Ball Set part # 900B. There shouldn't be any rust inside the pinhole with the stainless set however, dirt and grime can still get inside and cause the pin to stick which can be present on both the stainless and nickel plated options therefore, I recommend using the Convert-a-Ball Cover part...
view full answer... - Compatibility of Covert-A-Ball Interchangeable Nickel Ball Set with Aluminum Ball MountFor use with an aluminum ball mount, the Convert-A-Ball Interchangeable Ball Set in stainless steel # 902B is your safest choice and my only recommendation. Regardless of which ball size you use, the weight capacity will remain at 10,000 lbs when used in conjunction with its 1" solid shank. If you were to use the nickel ball set # 900B you referenced, the dissimilar metals coming into contact with one another can cause a reaction risking damage to the aluminum ball mount and eventually...
view full answer... - Convert-A-Ball Interchangeable Ball Set 902B Ball Mount CompatibilityThe Convert-A-Ball Interchangeable Ball Set # 902B can install on any class of ball mount that has a 1-inch diameter ball hole and whose ball platform is not too thick for the shank which is 2-1/4-inches long. This multi-ball part will fit properly on a ball platform up to 1-1/8-inches thick. I confirmed this with Convert-A-Ball. This item is rated for 10,000-lbs towing no matter which ball size is installed. For example, the Convert-A-Ball Ball Mount Class IV Ball Mount # AMSC2 has a...
view full answer... - Torque Spec for the Nut of the Ball 3 Ball Convert a Ball set part # 902BI spoke to my contact at Convert a Ball and he informed me that the nut of the Convert a Ball 3 Ball set part # 902B needs to be torqued down to 120 ft lbs. We have a torque wrench that would work part # ALL944001.
view full answer... - Availability of Convert-A-Ball Interchangeable Trailer Hitch Ball w/ 1-1/4 Inch Diameter ShankConvert-A-Ball doesn't offer their Interchangeable Trailer Ball Sets with a 1-1/4 Inch diameter. If you're wanting to use a ball mount with a 1-1/4 inch hole for the trailer ball, you could use a Hitch Ball Bushing like # 58184, which would allow you to use a 1 inch diameter shank trailer ball in a ball mount with a 1-1/4 inch hole. This would allow you to use the # 902B Stainless Steel Interchangeable Ball Set or if you prefer nickel plated, you could use # 900B. Keep in mind that using...
view full answer... - Recommended Multi-Ball Hitch Ball Kit for Use in 1988 Dodge Ram PickupWe do offer interchangeable hitch ball kits that you can see on the linked page. You will want to measure the diameter of the ball hole in the bumper and select a ball with the matching shank diameter. You'll also want to choose one with a shank length that suits the thickness of the bumper material. The ball sets shown have either 3/4-inch or 1-inch diameter shanks and shank lengths from 2-1/4- to 3-inches. Just click on the filters on the page to select the features you need. If you...
view full answer... - Bumper Hitch For a 2006 Ford Cab and Chassis F-350, 450 or 550 and Cushioned Ball MountIt sounds like you are looking for the Buyers Products Flatbed Bumper Hitch Plate w/ 2" Receiver # 3371809055. This is designed to fit a 34" wide frame for a 2006 Ford cab and chassis F-350, F-450, or F-550. If you have a different vehicle please let me know as that is what I saw entered for a vehicle. Using a Convert-A-Ball Ball Mount # AMSC4 with the internal cushion helps to reduce vibration transferring from the trailer into your chassis. This can be paired with the Convert-A-Ball...
view full answer... - Recommendation for Easy Ball Change on the Convert-A-Ball Dual-Cushioned, Adjustable Ball MountThere is not a replacement ball mount available for the Convert-A-Ball Adjustable Cushioned Ball Mount, CAB-UM, but there is what I believe is a better solution to your dilemma. The Convert-A-Ball Interchangeable Ball Set, item # 906B, would give you the ability to change out balls just as quickly as changing out the adjustable ball mount and would be much easier to store in the vehicle. This kit has 2-5/16 inch and 2 inch balls. If you need 1-7/8 inch and 2 inch balls the Convert-A-Ball...
view full answer... - Matching Hitch Ball to Ball Mount DTBM4600You are correct! The thickness of the ball mount platform is 1 inch. We have hitch balls that will fit with capacities up to 7,000 lbs. The hitch ball shank length needs to be at least 2 inches. We also have convert-a-ball hitch balls that go up to 10,000 lbs. If you are using the convert-a-ball system, the pin will lock into place and not fall off, even if no trailer is hitched up. I would recommend not leaving the ball and pin on your vehicle because of possible theft. We have shank...
view full answer... - Will the Curt Class IV Trailer Hitch # 14301 Fit on a 2010 Chevrolet 1500 Crew CabYes, the Curt Class IV Trailer Hitch Receiver , item # 14301, will fit your 2010 Chevrolet Silverado Crew Cab. I have provided a link to instructions for you to review. You will need to check the GCVWR (gross combined vehicle weight rating) of your truck to determine the towing capacity of your vehicle. This rating can be found in the owners manual and sometimes in the drivers door jamb. GCVWR is the maximum allowable weight for you vehicle the trailer and all of the contents in both....
view full answer... - Availability of 10K Ball Mount and Multiple Hitch Balls for Class III Hitch on 2015 Toyota TundraWe do offer a range of cushioned 10K-rated ball mounts for a 2-inch hitch that can be seen by clicking on the included link. These are available with a range of rise or drop to suit your trailer's coupler height, which you'll naturally want to be level when hitched. Do note that while the ball mount is rated to 10K the size of hitch ball you use will also determine towing capacity. For example, the ball mount # AMSC2 that you referenced has a 3/4-inch rise or a 2-inch drop. If used with...
view full answer... - Trailer Hitch, Ball Mount, Hitch Ball, and Wiring Recommendation for a 2010 Subaru ForesterFor your 2010 Subaru Forester, I recommend a 2 inch trailer hitch, like the Curt Trailer Hitch, # 13147, that you have referenced. The advantages of a 2 inch, Class III hitch are, as you have pointed out, greater weight capacity, more options for accessories, and you will be able to use weight distribution if you wanted. I have included a link to the installation details and a video installation below. You will also want to check your owners manual for your vehicle towing capacities. The...
view full answer... - Determining Correct Ball Mount for 2007 Honda Odyssey to Tow Pop Up CamperThe way to determine the correct amount of rise (or drop) needed to tow a trailer level there are a couple of measurements needed. First you would measure from the ground up to the top of the receiver opening on the trailer hitch. Then, with the trailer level, measure from the ground to the bottom of the coupler. If the trailer is higher the difference is the amount of rise you will need. And if the vehicle is higher the difference is the amount of drop you would need. On the 2007 Honda...
view full answer...
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Andrew K
Installed by:
Colin H
Installed by:
Kathleen M
Installed by:
Hayden R
Installed by:
David F
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-636-245-5620
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.