Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included. Handle sold separately.
Features:
To install, remove the broken waste valve and seals from your black-water tank. Then place the included seals on the flange fittings and position the new valve body. Tighten the provided hardware to complete installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we are going to take a look at the valtera 3 inch bladex waste valve. This one is no handle. Now, this valtera bladex 3 inch waste valve body also has the drilled stem. It is designed to fit the Bladex, the Valterra, the Bristol, and the Anonda valves. It does include everything shown here. It includes the valve body itself, the 2 seals that would be used when you install this.
It includes the 4 bolts and nuts for installation. Just to give you one last measurement. As you can see when you pull on the handle, it opens up the opening. The internal diameter of this opening is going to be right at 3 1/2 inches. That should do it for the review on the valtera 3 inch bladex waste valve with the no handle.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

John H.
4/18/2023
Its still working with no leaks, after a year, just as it should.

Pat K.
9/10/2023
Still working like a charm!
Do you have a question about this RV Waste Valve?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Jenny N.
4/26/2022
You mentioned that you had failed to notice that this was the waste valve body only. We do have the cable with the handle as a separate part if you need it. It is part # TC120PB.