bing tracking image
  1. Trailer Brake Controller
  2. Tekonsha
  3. Electric
  4. Electric over Hydraulic
  5. Proportional Controller
  6. Time Delayed Controller
Tekonsha Prodigy iD Brake Controller w/ LED Knob - Bluetooth - 1 to 4 Axles - Proportional

Tekonsha Prodigy iD Brake Controller w/ LED Knob - Bluetooth - 1 to 4 Axles - Proportional

Item # TK49VR
Our Price: $272.16
Trailer Brake Controller

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 1.29 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Mount the digital LED control knob of this brake controller seamlessly into your dash while the main unit installs out of sight. Control your tow settings and save multiple trailer profiles from your phone with Bluetooth. Great Prices for the best trailer brake controller from Tekonsha. Tekonsha Prodigy iD Brake Controller w/ LED Knob - Bluetooth - 1 to 4 Axles - Proportional part number TK49VR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Trailer Brake Controller - TK49VR

  • Electric
  • Electric over Hydraulic
  • Proportional Controller
  • Time Delayed Controller
  • Smartphone Display
  • Up to 4 Axles
  • Tekonsha
  • Dash-Mounted Knob
  • Dash Mount

Mount the digital LED control knob of this brake controller seamlessly into your dash while the main unit installs out of sight. Control your tow settings and save multiple trailer profiles from your phone with Bluetooth.


Features:

  • Brake controller activates trailer brakes in proportion to your vehicle's braking
    • Automatically adjusts trailer's braking based on deceleration of tow vehicle
    • Can also be switched to a time-delayed setting for off-roading, overlanding, or towing in adverse weather
  • Tekonsha EDGE mobile app lets you control and monitor all your settings directly from your smartphone
    • Select power level, boost setting, and reverse mode
    • Switch between proportional and time-delayed braking
    • Save settings for multiple trailer and driver profiles - great for a fleet
    • Receive real-time diagnostics and alerts with access to tech support
  • Digital LED control knob mounts seamlessly into the dash to keep your interior looking sleek
    • Gives you manual override and full menu access at your fingertips
    • Offers simple diagnostics with colored LED alerts
    • Syncs automatically to the EDGE app with Bluetooth
    • Plugs directly into the main unit
  • Main unit hardwires into your vehicle and mounts out of sight behind the dash
    • No more banging your knee on a bulky controller
    • No interference with airbags or other vehicle accessories


Specs:

  • Application: trailers with up to 4 axles (8 brake assemblies)
    • Compatible with electric or electric-over-hydraulic trailer brakes
  • Main unit dimensions: 4" long x 4-1/2" wide
  • Control knob dimensions: 3-1/2" long x 1-7/8" wide
    • Extends 1" out of the dash
  • Limited lifetime warranty


Weclome to one of the smartest trailer brake controllers on the market. By combining a smartphone app with a Bluetooth, dash-mounted control knob, the Tekonsha Prodigy iD takes all the limitations away. It keeps your cab clutter-free while giving you a sleek, factory look and perfect control over your trailer brakes. It's fully customizable to give you any combination of towing options you need for a safe and easy trip.


Tekonsha Prodigy iD Bluetooth Brake Controller

Bluetooth Synchronization

Tekonsha Prodigy iD Bluetooth Brake Controller App Sync

The Tekonsha Prodigy iD is all about choices. That's why it is designed to work with both a dash-mounted Bluetooth knob and the Tekonsha EDGE mobile app, which you can easily download and use to control the settings. The knob is great for keeping the manual override at your fingertips for sway control or emergencies, while the app makes it easy to change and save your settings.


The two are wirelessly connected and synced with Bluetooth, so whatever change you make on one will appear on the other. This means that you don't need to have the app open the whole time you're towing; you can put in your settings and then close the app, and the settings will transfer to the knob. And of course, the full menu is always available in the dash knob as well. You can access it by just turning the spring-loaded knob clockwise and pressing and holding the LED display to select.


Tekonsha Prodigy iD Bluetooth Brake Controller Dash Mounted Knob

The control knob mounts seamlessly into your dash, giving you a clean, from-the-factory look. When you've completed your install, the knob is all you will see.


Full Customization

Whether you're using the control knob or the app, the Tekonsha Prodigy iD gives you all the options you need to adapt to each towing trip and each trailer in an easy-to-use menu, including:


2 Braking Modes

Like most brake controllers on the market today, the Tekonsha Prodigy iD is equipped with proportional braking. This is perfect for highway driving and everyday towing. But uniquely, this brake controller also comes with time-delayed braking for off-roading adventures or towing over rough terrain or in adverse weather conditions. You don't have to choose between the two; you get both, so you're ready to tow anywhere.


Proportional Braking

What is proportional Braking

Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer. Proportional braking is ideal in most towing situations.


Time-Delayed Braking

What is time-delayed braking

Time-delayed braking means that when your trailer brakes are activated, they follow a preset pattern every time. The brakes are applied with a predetermined amount of power after a set amount of time, regardless of how hard you hit the brakes in your tow vehicle. If you use this mode for everyday towing, you could sometimes get more or less braking power than you need for the situation, resulting in an uncomfortable push/pull sensation as well as uneven wear on your brakes and tires over time.


That said, time-delayed braking can be just what you need for off-roading or overlanding with a trailer, towing over rough terrain, or in adverse weather because of the control it gives you over your trailer independent of what your tow vehicle's doing. You can set it to a lower amount of braking power in icy conditions or on a slick, muddy slope to keep your trailer from braking too hard, or set the braking power higher if you're on a steep descent and want to be sure the trailer's momentum doesn't push your vehicle forward. If you need the option, the Tekonsha Prodigy iD is ready for you.


Braking Output

On both the app and the dash-mounted knob, you can set your braking output level anywhere between 1 and 10, in increments of 0.5. This will control how much force the brake controller sends to the trailer brakes when activated. If you have multiple trailers or you're hauling an empty trailer one way and a fully loaded one on the way back, it's quick and easy to adjust the brake controller. You want to set the braking power as high as it will go without locking up the trailer brakes.


Boost

Choose between 3 different levels of boost or turn boost off. Boost is perfect for towing heavy loads when you need more umph to bring your trailer to a stop. Your tow vehicle doesn't need that much power to brake in time, but your heavy trailer does.


Depending on the level of boost, your trailer brakes can start at either 13 percent or 25 percent of the set braking output. What this means is that, instead of starting at 0, the brakes will start at 25 percent and get to 100 percent sooner. This keeps the trailer from pushing your tow vehicle forward.


If your trailer weighs less than your tow vehicle, no boost is needed. But, if you want your trailer to lead the braking, you can select level B1.


Boost Levels:

Approximate Gross Trailer Weight Boost Level Increase in Initial Power Output
Less than tow vehicle GVW B1 13%
Equal to tow vehicle GVW B1 or B2 13% or 25%
Up to 25% more than tow vehicle GVW B2 or B3* 25%
Up to 40% more than tow vehicle GVW B3* 25%

*Both B2 and B3 offer a 25-percent boost in initial power. But the braking curve for B3 is more aggressive than that of B2. This means that, even though you will start out with the same intensity when using these boost levels, you will get an overall more aggressive braking experience with the higher level. So if you use B3, you will reach maximum braking sooner than if you use B2.


Turn on reverse mode to temporarily deactivate the boost, allowing you to back up the trailer at your campsite or in a parking lot. Reverse mode will automatically turn itself off after 3 minutes.


Brake Type

If you have multiple trailers or anticipate getting a new one down the road, it's great to have a brake controller that works with both types of brakes. Simply select electric or electric-over-hydraulic in the menu.


Save Your Settings

Get on the road faster by saving your settings. With the app, you can add and store a trailer with all its presets so it's ready to go when you are. This is perfect for a fleet when you don't want to be changing the settings back and forth every time you swap trailers. You'll have the ideal settings waiting for you.


Use the passcode to lock the iD brake controller to your phone and ensure you're the only one who can connect to it. If you forget your passcode, you can easily reset it from the control knob to the original 123456 code and then make a new one in the app.


Tech Support

The LED display on the dash-mounted knob provides easy-to-read diagnostics and alerts as you're towing so you can address problems as they arise. Turn to the app for full support: you can troubleshoot, contact customer service, learn about safe towing practices, and find product information on the brake controller.


If you want a brake controller that has it all, this is the product for you.


Seamless, Out-of-the-Way Installation

The Tekonsha Prodigy iD comes in 2 pieces: the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or interfering with your vehicle's lower airbags.


Tekonsha Prodigy iD LED Dash Knob

The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel or wherever there's space on your dashboard. The knob is designed to mount seamlessly into your dash for a clean, from-the-factory look.


When deciding where to mount the knob, keep in mind that it needs to be horizontally level and parallel with the direction of travel so that the inertia sensor can work correctly. It can't be more than 20 degrees off-center. To make your install easier, remove the panel you'll be mounting the knob in and use the included drill template. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!


Insert the mounting collar into the panel and assemble the knob piece by piece according to the directions. Be careful not to touch the electrical contacts, as this could damage the device.


Tekonsha Prodigy iD Brake Controller Main Unit

Once the knob is mounted, you'll want to find a good place to install the main unit. The main unit can be positioned at any angle or position. Your only restriction is the plug-in cable between the main unit and the knob; you want to be sure they'll reach each other before screwing anything into place.


Tekonsha Prodigy iD Brake Controller Wiring Harness

To complete the installation, you will need to hardwire the included wiring harness to your vehicle or, for a plug-and-play install, a vehicle-specific wiring adapter (sold separately) is available for most newer trucks and SUVs.


Note: If a custom brake-control wiring adapter is not available for your vehicle, one of the following will be required: 20-amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications or 30-amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications


Once all connections are made, securely mount the box using the included zip-ties. Do not zip-tie the box to wiring or cables that can shift as you drive and don't have it touching any carpeting, as this will not allow the module to cool properly.


For assistance in properly wiring the Prodigy iD, please refer to the diagram below:


Tekonsha Prodigy iD Wiring Diagram

Once the brake controller is all set up, all that's left to do is get the Tekonsha EDGE app on your smartphone. Download the app from Google Play or the App Store and create an account. Get in range of the brake controller and the app will connect. From there, the app will walk you through creating and saving your trailer profile.


Installation Accessories

See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.



90920 Tekonsha Prodigy iD Bluetooth Trailer Brake Controller Dash Knob and App - 1 to 4 Axles - Proportional and Time-Delayed

Installation Details TK49VR Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Tekonsha Prodigy iD Brake Controller w/ LED Knob - Bluetooth - 1 to 4 Axles - Proportional - TK49VR

Average Customer Rating:  2.0 out of 5 stars   (1 Customer Reviews)

Mount the digital LED control knob of this brake controller seamlessly into your dash while the main unit installs out of sight. Control your tow settings and save multiple trailer profiles from your phone with Bluetooth.

by:

The installation on my 2022 Ford Explorer of the LED knob was not very easy. Even though I had looked up the measurements of the back side of the LED knob before I ordered, I couldn't find a good spot to install it without tearing the entire dash apart. It was just too long. Ended up installing it on the cover of the fuse panel. Not the desired spot since I can't read the LED. Thank goodness for the bluetooth part of the controller. I was able to set it up using the percentages since the knob was not level and I presumed the sensor for the electronic portion of the braking is located.
While installing the LED lens fell off the front of the knob. I put it back on but there was no registration mark and discovered I installed it upside down after following the troubleshooting instructions for the blank screen. I had power but no readout. All was good after flipping it.
Applying the brakes manually by turning the outside ring of the LED housing doesn't seem to work as it should. It only applies a small percentage of braking compared to what I have the controller set to. Again, thank goodness for the bluetooth to my phone to see all of this.
If I had it to do over again I would have installed an inexpensive, flat universal controller that just uses a percentage setup that I can see and doesn't require a 'cheat cheat' to figure out what the readout means. I still may do that.



1
1

See what our Experts say about this Tekonsha Trailer Brake Controller

  • Dimensions of Tekonsha Prodigy iD Brake Controller Knob
    The knob on the Tekonsha Prodigy iD Trailer Brake Controller # TK49VR is 3-1/2" long, 1-7/8" wide at the widest part, and the knob itself has a diameter of 1-1/2". The fit on your blank switch popout will depend on the size of the piece you are wanting to install it on. Keep in mind, you will use the template supplied to drill the holes for installation. The main hole in the center is 1". The square portion of the knob will be mounted behind the vehicle dash with only the mounting collar,...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Brake Controller Port Location on 2023 GMC Yukon
    In regards to the trailer brake controller plug location on a 2023 GMC Yukon, this will be found to the left of the steering column tucked up high behind the dashboard. It's actually just a bundle of wires you'll connect to the brake controller of your choice (I recommend the Tekonsha Prodigy iD Wireless Brake Controller part # TK49VR) using wire connectors.
    view full answer...
  • Where is Brake Controller Install Connector for 2022 Jeep Grand Cherokee 4xe
    The brake controller install harness on your 2022 Jeep Grand Cherokee 4xe is under the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. The Tekonsha brake controllers like the Prodigy P3 part # 90195 are really the nicest around. They are the most reliable, perform the best, and have the best reputation out there. To install it the correct harness for your vehicle is the part # TK93VR. The Tekonsha Prodigy iD part # TK49VR is a really great...
    view full answer...
  • Is Tekonsha Plug-In Wiring Harness For BMW X5 Compatible With Prodigy iD Brake Controller
    Smart to confirm, and I verified for you directly with Tekonsha that yes, the plug-in connector for the BMW X5 you asked about is 100 percent compatible with the Prodigy iD brake controller, with the parts being the following: - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - BMW # TK29FR - Tekonsha Prodigy iD Wireless Brake Controller # TK49VR
    view full answer...
  • Brake Controller Similar to Curt Echo Mobile that Can be Used with More than Two Axles
    I do have a similar solution for you but the Curt Echo Mobile Brake Controller part # C51180 can only be used with up to two trailer axles. Instead we have the Tekonsha Prodigy iD part # TK49VR which can be used with up to 4 axles. This has a smartphone display like the Echo but also comes with a small knob you can install on the dash for more direct access if you wanted as well.
    view full answer...
  • Best Brake Controller for 2022 Subaru Ascent with Factory Tow Package
    For your application I recommend going with the Tekonsha Prodigy iD # TK49VR which will plug into the connector under the dash of your 2022 Subaru Ascent by using the Wiring Adapter # 3062-P. I really like this brake controller for a few reasons; it has a new design which allows it to be installed virtually anywhere, the control know looks like it is OEM and it isn't as big as a standard controller so you're saving on in-cab real-estate, plus the control knob has a small LED screen so...
    view full answer...
  • Wiring Harness For Prodigy iD Brake Controller on 2002 Ford F-350 Super Duty
    Yes the wiring harness for your 2002 Ford F-350 Super Duty is indeed the same for the P2 and the Tekonsha Prodigy iD Trailer Brake Controller # TK49VR. Both brake controllers will use the Tekonsha Plug-In Wiring Adapter # 3035-P.
    view full answer...
  • Will the Tekonsha 3035-P Adapter Work With Prodigy iD Brake Controller on 2008 Ford Expedition EL
    Yes, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury # 3035-P will fit the Tekonsha Prodigy iD Trailer Brake Controller # TK49VR. This will allow you to install the brake controller using the factory port on your 2008 Expedition EL.
    view full answer...
  • Wiring Pigtail Adapter Needed For a Tekonsha Prodigy iD Brake Controller on a 2022 Ford Explorer
    The Tekonsha Plug-In Wiring Adapter # 3035-P will allow you to plug and play connect the wiring for the Tekonsha Prodigy iD Trailer Brake Controller # TK49VR. Your 2022 Ford Explorer will need the factory tow package for the wiring adapter to work.
    view full answer...
  • What Will be the Best Brake Controller for My 2022 Subaru Ascent Without Factory Tow Package
    The brake controller I recommend for your 2022 Subaru Ascent is the Tekonsha Prodigy iD Trailer Brake Controller - Bluetooth - 1 to 4 Axles - Proportional # TK49VR. The reasons I recommend the Tekonsha Prodigy iD is because you will not have have a controller underneath your dash, instead you will have a knob mounted on your dash or console. Also, this brake controller is blue-tooth enabled, allowing you to use your phone as a brake control interface. To connect your brake controller you...
    view full answer...
  • Brake Controller Recommendation and Installation on a 2022 Kia Telluride with 7-Way
    I really like the Tekonsha Prodigy iD Trailer Brake Controller # TK49VR for your 2022 Kia Telluride because it gives you the ability to switch between towing modes for the best towing control plus everything aside from the control knob installs out of sight. This means you not only get a very clean looking installation, but you also save on precious real-estate for the interior of your vehicle. We haven't had the opportunity to install this on a Telluride as of yet (October 2021) but I'm...
    view full answer...
  • Will My Tekonsha Prodigy Brake Controller Work with 3 Trailer Axles?
    I have an informative answer for you. If you do not have a Prodigy that is confirmed to work with 3 axles, there is unfortunately nothing that you can do in order to "upgrade" that particular unit. The best bet is to purchase a different model that is confirmed to work with 3 axles. Without knowing the model of Tekonsha Prodigy you have, you will be able to use the controller for 3 axles if you have the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles # 90195. However, it is...
    view full answer...
  • Recommended Trailer Wiring and Brake Controller for a 2022 Toyota Highlander No Factory Tow Package
    Thank you for the details! Since it sounds like you're planning on towing a trailer with brakes you'll want a full wiring setup which we have with the Tekonsha Kit # TK57VR. This tees into your factory connector for the basic lighting functions and then you will need to route and connect some additional wiring to complete the installation. You can mount this next to your receiver for easy access with the Bracket # 18140. This wiring kit comes with a 7-Way so I recommend unplugging that...
    view full answer...
  • Best Trailer Hitch And Wiring For A 2022 Honda Passport
    For your 2022 Honda Passport, I recommend the Draw-Tite # 76290. This Class III hitch is rated up to 6,000 pounds towing and 900 pounds of tongue weight capacity, though you will need to check your owner's manual for your max capacities. It is a quick and easy bolt on application as well, so no drilling or anything. I included an install video for you to check out as well. For the wiring, I recommend the Tekonsha T-One Vehicle Wiring 7-Way Harness # 118291. This is also a quick and easy...
    view full answer...
  • Trailer Wiring Recommendation for a 2022 Chevy Equinox
    Glad to hear you're off on the right start with the Curt Trailer Hitch # C77FR on your 2022 Chevy Equinox! I'd be more than happy to help you navigate the wiring side of things. Smaller trailers usually only have a 4-Way connector for the basic lighting functions and for this I recommend the T-One # 118759 if you have the Premier model, the T-One # 118750 if you don't have the Premier model, or the T-One # 118285 if you have the factory Tow Package. Attached are some installation videos...
    view full answer...
  • Best Brake Controller and Wiring for a 2022 Kia Telluride
    I have a perfect solution for installing a brake controller on your 2022 Kia Telluride! Since you don't have any wiring we will need to start from scratch, but thankfully there are plug-in 4-Way options and I recommend going with the Tekonsha T-One # 118784 because it's the most reliable. The 4-Way gets you the basic light functions for your trailer so since we are adding a brake controller we also need the Universal Wiring Kit # ETBC7 to get that fully-functioning 7-Way. Adding a No-Drill...
    view full answer...
  • Brake Controller Recommendation for 2015 GMC Sierra 3500 to Bypass Integrated Brake Controller
    We can help bypass the OEM controller of your 2015 GMC Sierra 3500 but to answer your first question you do not need to take truck to dealer to have any check engine lights addressed. I would recommend the Prodigy P3 part # 90195 for you because this is widely considered to be the best brake controller that stops trailers in the smoothest and safest way but more specifically for you I recommend it because it has ability to save trailer settings so you can easily switch between two trailers...
    view full answer...
  • What Trailer Hitch Is Best For Towing a Coleman Lantern 18BH with a 2021 Jeep Gladiator?
    The Draw-Tite Max-Frame Trailer Hitch Receiver # DR64FR will be the best for towing your Coleman Lantern 18BH with your 2021 Jeep Gladiator. If you have a Rubicon trim this receiver will not fit your specific Gladiator. The Draw-Tite receiver is constructed so that you will be able to use a weight distribution hitch system to allow for you to prevent the rear of your Gladiator from sagging with the weight of the camper. The receiver is rated for a maximum tongue weight of 1,125lbs and maximum...
    view full answer...
  • Parts Needed To Install Trailer Brake Controller On 2021 Toyota RAV4 Adventure
    The best place to connect the red brake signal wire of a trailer brake controller to a vehicle is the cold side of the stop light switch. There are some vehicles where this can be difficult, so Tekonsha has previously mentioned that running it to a third brake light is a perfectly acceptable alternative. The stop light switch or third brake light wire both have 12 volts. Since you are concerned about potential error lights on your 2021 Toyota RAV4 this would be a good solution. You will...
    view full answer...
  • Parts Recommendation to Install and Use Brakes on 3.5K Timbren Heavy-Duty Axle-Less Suspension
    Thank you for all of the great info! For the correct brakes, hubs, and other parts to get the electric brakes working with the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS01 I recommend the following: Dexter Nev-R-Adjust Electric Trailer Brake Kit - # 23-458-459 Dexter Trailer Hub and Drum Assembly - # 8-201-5UC3-EZ etrailer Trailer Wiring 7-Way Upgrade Kit - # e99011 10 Gauge Wire - # 10-1-1 Heat Shrink Butt Connectors - # DW05745-10 The Nev-R-Adjust brakes will automatically...
    view full answer...

Do you have a question about this Trailer Brake Controller?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer brake controller information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Wilson B
Updated by:
Wilson B
Employee Konnor K
Updated by:
Konnor K
Employee Amanda K
Updated by:
Amanda K
Employee Mike S
Written by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924