We'll connect you with nearby partnered installers who know this exact setup.

Roadmaster

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

Part Number: 492-1

2221 Reviews | 14 Questions

In Stock

$575.00

Retail:$632.50

You Save: $57.50

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

roadmaster tow bar base plate partially hidden crossbar-style kit - removable arms

roadmaster tow bar base plate hitch pin attachment partially hidden

roadmaster tow bar base plate removable draw bars crossbar-style kit - arms

roadmaster tow bar base plate hitch pin attachment partially hidden 492-1

roadmaster tow bar base plate removable draw bars partially hidden crossbar-style kit - arms

Show All (6) Product Images

Show Fewer Product Images

Customer Photos

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms customer photo

Show All (2) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

The crossbar-style hidden brackets attach to your vehicle's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing. Great Prices for the best tow bar base plate from Roadmaster. Roadmaster Crossbar-Style Base Plate Kit - Removable Arms part number 492-1 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (2221)
Q & A (0)
Related Parts
Photos

Roadmaster Tow Bar Base Plate - 492-1

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Ready for Flat Towing: Provides secure frame-mounted points to connect your tow bar for safe towing behind your RV.
Blends In When Not Towing: Removable drawbars leave the front brackets nearly invisible once detached for a clean look.
Built to Last: Computer-cut, all-steel construction with black powder coat resists corrosion and road wear.
Simple to Use: Square drawbars attach and remove easily with two hitch pins for quick setup and storage.
Custom Fit Design: Vehicle-specific base plates align precisely with factory mounting points for smooth installation.

Features to know about

Built for a Clean Front End: Hidden Brackets with Removable Arms

This setup keeps your front end looking clean when you’re not towing. The crossbar-style hidden brackets attach directly to the frame, and the square drawbars slide out with two hitch pins. Once removed, the remaining brackets are tucked behind the grille, leaving almost nothing visible and protecting the mounts from scrapes and scuffs.

Strong Where It Counts: All-Steel Construction with Powder Coat Finish

The precision computer-cut, all-steel build gives this base plate serious strength for long-distance towing. Each piece is welded and finished with a black powder coat that resists corrosion and road wear. It’s a solid setup that can handle the miles while keeping a tight, factory-fit appearance up front.

Easy DIY Setup: Bolt-On Design with Included Hardware

You don’t need to weld anything to get this mounted. The kit bolts straight to the frame and comes with complete instructions and all the necessary hardware for a direct fit. It’s straightforward work with basic tools, making weekend installation completely doable for someone who likes to turn their own wrenches.

Ready to Connect: Works with Roadmaster Tow Bars via Quick-Disconnect Crossbar

If you’re running Roadmaster towing gear, this base plate is fully compatible when paired with the quick-disconnect crossbar (910021-00, sold separately). The drawbars pin in for towing and pull out just as easily when you’re done, keeping hook-up and removal simple every time you travel.

Specs

Construction and Design

Bracket style: Crossbar-style hidden brackets
Drawbar design: Square drawbars (front arms) are removable via 2 pins
Material: All-steel construction
Finish: Black powder coat finish — durable and corrosion resistant
Manufacturing method: Computer-cut for exceptional strength
Bracket visibility: Partially hidden when installed; remaining brackets virtually invisible when drawbars are removed

Compatibility and Fit

Vehicle attachment: Mounts to vehicle’s frame
Tow bar compatibility: Compatible with Roadmaster tow bars with use of quick-disconnect crossbar (910021-00 – sold separately)
Model fitment: Custom base plates ensure a perfect fit for your vehicle

Installation and Hardware

Installation type: Simple bolt-on installation — no welding required
Included components: Instructions and mounting hardware included

Origin and Warranty

Country of manufacture: Made in the USA
Warranty: Limited Lifetime Warranty

492-1 Road Master XL Base Plate Kit

Installation Details 492-1 Installation instructions

This Product Fits The Following Vehicles

2002 - 2002 Ford F-150 2 Wheel Drive - excluding Harley Davidson and Lightning
2003 - 2003 Ford F-150 2 Wheel Drive - excluding Harley Davidson, Lightning, and STX
2000 - 2001 Ford F-150 2 Wheel Drive - excluding Lightning
1997 - 1998 Ford F-150 and F-250 Light Duty 2 Wheel Drive
1999 - 1999 Ford F-150 and F-250 Light Duty 2 Wheel Drive - excluding Lightning
2004 - 2004 Ford F-150 Heritage Series 2 Wheel Drive - excluding Harley Davidson, Lightning, and STX
2004 - 2004 Ford F-150 Heritage Series 2 Wheel Drive - excluding Lightning

4.8

2221 reviews

5 Stars		(1871)
4 Stars		(264)
3 Stars		(48)
2 Stars		(13)
1 Star		(25)

by: Andrew 04/26/2020

This product was an absolute breeze to install. The directions were good and it’s actually very simple once you get your head around it. The holes are already in the frame no drilling, I didn’t even have to cut my molding as it warned in the description. I still have to do all the wiring and stuff but this part is done and it was the part I was most leery of - and I had no trouble at all. Took me 2-3 hours by myself with tons of shade breaks because it’s like 95f in direct sunlight lol. It could be done in 1-2 hours in the shade. I do recommend an impact made it much easier but you want to double check the torque with a good torque wrench and check it again every 3000 miles as the directions suggest. I will be using this with the road master falcon 2 tow bar which in one my pics you can see I have fitted the cross member and it’s a perfect fit.

Click to Enlarge

by: Don B. 08/11/2013

2000 Ford F-150

I'm 57 yrs old and I installed this bracket in the heat of the day here just south of Atlanta, Georgia today August 11 in about 4 hours. That's accounting for water breaks and helping a neighbor load something in his vehicle. The hardest part at my age is getting the 150 lbs of torque while under the truck. Piece of cake otherwise!

Don B. One Year Later

8/11/2014

Still on the road with no problems. Thank you for your follow up. I find it kind of interesting that your company is following up on a base plate product when automotive industry business dont. Bought my RV about a year ago and havent heard a peep from them. I say kudos to your Quality Assurance team. As a retired military serviceman with over 24 years in the support department, I know how much follow up and QA mean. Thank you and continue To do the Right thing.

by: Dennis 06/05/2024 One Year Later

I was pulling my truck using the roadmaster crossbar and to my surpass the towbar broke in half as I was towing. Good thing I was in town only going 20 miles poer hr.

by: Greg 05/05/2023 One Year Later

Very easy to install and works great

Greg One Year Later

5/6/2024

The base plate kit works great,l love how easy it is to hook up to my motorhome now

by: Melvin B 05/31/2017 One Year Later

This Product Works Great The Price Was Great Too

by: David 05/04/2025

by: Robert 09/09/2022

by: Bruce A 07/02/2026 One Year Later

Installation was a bit trying. Ended up looking very clean and almost invisible.
Using the tow bar worked super easy and our motorhome hardly noticed the Mini Cooper back there.

Click to Enlarge

Claire H.

7/6/2026

It really is invisible! It took me a second to even find the base plates in your photo!

by: Christian 05/13/2026

1995 Jeep Grand Cherokee

Bolted right up. Installation should be done with bumper on, as you can't fit the ends through the louvers without some convincing. Works great so far. Was able to use a Stowmaster 5000 with it.

Click to Enlarge

Kate F.

5/14/2026

Thanks for the review and for sharing your installation experience Christian. Your tip about leaving the bumper on during install is really helpful, especially since fitting the ends through the louvers can take a little extra maneuvering. It’s also great to hear the setup works well with your Stowmaster 5000. The install looks great, and we appreciate you sharing the picture! Where did you go for the first trip?

Christian

5/20/2026

@KateF Hudson Parcher County park in Rainier, OR

Kate F.

5/21/2026

@Christian I just looked it up, looks like quite the magical place! Thanks for sharing =)

by: Robert 01/06/2025

Came quickly and is very high quality. Great directions/video from road master makes the installation step by step easy to follow.
Skill level is probably at the intermediate level depending on experience.

Click to Enlarge

Robert One Year Later

1/7/2026

Everything related to my Mini towing system is working great after a year of use.i do wish I had bought a cover for the tow bar though. Keeping it clean would be easier with the cover. Great products and service from etrailet

by: Robin 11/21/2024

The #118-3 is a perfect fit on my 1995 Geo Tracker. When you pull off the removable arms you would never know they are there. The Quality is very good easy to put on all you have to do is drill 4 holes the tube on the base plate fits into the tube on the frame of the tracker and with the 2 bolts it is a solid fit. I was worried about the plate nut getting it inside of the frame but it went in easy when you put it over the frame tube and use a thin piece of metal to slide it in place. I’m very happy with it. I probably could of got it on without taking my bumper off but with only 4 bolts holding my bumper on it made it easier

Click to Enlarge

Robin One Year Later

11/25/2025

Working great these are durable tow bars Have no problems with them easy to hook up and tows vehicle without no problems .

by: Charlevoixboy 12/10/2025

2007 honda Element

Awesome delivery speed, and a well made base plate for my 2007 Element. Installation was a breeze (thanks to my son’s heated shop) and I had to do no cutting to make this fit. I had a Stowmaster tow bar that came with my RV and etrailer was able to steer me to the correct missing parts to make this a really affordable installation. Now to get out of this snow!

Click to Enlarge

by: Michael 12/03/2025 One Year Later

2004 Subaru Impreza

We towed our 2004 Subaru Impreza WRX STI 3000 miles last year, this is an ideal setup, discreet when not in use, solid, and easy to get on/off. Very please with the support I received from Roadmaster as one of the bolt was missing, was sent super quickly.

Click to Enlarge

by: James 07/02/2025 One Year Later

Replaced same part that was damaged in a crash. I had used my original one for close to ten years without issue. Fast shipping from etrailer.

James One Year Later

7/3/2026

New system working fine. As with previous system it requires towed vehicle to be nearly perfectly aligned straight behind motorhome to disconnect without considerable tension.

by: David 05/23/2025

The Base plate kit is well made and came with all the necessary hardware.Installation is relatively straight forward. I did have to enlarge two of the holes that didn't quite line up. But overall I'd recommend it.

David One Year Later

5/24/2026

It continues to work flawlessly

by: Steven 08/09/2026

Overall the installation was great, however the process of drilling 3 - 1/2" holes in that little bumper that has a Rockwell Hardness of about 60, seems to be a bit over the top.The instructions are spot on, delivery was great, the quality of product was accurate. I am a happy boy!

by: Thomas 07/29/2026

2015 Chevrolet Equinox

Fit and finish is great, the illustration for what you trim on the bumper isn't great but otherwise pretty easy install (I ended up measuring between the mounts on the draw bar and just trimmed accordingly)

Christopher H.

8/4/2026

Thanks for you feedback Thomas! Sounds like the install went smooth. Hope you have a great summer!

by: Larry 05/05/2026 One Year Later

I’ve been purchasing products from ETrailer since 2005 and all the products I’ve purchased have been a great value. The products mentioned above installed perfectly and with the direct assistance from ETrailer everything fit as suggested. I will always interact with ETrailer as needs present themselves.

Claire H.

5/7/2026

Thank you so much for the kind words and being a repeat customer with us! We look forward to helping you out with all your future adventures!

by: Brad 06/22/2026

After ordering the wrong crossbar, etrailer sent the correct one for our Mini Cooper quickly. However I did have to modify most of the holes as the cross bar didn’t quite fit (but close). I had to drill the three main bolt holes to 11/16 so that the bar would go over the Mini’s 3 main bumper bolts on both sides. The two lower bolt holes (each side), needed to be drilled out 3 sizes larger to accommodate the 4 bolts that come with the kit. I had to drill out the Minis lower holes to better align with the crossbars lower holes. I would also like to note it being a pain in the knuckles to reach one of the three (each side) bolts to put the stock nuts on the bolt and then try and get them tight. (The main bolt pattern for the upper bumper is diamond shape, one up tow bolts lower. (The lower “inside” bolt on each side is the one that is hard to get to and tighten.) Sorry I didn’t get picks, I was in a rush to get the car back together. There’s an angle piece on the cross bar that blocks the hard to reach bolt, it would be helpful if that could be made more accessible to reach.

by: Julie 05/30/2025 One Year Later

Purchased for a 1997 Subaru Impreza. Delivery was amazingly fast! I didn't have it installed until a few months later, as my travel plans had stalled. It didn't quite bolt right on, but was close, and a friend had to modify it some to make it work. I still hear a grating noise when I turn too sharp on one side, but otherwise it's fine.
The front connection plates didn't line up with the holes, so had to have those modified, as well, in order to line up and attach to the tow bar. Once the new holes were drilled, I was able to hook up and go.
It's relatively easy to connect after finding a way to do it alone.
I've towed from CO to TX and all over TX with it with no problems.

Click to Enlarge

by: Mike 08/16/2026

Install pretty easy. You will have to change directions of one bolt due to obstruction ( frame). Cannot torque a few of the bolts. These are the ones with wire attached.
Rock guard needed addition trimming from factory instructions.

by: Wesley 07/08/2026

The representative (Sarah) was very helpful and knowledgeable, the prices are very reasonable and all my items arrived on time. When I called with a question, she was very polite, friendly and genuinely sounded like she enjoyed her job. When I discovered one of the items I ordered wasn’t needed, getting help to return was hassle free. I would recommend etrailer to anyone that needs anything RV or trailer related. I will definitely do business with them again. I am impressed.

by: Todd MobileRVHelp 06/02/2026

2022 Chevrolet Trax

Not an easy install on a Trax but it is very well made and gives a clean look. I did customize by cutting down the 6 pin bracket supports to get it flush with front of the car.

by: Rob 01/19/2019 One Year Later

2019 Chevrolet Equinox

The Jeep project went very well everything fit great and worked well. I really love Roadmaster products and quality and your company is the best place to purchase them. I sold the Jeep and replaced it with a new 2019 Chevy Equinox 2.0 L AWD and just purchased and installed the following items from you and installed them, RM-156-25 & RM-156-75 Battery Charge Line Kit, RM-146-7 Flex Coil Kit, RM-523193-4 EZ4 Plate Kit, RM-88333 Custom Seat Adapter, RM-751489 Stop Light Switch Kit and a RM-98160 Second Vehicle Brake Kit w/brakeaway. All these parts were in stock and arrived quickly and normal with you people, I really enjoy the o-line vidios as I do all my own installs. Thank you so much for your great service.
I will attach pictures of my install, you will see how I was able to fab a bracket and attach it to the existing mount on the base plate to mount the brakeaway switch and the air connection for the brake system.
I also fabricated a tail light bar as I didn't want to use mag-lights or splice into the factory lights and bulbs installed into the lights would not work as the factory brake lights will come on when the brake system is applyed and the turn siginals would not be visable.
Thanks for all you do, I would and do recommend you people to everyone who needs your products. Rob

Click to Enlarge

Rob One Year Later

1/21/2020

Everything is working great, I installed a base plate kit, battery charging kit, stop light switch kit, second vehicle air brake kit w brakeaway and seat adapter on our 2019 Chevy Equinox and towed it about 14000 miles behind our motor home this past year and everything worked perfect not a problem with any product. These are great products, everything fit perfectly and performed perfectly. Thank you for great service and great products. Rob

by: Chris 03/15/2019

2015 Subaru Outback Wagon

This was the second base plate kit from etrailer that I have installed, the first being on our ‘03 Outback and this one on our new to us 2015 Subaru CrossTrek. As usual the response, shipping and delivery from etrailer was prompt and curious. They are my go to place for anything towing related.
Installation of this kit went well with only a few issues, most of which were related to our vehicle not the kit. I knew the car had been hit lightly on the LF corner, but could find nothing of concern body or frame wise when I looked the car over before buying it. Turns out the front bumper reinforcement had been tweaked a tad which made lining the bolt holes up with the holes in the base plates a tad challenging. This made the small angle brackets that go inside the frame heads tough to line up, but in the end it all fit. I did find that it was unnecessary to pull the washer reservoir or the left headlight to access the nut and washer for the long 1/2” bolt. You can easily reach and see the place from underneath after pulling the plastic encapsulation panel. When drilling that 1/2” hole be sure to angle the drill bit UP a tad otherwise you may end up having to grind a flat on the side of the large, thick washer as you can see in my picture from underneath. I used shrink wrap over the nut and bolt since there’s a wiring harness right against it. The picture of the baseplate differs a bit from the pictures so I guess they made some changes. All in all a great kit!

Click to Enlarge

Chris One Year Later

3/16/2020

It’s been a year now and probably 7,000 miles later and everything has held up perfectly despite some darn rough roads between MD and Albuquerque, NM and back.

2221

true

Show More Reviews

See what our Experts say about this Roadmaster Tow Bar Base Plate

Do you have a question about this Tow Bar Base Plate?

Can a 2003 Ford F-150 2WD Be Flat-Towed
The best place to look for flat-tow compatibility is in your owner's manual but I do show certain models of a 2003 Ford F-150 being flat-towable. The Roadmaster Crossbar-Style Base Plate Kit part # 492-1 (2WD Only, No Harley Davidson, Lightning, or STX) is what I recommend for a base plate and this will work well with a tow bar like the Roadmaster StowMaster Tow Bar part # RM-501. Then for the lighting you can use the Roadmaster Standard Magnetic Tow Lights part # RM-2120. I have attached...
view full answer...
Parts Needed and Guidelines to Flat Tow 2002 Ford F-150 V6 4.2L 5-Speed Manual Transmission
From my research, this is only true for RWD vehicles. So, as long as your 2002 Ford F-150 V6 4.2L 5-Speed Manual Transmission is a RWD, you can flat tow it as is, without any distance or speed restrictions and no other special instructions or additional parts are necessary. If you were unable to find this in your owner's manual, I highly suggest confirming the above information with a local Ford dealer. To flat tow your truck, you will need a set of base plates, a tow-bar, safety cables,...
view full answer...
Parts Needed to Flat Tow a 2001 Ford F-150 Behind an RV
I checked the owner's manual for the 2001 Ford F-150 and you can flat tow the truck as long as it is a 2-wheel drive model. Also there is this statement: "If a distance of 80 km (50 miles) or a speed of 56 km (35 mph) must be exceeded, the drive shaft will have to be removed while the vehicle is being towed. Ford recommends the driveshaft be removed/installed only by a qualified technician. See your local dealer for driveshaft removal/installation." And 4x4 vehicles with electronic shift...
view full answer...
Parts Needed to Flat Tow a 2004 Ford F-150 4x4 Behind an RV
For your 2004 Ford F-150 4x4, we can offer you everything you will need to flat tow the truck behind your RV. First you will need a base plate kit. I recommend # 495-1A that you referenced. As you know, when not in use, the part that is visible can be removed. (Note: if you have a Heritage series F-150, use base plate kit # 492-1.) I have included a link to the instructions for kit 495-1A below. Next, you will need a tow bar that is compatible with the base plate kit. The RoadMaster StowMaster...
view full answer...
Parts Needed to Flat Tow 2003 Ford F-150 Rear Wheel Drive
To flat tow a rear wheel drive 2003 Ford F-150 you'd need to install a drive shaft disconnect which we do not offer. But we do offer everything else you would need. For a base plate kit you'd need the # 492-1. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy...
view full answer...
Recommended Base Plate Kit for a 1997-2003 Ford F-150
The base plate kits for a Ford F-150 will be the same from 1997-2003 with the exception of Lightning, Harley Davidson, and Diesel editions. As long as you do not have one of these editions then I recommend using the Roadmaster XL Base Plate Kit part # 456-15 for 4 wheel drive (4WD) models or part # 492-1 for 2 wheel drive (2WD) models. Unfortunately, we do not carry any universal base plate kits therefore this will be your best option. For a tow bar that will work with either set of the...
view full answer...
Recommended Tow Bar For Flat Towing A 2000 Ford F-150 2WD
According to the online manual for a 2000 Ford F-150 if you have a 2WD model with an automatic transmission you will need to remove the driveshaft if a distance of 80 km (50 miles) or a speed of 56 km (35 mph) is exceeded. If you still want to flat tow your 2000 Ford F-150 2WD then you can use the etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates - 2" RV Mount - 10,500lbs # e64ZR. This tow bar features a non-binding design and telescoping, self-supporting arms to make...
view full answer...
Parts Needed to Flat Tow a 2002 Ford F-150 Super Crew 4x4 Behind a Motor Home
First, the Roadmaster base plates # 492-1 will only fit the 2-Wheel drive versions of the 2002 Ford F-150 so it will not work with your 4-Wheel drive model. For a 4-Wheel drive model that will allow you to use the Guardian Rock Guard # RM-4000, use # 456-15. If you also need a compatible tow bar and the truck weighs under 6,000 pounds use the Falcon 2, # RM-520. If it weight between 6,000 and 10,000 pounds use the Blackhawk, # RM-422. And for 10,000 pound safety cables use # BX88197. For...
view full answer...
Supplemental Braking System For 1998 Ford F-150 Being Flat Towed
It cannot, as the system you mentioned is for trailer brakes; what you need is a supplemental braking system designed for flat towing, and for your 1998 Ford F-150 I like the Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494. This will activate the brakes in your F-150 and is a portable system which means it isn't a permanent install so if you change your towed vehicle you can still use it and not have to buy a brand new system. The other parts needed to flat tow your...
view full answer...
Base Plates, Tow Bar, Wiring, Safety Cables, Braking System to Flat Tow a 2001 Ford F-150
First, you will need to add base plates to your 2001 Ford F-150. If you have a 2-wheel drive model, you will need # 492-1 (will not work on Lightning models). If you have a 4-wheel drive model (does not include diesels), you will need # 456-15. Next, you will need a tow bar that is compatible with XL style base plates. I have included a link to the available tow bar options that will work. I recommend the RoadMaster Falcon 2, # RM-520, or, you can use the RoadMaster StowMaster, # RM-581,...
view full answer...
Parts Needed to Flat Tow a 2002 Ford F-150 Super Crew
The Roadmaster base plate adpater bar is designed to fit base plates that would be on a specific vehicle and does not attach to the vehicle itself. Before you do anything else, consult the truck owners manual to determine if it can be flat towed and if there are any special requirements. To add base plates on a 2002 Ford F-150, if it is a 2-wheel drive model and is not a Harley Davidson or Lightening model then you can use # 492-1 for base plates. For a 4-wheel drive that is not a diesel...
view full answer...
How Does The Roadmaster XL Base Plate Kit, # 492-1, Install On A 1997 Ford F150/F250
The Roadmaster XL Base Plate Kit, # 492-1, will have two brackets that will attach to the vehicle frame. One on the drivers side and the other on the passenger side. It gives two attachment points for a tow bar to connect to. When towing, the towed vehicles weight should not exceed 40 percent of the towing vehicles weight. The towed vehicle will be in neutral and the steering wheel must be unlocked. Check the vehicle manufacturers instructions for the proper procedures to prepare the...
view full answer...
Can 2006 GMC Envoy Flat Tow 2001 Ford F-150
Looks like the towing capacity of your 2006 GMC Envoy is going to be between 5,200 to 6,100 lbs and it looks like your 2001 Ford F-150 will weigh between 3,935 to 4,994 lbs so the Envoy would be able to tow it. First thing you'll need is a base plate kit confirmed as a fit for your 2001 Ford F-150 which for if you have a 2 wheel drive truck you'd want the part # 492-1 or if you have a 4 wheel drive # 456-15. In addition to the base plates, you will also need a compatible tow bar, safety...
view full answer...
Base Plate Kit, Tow Bar, Safety Cables, and Light Kit to Flat Tow a 2000 Ford F-150
To flat tow a 2000 Ford F-150 with a tow bar like the Tow Ready Adjustable Tow Bar, # 63180, you will first need a base plate kit. If you have 4-wheel drive, use base plate kit # 456-15 (will not work with a diesel). If you have 2-wheel drive, use base plate kit # 492-1 (will not work with Lightning models). You would then need to add Roadmaster Base Plate to Tow Ready Tow Bar Adapter, # RM-025, to be able to use the Tow Ready tow bar # 63180. Keep in mind that this tow bar is rated for...
view full answer...

Do you have a question about this Tow Bar Base Plate?

Info for this part was:

Written by:

Lindsey S

Expert Research:

Michael H

Expert Research:

Jeff D

Expert Research:

Jameson C

Updated by:

Adele M

Updated by:

Wilson B

Updated by:

Mike S

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.