Can 2006 GMC Envoy Flat Tow 2001 Ford F-150
Updated 03/25/2019 | Published 03/23/2019 >
Products Featured in This Question
Question:
Can my 06 GMC envoy 4 wheel drive tow a 01 f150 Ford 6 ft bed safely
asked by: Liza R
Expert Reply:
Looks like the towing capacity of your 2006 GMC Envoy is going to be between 5,200 to 6,100 lbs and it looks like your 2001 Ford F-150 will weigh between 3,935 to 4,994 lbs so the Envoy would be able to tow it.
First thing you'll need is a base plate kit confirmed as a fit for your 2001 Ford F-150 which for if you have a 2 wheel drive truck you'd want the part # 492-1 or if you have a 4 wheel drive # 456-15.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers for the tow bar we have the Roadmaster Falcon All Terrain kit part # RM-9243-1 which comes with all of that as one part number. The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Wiring and Brake Controller do I Need for My 2005 Ford F-150 with 4 Flat Wiring?
- Q&A: Alternative 7-Way Connector for the Kia R0F67 AC600 on a 2025 Kia Carnival
- Q&A: What Wiring do I Need to get My 2022 Toyota Highlander Ready for Redarc Tow-Pro Brake Controller?
- Q&A: Recommended Hitch and 7-Way Connector for a 2024 Subaru Outback


