Demco Tabless Base Plate Kit - Removable Arms
This item does not fit your vehicle
2011 Ram 3500
These items fit your vehicle
2011 Ram 3500
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you like your setup to look clean when you’re not towing, this kit keeps the front end tidy. The tabless design means there’s no bulky crossbar or brackets sticking out—just a smooth, factory look. The tabs stay attached to your tow bar, so nothing protrudes from the bumper. Snap-in high-density polyethylene covers keep dirt and debris out of the base plate receivers, so the arms slide in and out easily every time you hook up.
Getting ready to tow doesn’t have to be a hassle. Each arm inserts into the receiver, twists to lock, and secures with a pull pin for a dependable connection. To disconnect, just pull the pin, twist, and slide out. It’s simple enough to do on your own whether you’re in your driveway or at the campsite. Bracket spacing is 18-1/4" center-to-center and bracket height is 14", so you can plan your tow setup around those measurements.
This base plate bolts directly to the chassis with no welding required. The sturdy steel design spreads towing forces evenly to help reduce stress on suspension components while keeping everything solid mile after mile. Owners trust this heavy-duty setup for long-distance towing because it feels secure from hookup to destination.
Already have gear you like? This kit works seamlessly with Demco, etrailer, and Blue Ox tow bars without an adapter. It can also be used with Roadmaster tow bars when paired with the correct adapter (DM9523036, DM9523062, DM9523014, or DM9523023; sold separately). An included electrical bracket makes it easy to mount a round connector plug at the front, keeping your wiring organized and ready to connect when it’s time to roll out.
For anyone comfortable turning wrenches, this is a straightforward bolt-on project. No welding is required—everything mounts securely to factory points on the chassis. The kit includes clear instructions and all necessary hardware for a clean install that’s ready for thousands of miles of towing confidence.
Ratings & Reviews
This base plate is of exceptional value and construction. It was fairly easy to install on my 2008 Jeep Wrangler by myself but would have been quicker if I had an extra set of hands. Overall I am extremely happy with how the base plate looks and the customer service was above and beyond expectations. I would recommend the base plate and you don't have to look anywhere else than etrailers for what you need.
Great fit and heavy-duty product.
This is the third Demco baseplate I've purchased for three different tow vehicles, all were exceptional quality with very clear instructions as you can see in the photo it was a very involved install. Thanks for a very good product at a great price.
The face plate fit very well on my 2024 Jeep Grand Cherokee L, Overland. Even though on the Etrailer website, it says it will not fit, but it definitely does. The instructions are a little vague about which way to turn the center crossbar. In my case, I had to turn it upside down from how it shows in the parts layout on the front page of the instructions. Also the photo below showing the installation without the bumper cover on, has it the wrong way for my vehicle. I turned it over after I took that photo. I opted not to cut up the lower honeycomb grill and just leave it off, which allowed me to install the 6-pin connector and the breakaway switch very neatly with the supplied bracket. And if I ever remove the face plate, I can put back the original honeycomb grill and the vehicle will be 100% back to as purchased. I did not have to drill any holes whatsoever for the installation.
The quality and fit up was great, the only comment is the safety cables are too short and not able to use them. If you are looking at this product i would recommend it, just keep in mind you have to buy cables
Quality product with fast free shipping. Although it arrived with damage to the box from the baseplate moving around during shipping, there was no damage to the baseplate itself. Installed relatively easily according to the instructions.
Super Duper customer support! I had an issue with a product and Lauren got me all set up on what I needed to get the job done in a fast time frame.
Product seems very well designed and manufactured. Minor reaming of a couple of the holes was needed to align with truck frame. We used it with a Blueox tow bar so towing was flawless. I highly recommend this base plate.
This was NOT the easiest install. Lots of grinding and cutting of stock parts. Then the effort required to align all the holes after said grinding and cutting took considerable effort. eTrailer needs to do specific video on this product so buyers know what to expect. I can say this product is worth the effort but boy oh boy know what you’re getting into.
Very easy to install except for one item. The core support bolt holes need to be moved out about 1/4 inch. Had to trim the hole on the plastic shutter surround. Otherwise great fit on 2026 Ford Ranger. I’ve done many of these and this was the easiest. Price is definitely too much. Haven’t towed with it yet but looking forward to it.
Order was shipped and received timely. Both products purchased look to be well made. Haven’t installed yet currently using a demco set up on a 2001 Cherokee sport. Up graded to a 2020 wrangler needing a new base plate and lighting. Eager to install on the new buggy!
Lock tight both TUBES hard as a rock.
YOU Don't need lock tight at all as all threads in the nuts are lousy and no way to hand start anything. Had to run 4 or 5 bolts through each nut with an impact to free them up a bit. They should have piolet starter on each bolt and all threads should be clear enough for a hand start. This kit worked well as it does not require the bumper to be removed. BUT: LOUSEY BOLTS AND NUTS ADDED AT LEAST 30 MIN TO FIGHTING EVERY BOLT TO GET IT STARTED. 5 STARS FOR THE KIT. 1/2 STAR FOR THE BOLTS WITHOUT PIOLET AND NUTS THAT CAN NOT BE HAND STARTED.
This does not fit my 2025 ranger. I attached are a few images of the mounting location for the 9519343 base plate on my 2025 Ford Ranger with the Lariat trim and the 2.7l v6 motor. The aluminum colored piece interferes with the horizontal bar connecting the actual base plates. The base plate mounting holes are 31.5" apart, whereas the receiving nuts on the truck frame are 30.5" apart. I am returning this and have ordered a Blue Ox base plate.
Straight forward install. I have towed the Maverick about 7000 miles with no issues. The pins are a wee bight tight when mating to my Blue Ox tow bar. But that is loosening with time. A nice improvement would be a heavy duty mount for the umbilical plug
Bottom bolts seem kind of a weak install in my opinion, I was able to put my facia back on with not cutting so that was good.
I use only Demco baseplates as they are the only brand that mount with no cutting or drilling. The Excalibar tow bar is very well made and handles my Jeep Gladiator with ease. It's also very simple and easy to hook and unhook. The excellent "how to" videos from etrailer sure helped me make the correct purchase decision.
I would give the tow bar a minus numberif possible. I bought it in hopes of not cutting up the shutter housing on my 2025 Maverick Hybrid. Well the bolt holes did not line up. I spoke with the Demco Engineers about the issue and they said that I must have a bent frame. My vehicle was two weeks old from the manufacturing date and all the rest of the pieces in the front assembly fit perfectly from Ford. I lad less then 200 miles on the unit. I made some cuts in the bar to allow more movement with the approval of Demco and still I could not get the front facia on. I called installers and they said they just cut away whatever is needed to get a tow bar on. None that I talked to at 3 places had as yet done this model installation. E trailer accepted my return and I put a roadmaster bar on.
The base plate kit was fairly easy to install; however, I did need to space out the main base plates with washers of about a good 1/8th inch to clear the lower radiator. I also fabricated an L shaped shelf and u-bolts to attach to front of main cross member to mount 6 pin connector and break-away switch. All appears to be good and solid. Have not attached to RV yet as I am still working on wiring.
Now that I have actually used the tow bar and base plates I am very happy with my purchase. Sets up easy and when not in use the cover plates make for a great appearance on the truck.
Was able to install without issues using 2 washers between base plate and the upper brace and none on the bottom, otherwise followed the video. Works great!
Just installed the Demco Tabless Base Plate and included 6 pin wire bracket. It was very straightforward and anyone who is a little mechanically inclined, can do it with ease. The etrailer video was incredibly helpful. I followed it step by step and had no issues. I love that it is a direct bolt-to-frame base plate and does not need any modifications. I spent a bit more time cutting out the gravel guard to form-fit the tabless connectors. The adapters are sleek and blend right in to the front end. Love how it turned out.
I gave this 5 stars based on design and durability.Installation, however, is somewhere between 3 and 4 stars. Installation can be a real challenge, and even the best back yard mechanic might be a tad frustrated. The biggest problem in installation is NOT installing but getting ready to install. Removal od the tow bar hooks took more time than installing the base plates. We're talking a 2018 F-150 XLT Sport 4X4 crew cab. The pics show the finished product and the location of the safety can\bles.
Fast shipping, quality product at an affordable price.
I have bought several items from your company & I am more than happy with the friendly , courteous service & fast shipping time. If needed I will be sure to do business with etrailer in the future.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ken
3/25/2022
Just as it should, no complaints