To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.
Features:
Specs:
Setting up these tabless base plates for use with your Demco tow bar is fast and easy. Just remove the attachment lugs from the ends of your tow bar arms and replace them with these tabs. Then you can just insert the tow bar arms into the base plate receivers to hook up. There's no need to remove the tabs from your tow bar, so you won't run the risk of misplacing tabs. And because the tabs remain on your tow bar at all times instead of protruding from your vehicle , your car maintains a clean look when it's not being towed.
Using the Demco Tabless base plates to attach and remove your tow bar couldn't be easier. With the base plate tabs attached to your tow bar arms, simply insert the tabs into the receivers on your vehicle and twist to lock them in place. Insert the included pull pins to add an extra layer of security, ensuring the tabs stay put. To remove each arm, simply tug the pull pin to disengage the lock, twist the tow bar arm, and pull the tab out of the bracket.
Keep dirt and debris out of the base plate receivers with the included covers. These high-density polyethylene covers easily snap into place over each pull point when your tow bar is not attached. Limiting internal corrosion makes it easier to slide the tabs in and out and helps to prevent seizing so that the tabs don't get stuck.
If you have a Demco Kwik-Tow tow bar or a tow bar from a different manufacturer, an adapter may be available. Demco makes adapters for use with other tow bars so that you don't have to go through the added hassle and expense of replacing your tow bar when outfitting your new towed car with base plates.
Type of Tow Bar | Adapter |
---|---|
Roadmaster Sterling All-Terrain, Blackhawk 2 All-Terrain, and Falcon All-Terrain | e98983 |
Roadmaster Falcon 2 and Tracker | Use both DM9523128 and DM9523036 |
Roadmaster Nighthawk All-Terrain | DM9523062 |
Blue Ox (excludes Embassador) | No adapter needed |
Demco Kwik-Tow | DM9523128 |
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (223 Customer Reviews)
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.This is my second set of Demco tabless base plates. First for a 2019 Ford F-150 and now for a 2023 Ford F-150. I like the fact that they are easy to install and are are basically hidden. My only complaint is that Demco makes the mounting holes over size. I assume to aid in installation however it allows for the base plates to move around some after installation even when properly tightened. This caused some problems with the installation of my Roadmaster tow defender as the tow bar mounts spread apart.
Got these because the BlueOx were out of stock. Seemed to be much easier to install on my 2021 F150. Did require drilling one hole.
Very high quality.
Very quick delivery.
Very good customer service.
I will order from etrailer again, I'm sure
The reason I didn't give a 5 star is ecause I had problems with the rust on the inside were the receiver. I would think the holding round stock should be made out of stainless. I have to grease the pins before I insert them.
easy to install on the truck frame and the removable arms help hide the base plate.
Super Service and parts fit perfectly.
Very good quality.
Easy to use and install. However, after just one year the paint is cracked and flaking and the product is rusting
Nicely packaged
Works perfectly
The quality of this base plate is very good. On my 1990 Cherokee the spacing of the 1/2" bolt holes required me to enlarge the holes for proper fit. The instructions are shamefully poor quality as are the installation photos in the instructions. Demco needs to improve.
The base plates fit nicely but the covers are a poor fit. It would make sense to me that the covers covered the whole base plate.
Thanks, Randy
Received on time and installed as directed. I'm 78 and only had one problem, that of having to bend down a tab on the vehicle frame. Had to go buy a punch. However, the left base plate front holes for the tow bar attaching pin was not in alignment. The pin would not go through. Contacted etrailer and received a replacement in no time. Removed the bad one and reinstalled the new one. Then took the vehicle to my hitch guy for brake wiring. He double checked my work and said everything was in great order and a good fit. With the virus lockdown, I have not towed other than home from getting the brakes set up. But that worked ok.
Installation went smoothly. Instructions are spotty and not always helpful, but there are videos on YT.
We used this flat-tow base with our 2013 Spark with no problems until the car was wrecked (nothing to do with the towing equipment) and we had to get a new car, new base kit, and lighting kit. Hopefully we'll still have this car when it's time for a one-year review.
Received shipment fast. I ordered the wrong adapters and call customer service right after delivery. Got excellent service from Brittany ordered the right adapter, got a return label while on the phone to my email. Installed the demco base plates with a few problems. Fit was tight but nothing a small mallet couldn't handle. They do mention in instructions that you may need to elongate one of the holes. Mine was for a 2016 GMC 2500. Definitely need to make hole bigger on the truck frame. I would do it before inserting the baseplate. Otherwise great product good tight fit.
Etrailer has proven to be the best place to purchase all my towing needs! They sent my first order very quickly. I decided to do a second order for another vehicle and again perfect service and top quality parts! The communication is A++++ and I highly recommend Etrailer.
Great service - ordered Sunday night, delivered Wednesday lunch time, installed Wednesday afternoon. Excellent information, instructions - took about 4 hours, had to file 2 bolt holes a slight bit, but the fit was very good.
I am very happy with the baseplate and would recommend it to anyone.
Before and after pictures attached.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael W.
1/28/2024
These have worked flawlessly for the past year. It is exactly what I needed and expected. Hey are built tough and I expect them to last me many years to come