Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re towing gear that matters, you want a wheel that won’t quit early. The Dexstar Solid Center Steel Wheel is rated for 1,660 lbs and meets Department of Transportation standards. With a 13" diameter and 4-1/2" width, it gives you dependable strength for hauling without worrying about collapse or flex under weight.
Nothing kills a good wheel faster than corrosion, so Dexstar finishes this one right. A durable white powder coat is baked over an e-coat primer, sealing out moisture and road grime. That combo keeps the surface clean and smooth even after years of exposure to rain, sun, or salt.
Getting the fit right is key to safe towing. This wheel uses a 4 on 4" bolt pattern, a 2.65" pilot diameter, and a 0 offset for straightforward installation on compatible hubs. The wheel bolt size is 1/2"-20, so you know exactly what hardware it’s built for.
The solid center construction gives this wheel extra rigidity compared to spoked designs. That helps it stay true when loaded down and rolling long miles at highway speeds. It’s a simple, strong setup that keeps your trailer running smooth and stable trip after trip.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number AM20202. This is the Americana, 13 inch by four and a half inch, solid center, steel trailer wheel with the four on four bolt pattern and white in color. This wheel is a sturdy steel construction. Has a nice white cover coat finish over an e-coat primer on the whole wheel. This will give excellent corrosion resistance. This design is the solid center design.
It doesn't have any spokes or holes. This is a high quality wheel that will meet the Department Of Transportation specifications. A few dimensions on this. It is a 13 inch diameter and a four and a half inch wide wheel. When you go to measure a wheel what you're going to be measuring is where the tire seats on the wheel. When you mount a tire onto this wheel, the beads would actually sit right here around the beads seats.
When you measure the dimension, the diameter is going to be measured bead seat to bead seat, so inside the inside, not outside the outside. Basically if you put a ruler on bead seat to bead seat you can see 13 inches diameter. We'll do the same on the width, inside the inside or bead seat to bead seat. In this case the width of the wheel is going to be four and a half inches. So 13 inch diameter, four and a half inches wide. Now the bolt panel on this as you can see is a four lug, four inch bolt pattern. The best way to measure the bolt pattern, especially on a wheel that has even number of lugs like in this case four, just pick any hole then measure from that hole center directly across to the center of the hole right across from it.
If we go center to center you can see four inches. Four on four inches is the bolt pattern. It does use a wheel bolt size of a half inch by 20. The pilot hole diameter, right here, this is the large hole in the center that goes over the hub on your trailer. The diameter on that is going to be 2.84 inches, and the right capacity on this wheel is 1,660 pounds. But that should do it for the review on part number AM20202, the Americana, 13 inch by four and a half inch, solid center, steel trailer wheel with the four and four inch bolt pattern.
.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews

Heather A.
5/26/2026
Nice Fuso! Tell us more about Green Giant... I would love to hear more.

Mike L.
10/21/2026
We'd love to see photos Mitch, please send them in!

Leon R.
8/21/2017
This wheel has performed perfectly.

Joseph
2/24/2015
Fantastic and thank you for asking . As soon as the Spring gets here hoping for some more designs and projects using your rims wheels. Thanks again :- -Joseph-
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Dino B.
9/23/2025
working great still